Is the clean base of the Philips shaver any good?

In fact, the main function of the razor is shaving, and under this basic condition, the cleaner is actually of little significance.

First of all, the function of the cleaner is to clean the inside of the razor knife while charging. However, in fact, through actual operation, it was found that there was still a beard ...... in the cleaned head

Secondly, the size of the cleaner is large, and it is not convenient to carry it outside. It is often worn when it is not possible for the user to travel on business. In that case, if you choose the 1050 without a cleaner, can't you clean the razor?

In fact, the 1050 will be more portable and easy to clean and maintain. The most effective and direct way to clean and maintain any Philips razor is to use a brush. Otherwise, why is there a handful in the package?

Finally, in addition to the purchase of a bottle of cleaning solution, you can only go to the after-sales service department to buy it after use. Since it is an original imported model. This kind of cleaning solution is the same as a special, it is also imported, and it is also more expensive.

The most important thing is that you can't buy it all the time, and sometimes you need to order it from abroad, which is more troublesome to say......

As for the effect of this series, don't worry, RQ's razor was originally designed for people with heavier hair. The effect on the lower jaw is quite excellent. So, if you choose 1050, it's still very good.

The use of the automatic cleaning base is still quite large, convenient, clean, and very easy to use.

The cleaning solution is available when purchased.

This series features three independent cutting heads that increase the shaving area by 50%. Depending on your situation, this series works well with it.

Hope it helps.

Summary. The faucet symbol flashes to remind you that you need to clean your shaver. When the shaver is turned off, the shaving head part symbol flashes, which is a reminder to replace the shaving head part.

When the shaving head part symbol, faucet symbol and exclamation mark flash at the same time, it means that the shaving head is blocked. In this case, the motor will not function because the shaving head is too dirty or damaged. If this is the case, the shaving head parts must be cleaned or replaced.

When the travel lock is activated, the lock symbol appears on the display. When the battery is about to run out (with only 5 minutes or less of shaving time left), the charging indicator will flash orange.

If it is always on when charging, it means that it is fully charged, and it may lose power at normal times.

Instructions for the Philips shaver cleaning base indicator.

Hello, your question has been seen in the workplace and is sorting out the answer, please wait a minute.

The faucet symbol flashes to remind you that you need to clean your shaver. When the shaver is turned off, the shaving head part symbol flashes, which is a reminder to replace the shaving head part. When the shaving head part symbol, faucet symbol and exclamation mark flash at the same time, it means that the shaving head is blocked.

In this case, the motor will not function because the shaving head is too dirty or damaged. If this is the case, the shaving head parts must be cleaned or replaced. When the travel lock is activated, the lock symbol appears on the display.

When the battery is about to run out (with only 5 minutes or less of shaving time left), the charging indicator will flash orange. If it is always on when charging, it means that it is fully charged, and it may lose power at normal times.

Didn't get it. Can you provide a pattern of symbols?

What symbols. Base indicator symbol.

1) 。The Jet Clean cleaning system (2) is then taken out from the wash bin and left behind. Pour out the remaining detergent from the cleaning bin.

All you need to do is pour the detergent into the sink. Rinse the wash bin under the tap. Note:

The washing bin should not be dishwasher cleaned. (3) Inject HQ200 detergent into the cleaning chamber, and the injection amount should be between the two lines. (4) Reseat the Jet Clean system on the wash bin.

Make sure to release the key card back into place. Rinse the shaving head parts under the hot water tap for a moment. Place the shaver (without protective cover) on the stand.

5) Press the Down button to select the cleaning program. Press the on/off button on the Jet Clean system to start the cleaning program. (6) The shaver display stops showing the charging indication.

The wash indicator light starts flashing and the shaver will automatically drop into the detergent. The cleaning indicator light flashes continuously throughout the cleaning procedure, which takes a few minutes.

Philips shavers do not need to be washed every time they are used, they can be washed every 2-3 times, the principle is to keep the shaver head clean and not allow bacteria and mites to breed on the head.

After washing, it has no effect on the life of the cutter head, and it will not make the cutter head dull due to rust due to washing, and now the cutter head is stainless steel, which will not rust, but will leave water stains and increase wear.

After using it for a period of time, it is best not to use detergent when you want to clean thoroughly, the design of the cutter head can only be cleaned with water, if you are worried about the cleanliness is not enough, you can wash it for a longer time.

Philips Wash Shaver Washing means that the whole body can be washed with water, but the main thing is to wash the knife head, and the body is not dirty.

The washing technology is to wrap the circuit part and the battery part with a waterproof and breathable film to prevent the intrusion of water. A full-body washable razor is cleaner and can be thoroughly cleaned with water to eliminate bacteria and mites that grow on the shaver.

Hello dear and happy to answer your <>

Kiss the Philips shaver cleaning baseGenerally, the use of the cleaning base is to press the release button of the cleaning bin, and then lift the high-efficiency cleaning system from the cleaning bin to leave the cleaning bin, and then pour the cleaning liquid into the cleaning bin. (If you use it for the first time, fill the cleaning chamber with cleaning solution first) without adding water. Then plug the cleaning bin back into the original cleaner, connect it to the line and plug it in, put the shaver upside down into the cleaner and then buckle it up [skiing] I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again.

