Ask a novice driving question, what should I do if I see a traffic light vehicle?

The car has kinetic energy while driving, and we have to consume the existing kinetic energy in the car when we stop, especially if you say "suddenly". Then it means that it takes a shorter time to consume the kinetic energy.

These are the steps required to consume kinetic energy:

1. Undo the kinetic energy** (so the throttle must be released).

2.Increased consumption of the road (in effect, applying the brakes to consume the existing kinetic energy).

Generally, when the speed is slow, the braking is enough to consume kinetic energy, but when the speed is fast, the efficiency of reducing speed purely by braking will be relatively low, so it is necessary to loosen the throttle to let the wheels rotate with the engine and consume kinetic energy. At this point, the engine actually acts as a second brake.

As for what gear you need to put on, if you have already put on the gear, you only need to release the accelerator and press the brake directly, because if you take the first or second gear when the speed is fast, it is easy to cause tooth fighting. When in neutral, you should hang a gear similar to the speed of the car, loosen the oil and step on the brakes, and don't step on the clutch when you put it into gear.

And a reminder; In any case, the car is not allowed to slip into neutral gear, which can easily burn the contents of the gearbox. In order to save some gas, you will have to pay a lot of money when the time comes.

1, you hang the neutral gear, just step on the brakes directly, if you don't worry, shake the gear lever left and right, and then have nothing to make a habit, hang up the neutral gear and shake the gear lever left and right in case you don't hang into the neutral gear out of the accident 2 brake to the 2nd gear range, when you leave the contract, hang the gear loose clutch slowly, save a sudden flash of you.

1: Exercising?

It's impossible to take a gap in exercise.

If you open more, you'll be cooked. There are so many problems

1.First of all, to see the traffic lights correctly, you must first confirm your lane. You can see the lane signs. Usually, the straight arrow in the middle is a straight lane, and the turn lanes on the left and right are curved arrows.

2.Once you've confirmed your lane, check the traffic light indication for that lane. A straight arrow on a traffic light indicates a straight lane signal.

If you look at the straight arrow on the straight, you can pass with the straight arrow on the green light. The red light should stop and you can't cross the intersection. Similarly, if you are in a turning lane and look at the light of the turn arrow, the green light can turn and the red light should stop at the intersection.

Most intersections only have left turn lights. At this time, generally speaking, as long as there is no U-turn sign, you can make a U-turn at any time, which will not affect the normal driving of the vehicle and ensure safety. Many road barriers** change from solid to dashed lines when approaching intersections, allowing vehicles to make a U-turn in this area.

3.How to stop at a traffic light while driving. When stopping at a red light, pay attention to it, if our car is the first car, the distance from the stop line should be appropriately larger, we can't run the red light, and we have enough distance to start when the green light is on.

If there are many people in front of us, the distance between us and the car in front should also be as large as possible, so that we can not only guarantee safety, but also have enough time and distance to observe the dynamics of the car in front of us and ensure a smooth start.

4.When waiting for the traffic light, if the time is less than 20 seconds, you can press the clutch with your left foot and brake with your right foot; If the time is longer than 20 seconds, shift to neutral and pull the handbrake so that the left and right feet can rest. To start, watch the traffic light, get ready to start when it's close to 2 seconds or 3 seconds, press the clutch, shift to first gear, and slowly lift the clutch.

When reaching the semi-suspension mechanism, the body vibrates. When a traffic light is observed, immediately release the hand brake, start slowly, add some throttle after starting, press the clutch again and shift to second gear. Classify road segments.

If you are not familiar, you should pay special attention to the location and distance of the traffic lights ahead.

When driving, you should pay attention, and you should also pay attention to the road ahead to know the traffic light, now only the green light can take the yellow light, you may also violate some traffic laws.

When we are driving, if the direction of the straight line is red, we have to stop. If it's green when you turn a corner, you can make a turn.

You should pay attention to the road ahead, and you should also concentrate your attention so that you can have a clear understanding, so that you can see the traffic lights clearly and do not smuggle. Observe the situation on the road.

Be cautious to improve your judgment, be sure to determine the direction in advance during the driving process, don't run red lights, be sure to drive safely, stop at red lights, stop at green lights.

At the traffic light intersection, you should drive according to the signal light, the intersection with the right turn signal light, you can turn right when the right turn signal light is green, and if there is no right turn signal light and the intersection can turn right, you can turn right directly at the red light without affecting the passage of other vehicles. The specific right turn is determined according to the situation of the intersection.

