Half floor heating and half heating at home will not work

Although winter has passed, it has now entered the Spring Festival period. But since many people have been asking before, which heating method is better? Now I'm going to summarize which one is better.

There are generally air conditioners, floor heating and radiators to keep warm, but which one is cheaper and safer?

1. Radiators.

The advantage of radiators is that they can heat up as soon as they are turned on, and sometimes they need to drain some cold water, but not much. The radiator is more comfortable to use and will not be very dry.

Radiator radiator heats up as soon as it is turned on, sometimes you need to drain some cold water, but not much. The overall comfort is good, not too dry.

If you want to install, you can plan it before you renovate. Under normal circumstances, a house of 100 yuan costs about 20,000 yuan.

The radiator is also hot water, it has to reach more than 60 degrees to evenly dissipate heat, it needs to consume more gas, take 100 room temperature to reach 20 degrees, generally 15m of gas, a month to have more than 1100 yuan.

2. Floor heating. Floor heating is mainly laid under the floor or under the tile, relatively speaking, the heat dissipation of floor heating is relatively uniform. However, one thing to note is that before the renovation of your new house, you should be prepared to lay floor heating, and do not think about this matter after the decoration is completed.

Floor heating ranges from 10,000 to tens of thousands, depending on the type of floor heating, generally 100 floor heating ** in about 25,000.

Compared with radiators, underfloor heating only needs to reach 45°C to heat the room. The conversion efficiency of floor heating is relatively high, and the gas cost is also less. Heating a 10-square-meter room by 20° is less than 1,000 yuan a month.

3. Air conditioning. In fact, the air conditioner also has the effect of providing heating, as long as the heater is turned on, and it will come immediately. In a month, it may cost six to seven hundred yuan. However, it has the advantage that it can be installed and replaced at any time. The bad thing is that it will make you feel dry.

To sum up, it may be that the cost performance of floor heating will be better than the other two, and the comfort is also better, and friends who do not have decoration can consider it. But if your home needs floor heating for less than a month in a year's weather, it may be good to install an air conditioner, and the hot and cold effect will come.

Yes, but if it's not a separate space, the heat is lost quickly. Specifically, you can ask Jingfeng HVAC.

Why not, okay; Of course, there is absolutely no floor heating in all its comfort.

The floor heating can be turned off halfway, but it is recommended that you do not do it, because if the installation is not standardized, it is very likely to cause condensation in some areas, which will cause problems such as floor bulge. Of course, if it is equipped with a thermostat.

It is recommended that you turn the temperature down; In the case of manual valves, only the return valve needs to be adjusted smaller.

This effectively reduces the flow of hot water in the pipes, and the heat of the underfloor heating will also be reduced. However, when adjusting the valve, it is necessary to pay attention to the need to adjust the inlet valve and the return valve at the same time, not only one, but also slowly close them down, and stop when the adjustment reaches the halfway position. At the same time, in the process of adjustment, it is necessary to pay attention to the change of floor heating temperature, see the rise and fall of the temperature, and stop when it reaches the ideal state.

Precautions for the use of floor heating:

1. Check whether there is any dripping.

Although the developer of Chunqiao or the heating company has indicated that the floor heating system is qualified during the house inspection, it is very likely that there will be man-made damage during the renovation process, which will affect the normal operation of the floor heating. Because of this, before using floor heating for the first time, we should carry out a pressure test on the pipeline, the main purpose of which is to see if there is dripping, water leakage and other phenomena.

2. It can't heat up suddenly.

Whether you're using it for the first time or have used it for a while, don't set the system temperature too high when the underfloor heating is turned on. In the case of low room temperature, the sudden increase will be unacceptable to the system components, and there is no slow process, which will not only damage the components of the floor heating, but also affect the service life of the floor heating, and will also cause the floor to deform and deform.

Summary. First of all, it can be used, but its installation may be a little more cumbersome and involve some related maintenance, so this kind of complicated treatment is generally not recommended.

First of all, this is a bad old word can be used in order to be used, but its installation may be a little more troublesome, and involves some related maintenance situations, so it is generally not recommended to use this complex handler liter.

In general, it is better to use this single method of egg retrieval and egg donation, so that it should be simpler to reduce the occurrence of this problem in this use and maintenance, so the simplest is the best way to match the hole.

My home is decorated, and I want to install half floor heating and half bright heating, can I ask if it is possible?

This is okay, and this kind of maintenance in the future will be more troublesome.

What to repair later.

General underfloor heating pipes may be a little more troublesome to repair.