Wishing you well; Happy life, everything goes well [warm] [warm].

Summary. Hello pro The use of the general cleaning base should first press the release button of the cleaning bin, and then lift the high-efficiency cleaning system from the cleaning bin to leave the cleaning bin, and then pour the cleaning liquid into the cleaning bin. (If you use it for the first time, fill the cleaning chamber with cleaning solution first) without adding water.

Then plug the cleaning bin back into the original cleaner, connect the wire and plug in the power supply, put the shaver upside down into the cleaner and buckle it on.

The use of the general cleaning base is to first press the release button of the cleaning bin, and then lift the high-efficiency cleaning system from the cleaning bin to leave the cleaning bin, and then pour the cleaning liquid into the cleaning bin cover. (If you use it for the first time, fill the cleaning chamber with cleaning solution first) without adding water. Then plug the cleaning bin back into the original cleaner, connect it to the line and plug it in, put the shaving knife upside down into the cleaner and buckle it up.

Hello pro high-performance cleaning system, and press the release button on both sides of the jet clean high-efficiency cleaning system; (1) 。The Jet Clean cleaning system (2) is then taken out from the wash bin and left behind. Pour out the remaining detergent from the cleaning bin.

All you need to do is pour the detergent into the sink. Rinse the wash bin under the tap. Note:

The washing bin should not be dishwasher cleaned. (3) Inject HQ200 detergent into the cleaning chamber, and the injection amount should be between the two lines. (4) Reseat the Jet Clean system on the wash bin.

Make sure to release the key card back into place. Rinse the shaving head parts under the hot water tap for a moment. Place the shaver (without protective cover) on the stand.

5) Press the Down button to select the cleaning program. Press the on/off button on the Jet Clean system to start the cleaning program. (6) The shaver display stops showing the charging indication.

The wash indicator light starts flashing and the shaver will automatically drop into the detergent. The cleaning finger light flashes continuously throughout the cleaning procedure, which takes a few minutes.

Hello pro Generally, the use of the cleaning base should first press the release button of the cleaning bin, and then lift the high-efficiency cleaning system from the cleaning bin to leave the cleaning bin, and then pour the cleaning liquid into the cleaning bin. (If you use it for the first time, fill the cleaning chamber with cleaning solution first), and do not need to add water. Then plug the cleaning bin back into the original cleaner, connect the line and plug in the power supply, put the shaver upside down into the cleaner and then buckle it upside down.

If you don't understand, take a look at the illustration in the manual. Detergent This Philips product accessory replacement can be booked through customer service**, or ask for the address of the offline repair station for Philips' professional after-sales replacement.

Summary. Dear dear, it's a pleasure to answer your <>

How to use the Philips shaver cleaning base, 1The cleaning base is powered on first, and after the power is turned on, the inside will be automatically lifted. <>

2.Pour the matching cleaning liquid into the chassis, if the amount is not enough, the left side of the machine will be prompted, pour to the scale mark, and the cleaning base will start to work. <>

3.The base will be upgraded and cleaned several times, and the cleaning light (white SE) in the middle will be on for about 10 minutes. <>

4.Drying function: Some cleaning bases do not have this function. <>

In general, the use of the cleaning base should first press the release button of the cleaning bin, then lift the high-efficiency cleaning system from the cleaning bin to leave the cleaning bin, and then pour the cleaning liquid into the cleaning bin. <>

How to use the Philips shaver cleaning base.

Dear dear, it's a pleasure to answer your <>

How to use the Philips shaver cleaning base, 1The cleaning base is powered on first, and after the power is turned on, the inside will be automatically lifted. <>

2.Pour the matching cleaning liquid into the chassis, if the amount is not enough, the left side of the machine will be prompted, pour to the scale mark, and the cleaning base will start to work. <>

3.The base type manuscript filial piety will be upgraded and cleaned several times, and the cleaning light (white se) in the middle will be on during work, about 10 minutes. <>

4.Drying function: Part of the cleaning base does not have this function. <>

In general, the use of the cleaning base should first press the release button of the cleaning bin, then lift the high-efficiency cleaning system from the cleaning bin to leave the cleaning bin, and then pour the cleaning liquid into the cleaning bin. <>

Do you need to press a button to select.

Kiss <>

How to use the Philips shaver, 1. Press the switch and press the shaver, and the display button of the shaver will light up for a few seconds. 2. After the shaver is started, make a roundabout movement of the head of the shaving * on the **. 3. After the shaving is completed, press the switch button to turn off the power of shaving*, and the display will light up for a few seconds to show the remaining power.

The first step is to press the bin release button.

I mean, do you need a button to select the base cleaning shaver?

You can take a look at the usage method I sent you above to operate.

Press the down button to select the cleaning program.