According to Article 38 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China, motor vehicle signal lights and non-motor vehicle signal lights are indicated

1. When the green light is on, vehicles are allowed to pass, but the turning vehicles shall not obstruct the passage of the straight-going vehicles and pedestrians that are released;

2. When the yellow light is on, vehicles that have crossed the stop line can continue to pass;

3. When the red light is on, vehicles are prohibited from passing.

At intersections where non-motor vehicle signal lights and pedestrian crossing signal lights are not installed, non-motor vehicles and pedestrians shall pass according to the indication of motor vehicle signal lights. When the red light is on, vehicles turning right can pass without obstructing the passage of vehicles and pedestrians who have been released.

In fact, there is no skill, that is, to remember that whenever you pass through the intersection, you must slow down and slow down appropriately, to prevent someone from running a red light and other bad behaviors that lead to accidents, if it is through the intersection at night, it is best to flash the lights to remind your car that the car is passing through the intersection, which can reduce the accident rate by more than 50%, these experiences are summarized by old drivers for many years of driving, as long as you pay attention to the changes in the road conditions, prepare in advance, you can ensure safe driving.

Novice driving to see the traffic light, the skill is to look at the traffic light in the body when the distance is about 50m, if it is a green light and there are more than ten seconds to pass, if only a few seconds, it is best to stop slowly.

The skill of a novice driving to see the traffic light pass is the current traffic light, which has time, so just look at the time, as long as it is at the green light, the time is relatively long. So you can drive slowly through the intersection.

Now most of the traffic lights have a number of seconds, you can make a prediction according to your speed, as well as the actual road conditions, it is best not to rush the light, when there are still 3-5 seconds to turn the light red, you need to slow down and stop, wait for the green light to light up before passing.

If there is a large bus or bus in front of you and you can't see the traffic light, you can refer to the pedestrian traffic light next to you.

There are no special skills, resolutely do not rush the second, do not have a fluke mentality, and safe driving is the most important thing.

1.When stopping at a red light, it should be noted that if the car is the first car, it is recommended that the distance from the stop line be appropriately larger.

2.If there are many people waiting in line in front of you, the distance from the car in front should be as large as possible, so as to ensure safety.

3.When parking and waiting for a red light, you must remember to pull the handbrake up, many old drivers do not pull the handbrake, which is actually very dangerous. Security issues.

4.Also, when waiting for the red light, be sure to take off the gear, don't hang in 1st gear all the time, and don't keep stepping on the clutch with your left foot, so that your feet will be very.

1.When encountering a traffic light intersection, you must slow down in advance: when you encounter a traffic light, whether it is a green light or a red light, you must lightly step on the brakes and reduce the speed and downshift in advance. When you see a traffic light intersection in front of you, slow down in advance and put it.

2.Choose the right lane in advance: Choose the right lane in advance according to the guiding arrows on the road surface. There are generally left-turn, straight-ahead and right-turn lanes at intersections, so choose the corresponding lane in advance according to the destination you want to go.

3.Speed control: At a distance of about 50 to 100 meters from the stop line or the vehicle parked in front, press the clutch and use the brake to control the speed of the car.

4.Slow stop at a red light: Stop slowly depending on the distance from the stop line or the vehicle parked in front of you. If you feel like the car is about to stop when you find that it is still far away, you can gently release the brakes a little more.

How to operate the vehicle while driving and waiting for the traffic light:

1. When the traffic light is approaching, release the throttle to let the car move slowly, and if necessary, you can brake to reduce the speed. (Remember, you can't slide without gear, and when you are close to the traffic light, press the clutch first, then the brake, so that the ignition does not turn off.)

2. When waiting for the traffic light, if the time difference is less than 20 seconds, you can step on the clutch with your left foot and brake with your right foot; If the time is more than 20 seconds, put neutral gear and pull the handbrake.

This allows the left and right feet to rest.

3. Look at the traffic light, do a good job of starting when it is close to the second, step on the clutch, hang a gear, slowly lift the clutch, and semi-linkage.

, the body trembles, when the traffic light is completed, immediately release the handbrake, start slowly, add a little throttle after the start is completed, step on the clutch again, hang the second gear, OK.