Summary. Hello, it is okay to install it like this, but such a mixed installation must be designed by the installer, otherwise it is easy to affect the entire heating system.

Hello, it is okay to install it like this, but such a mixed installation must be designed by the installer, otherwise it is easy to affect the entire heating system.

Commonly used mixed schemes: 1. Floor heating + room radiator in public areas in public areas such as public areas such as land covers at home, floor heating does not affect the effect of indoor decoration, and can also meet the heating needs of the elderly and children. The radiator in the room can heat up quickly, which is very suitable for young people who come home from work, and is stylish, comfortable and energy-saving.

2. Room floor heating + bathroom radiator: The bathroom radiator can be used in the bathroom, which can play the function of drying towels and clothes, which is very practical. It is usually done to connect a set of radiators directly on the floor heating line in the bathroom. Of course, the bathroom can be directly installed with underfloor heating.

3. Use room floor heating + vacant room radiators, and some warm rooms such as guest bedrooms, studyes, and attics can be installed in vacant or low-frequency rooms. Frequently used rooms are equipped with underfloor heating, such as living rooms and bedrooms.

Kiss! Hello, happy to answer your <>

The reasons and solutions for half of the floor heating and half of the radiators in the family are not hot at the end of the radiators are as follows: 1. The radiators are hollow, and they are a piece of water that is spliced together to form a whole, or multiple water pipes are connected in parallel or in series, no matter which case it is, because it will form a highest point, it will collect air at the top, resulting in air blockage. This causes some of the radiators to be hot and some not to be hot.

Solution: If the radiator produces air blockage and is partially not hot, we can solve the problem by venting the radiator separately. Generally, a release valve will be set at the top of the radiator, and it is good to unscrew the air, but it should be noted that the air should be cleaned until hot water flows out.

If there is no exhaust valve on the upper part of the radiator, you can consider adding it yourself, or find a high pipe connected to the radiator to bleed. As long as the air in the radiator is discharged, the problem that the heater is not hot when half of it burns is solved. 2. Radiator internal rust blockageAt present, although many radiators have certain anti-corrosion characteristics, they will still corrode in the process of long-term use, especially some steel radiators, which are extremely corroded.

In addition, the water in our heating system itself will also produce scale during the heating process, and it will also be filled with some sediment and other dirt. These dirts such as rust, scale, and sediment will adhere to the internal pipes of the radiator, resulting in the blockage of the radiator and the problem of poor water circulation, which will also produce the phenomenon that half the temperature is high and half the temperature is low. Workaround:

If half of the radiator is not hot by deflation, we should consider that the inside of the radiator is blocked. In the case of blockage, the radiator needs to be removed and then the inside of it cleaned and dredged. It is not recommended to do it personally, it is recommended to ask a professional heating cleaning master to use cleaning equipment for cleaning.

And it is recommended to use the cleaning method of physical pulses. After cleaning the radiator, we reset the installation, and then deflat, we can solve the problem of half not heating. 3. Wrong installation of radiator inlet and outlet Radiator also has strict import and export connection requirements, not that the import and export can be mixed.

It has several ways according to the needs of the user, for example, the upper and lower back, the lower for the next back, etc., if the heating installation master accidentally installs the inlet and outlet of the radiator wrongly, it will also lead to the problem that the radiator is half hot and half is not hot. This situation mostly occurs in newly installed heating projects, and half of the heating is half hot and half is not hot in the first year, which is likely to be due to the wrong installation, such as the problem before the wheel and then the problem, which should be the above two reasons. Workaround:

For the installation error of the radiator inlet and outlet pipes, our solution is to correct the installation after dismantling and modification, as long as the corresponding pipelines are connected according to the normal water inlet and outlet water, the situation of half hot and half not hot can be solved. Hope mine can help you <>

Do you have any other questions?

Underfloor heating can be turned on and off in half, but it is not recommended. Because if the installation is not standardized, the floor heating is turned on and off half, which is very likely to lead to condensation in some areas, and cause problems such as floor bulging from blind staring. If you have a thermostat, consider lowering the temperature.

If it is a manual valve, the valve at the return end can be adjusted smaller.

Note that when using geothermal heating, the surface temperature should not exceed 28, and the water pipe temperature should not exceed 45. If the fruit exceeds this temperature range, it will affect the service life and service life of the floor.

As the season progresses, when the indoor heating system is no longer needed, it should be noted that there is also a process of shutting down the geothermal system. The cooling process of the floor should also be gradual and should not drop suddenly, otherwise it will also affect the service life of the floor.