100 meters in advance to see if there is a right turn red light, there is a bright right turn red light to wait for the green light to go away, if there is no special right turn light can pass slowly, right turn has a dead end to slow down the speed, in case of reverse driving electric vehicles.

I won't look at it, and I don't dare to drive and buy it back during the internship period.

Traffic lights are divided into red, green, and yellow.

There are several kinds of red lights at all traffic light intersections, yellow light is on the car that has crossed the stop line can continue to drive under the condition of ensuring safety old-fashioned traffic lights, round, only one light to show red, green and yellow, at this time, green light, you can go left and straight, red light on, left turn and straight car can not drive, regardless of the traffic light right turn can drive. Split traffic light, separate control left turn, straight line, and right turn, this kind of traffic light, the light is not round, is the arrow line type, go your own direction, what color you go in the direction you go, green light go, red light stop, don't look in other directions, you go left and look at the color of the arrow traffic light to the left. This kind of intersection may have a traffic light for a right turn, it may not be, there is no arrow traffic light to the right, and the right turn can be passed at any time, ignoring the signals of other traffic lights, there is an arrow light for a right turn, just look at the color to drive.

To take this kind of intersection, you must first change lanes, go straight and walk in the middle, and keep to the left to stop when you turn left. If you take the wrong road, it is considered a violation, and if you really go the wrong way, you will drive according to the color of the lights in the lane where you park, and turn around in front and come back. At traffic light intersections in big cities, it is illegal to stop at the line.

Traffic lights are divided into old-fashioned and new-style, simply look, old-fashioned is only one round light, no countdown, no prompt to enter the lane of text, when you cross the intersection, or say when you cross the traffic light intersection, you must see the light instructions, according to the current new traffic rules, once the yellow light is on, it is not allowed to pass through, left turn and go straight are green lights to pass, and the new traffic light, before turning left, there will be a text notification to enter the left turn lane, and there will be a text notice to go straight, as for the right turn, You have to see if the traffic light has a clear indication, which means that if there is an obvious right turn red light sign, then you must wait until the right turn green light is on to pass, otherwise no matter what color of the traffic light shows, you can pass directly, don't pay attention, of course, to ensure the safety of pedestrians, I hope it can help you.

You don't understand. How can I help you? Normal intersections. There are trails to turn right. Yes, at all. Don't wait. Not really. Wait.

In a word: the person who drives, the eyes see the six roads, and the ears listen to the eight directions. Turn right without looking at the traffic lights (unless there are arrows to designate), and turn right always be aware of pedestrians on the sidewalk.

Turn right If there is a red light that specifically controls the right turn, it must stop, and if there is no special one, you can generally turn right.

Some friends who have just got their driver's license drive on Zuxin Road, and they tend to be very nervous when crossing the intersection and will not look at the traffic light signal for a while. Today, I will tell novice friends how to look at traffic lights correctly.

1. To see the traffic lights correctly, you must first confirm the lane you are in. You can look at the lane markings, generally the middle straight arrow is the straight lane, the left and right sides are the turning lane, is a curved arrow.

2. After confirming the lane, look at the traffic light indication of the corresponding lane. The straight arrow on the traffic light represents the straight lane signal, if you are in the straight lane, look at the straight arrow, the straight arrow is a green light to pass, the red light must stop, can not cross. In the same way, if you are in a turning lane, just look at the light of the curved arrow, the green light will turn around, and the red light will stop at the intersection.

3. There is no turning lane at some intersections, and there will be no arrow signs on the traffic lights, just one round light, then just look at the color of the lights, the green lights can pass through the intersection, and the red lights are not passable.

4. There is also a situation, before the green light becomes a red light, the yellow light will be lit, and the yellow light will flash for a while, at this time you have to judge in advance, whether you can pass the intersection during the period when the yellow light flashes, if the time is enough to pass, then keep the speed and pass normally, if it is too late, slow down in advance, stop at the intersection and wait for the next green light.

5. Turn right without a right turn light. If there is no special right turn light at the intersection, and we are on the rightmost right turn lane, we can generally turn right directly, regardless of the traffic light ahead, that is only to control the straight line, but pay attention to the courtesy of pedestrians when turning right.

6. When crossing the intersection, sometimes in addition to looking at the signal lights, you also need to look at some warning signs. For example, if we are in the right turn lane, but there is a sign in front of us prohibiting right turns, then no matter what the signal light is, we must not turn right and adjust the lane in advance. The same is true for other prohibitions, which should be observed in advance.