Philips RQ1095 charging problems

Updated on number 2024-05-26
15 answers
  1. Anonymous users2024-02-11

    The charging time of RQ1095 is about 1 hour. In order to better extend the life of the battery, try to recharge it when the battery is depleted. RQ1095 has a low battery display, which is relatively easy to operate without affecting your shaving.

    If you still have power for a newly bought razor, you should run it up and recharge it, and the first few times, the charging time needs to be longer, more than 1 hour, about 4 hours. After a few operations like this, the battery will basically reach a stable state, and it will be charged for 1 hour in the future. Don't recharge every time you run out.

    The official description says that when fully charged, the RQ1095 can shave for up to 65 minutes, not that it must be used for 65 minutes, and the longer the battery is used, it is normal to wear out.

    Moreover, the actual shaving time is calculated based on the individual's usage at the time. If you have a thick beard and the shaver requires a lot of power, the shaving time will not reach the normal 65 minutes.

    RQ1095 has a fast charging function, so you don't have to worry about running out of power and not being able to shave in time.

    Hope it helps.

  2. Anonymous users2024-02-10

    I don't think this kind of problem should occur after 2-3 months of use. It may be caused by not paying attention to activating the battery when you start using it.

    Philips' electric razor, if it is a one-hour charging model, should be charged for another three hours after the full charge prompt at the first charge, bringing the total charging time to 4 hours, before the built-in battery can be fully activated. In future use, it is best to use the weak current prompt before charging, not charging after every shave.

    At present, the built-in batteries of philips razor knives are all nickel-cadmium and there is no so-called lithium battery, so we must pay attention to the charging method in use, so that we can maintain the razor and prolong the service life of the razor.

    Supplement: The 1095 comes with a dedicated clean charger and a travel charging unit. And you don't have to clean it after every use, so you can just use a travel charger or an in-line charger.

  3. Anonymous users2024-02-09

    Summary. <>

    Hello, dear, I'm glad to have your question, Philips RQ1195 has not been charged for a long time without charging, charging has not responded, to help you find out, due to a long time of not charging, resulting in damage to the rechargeable battery, in this case, we only need to replace the same battery, it can be used normally. In this case, it is recommended to go to the after-sales repair point for repair, I hope mine can help you. Wishing you good health and a happy mood!

    Philips RQ1195 has not been used for a long time, no charging, no response.

    Hello, dear, I'm glad to have your question, Philips RQ1195 has not been charged for a long time without charging and no response, help you find out, Qi pants high due to a long time not charged pure cherry power, resulting in damage to the rechargeable battery, in this case, we only need to quietly replace the same battery, it can be used normally. In this case, it is recommended to go to the after-sales repair point for repair, I hope mine can help you. Wishing you good health and a happy mood!

    Pro, analysis of the causes of similar charging problems: 1. The battery is damaged. 2. System failure.

    3. Charger reasons or poor contact. 2. Solution: 1. Try to change to other chargers or data cables, or clean the charging port in the gear.

    2. Enter the recovery mode when booting up, select advancsd advanced mode, select wipe battery, and clear the battery judgment traces. 3. Restore the factory settings to see if it is the original cause of the system. 4. If the battery is damaged, it can only be sent for repair and replacement.

  4. Anonymous users2024-02-08

    Hello, Philips shaver is not fully charged. If the new shaver is not charged with dissatisfaction, it is a quality problem, but it is often used for a few years or a long period of time, this situation will occur, this is not a problem with the battery, but the current limiting resistance of the charger step-down rectifier part is caused by deterioration, most of them are the problem of this resistance, people who know electronic circuits and can read the diagram can find this component, follow the wiring of 220V electricity on the circuit board and find a current-limiting resistor, which is slightly larger than other resistors, The resistance value of this resistor is about 68, its function is to limit the current, the voltage after its current limiting is then reduced by the capacitor and the current is limited, and finally rectified by the diode, the rectified voltage is charged to the battery or full voltage for the shaver motor. It has been used under the impact of high-voltage current, easy to cause heating and deterioration, the resistance value of the change increases, sometimes increases to a few trillion ohms, such a large resistance, can be regarded as an open circuit or open circuit state, sometimes up to several thousand ohms of resistance value, the current limit is enhanced, the current flowing through it is very small, most of the current is blocked by it, so the current after its current limit is rectified through the diode, to charge the battery is very small, will cause the charge can not be charged or not charged enough situation, most Philips shavers can not be charged, It's all a problem with this resistance, you can change a resistance within 100, the power is 1 2W, because it is a heating element, so the power should be larger.

  5. Anonymous users2024-02-07

    Summary. Dear, your question has been received, glad to serve you. I'm sorting out the answers for you, but it will take a little time to type, so please wait a moment and don't finish the consultation so that I can better answer for you.

    Dear, your question has been received, glad to serve you. I'm sorting out the answer for you, but it takes a little time to type the nuclear imitation, please wait a minute, please don't consult with the royal bundle, and I'll answer for you better with Zhen's limbs.

    100 to 240V

    Pro, in 100 to 240V directly will be automatically selected.

    Hello, how many volts is the output voltage.

    Thank you. Pro, the output voltage is 3V

    Pro, different batteries have different output voltages, you can see the code on the battery inside.

  6. Anonymous users2024-02-06

    This scenario is somewhat possible in both cases:

    If it is a battery, there is Kenneng is in the first rush, although it is full 60, but I don't know if it is charged for more than 4 hours, the first charge should be charged for a longer time, which is convenient for the battery memory storage, and the first few times are only charged for 1 hour, then the storage capacity of the battery may not be able to be fully charged.

    The other is that the display is incorrect, and the detailed advice is best to go to Philips after-sales service to see if it will be better.

  7. Anonymous users2024-02-05

    For some waterproof shavers, it is not recommended that you remove them yourself. The shaver screws are hexagon. If it's broken, you still have to find after-sales service to help you get it, although the accessories are more expensive, but rest assured.

  8. Anonymous users2024-02-04

    This value is calculated according to your usual shaving habits, wet shaving, dry shaving, foam and the like, the approximate usable time, the starting value is 60, and the value is different according to your habits, half of them are more than 50, and some of them are more than 40 if they are wet shaving.

  9. Anonymous users2024-02-03

    Good housing prices, international chemical technology and Hakka are good.

  10. Anonymous users2024-02-02

    I recommend Braun razors, the quality is not good.

  11. Anonymous users2024-02-01

    In the RQ1260, when the battery is about to run out (only 5 minutes or less of shaving time left), the charging indicator at the bottom will flash orange. When the shaver is charging, the first charging indicator at the bottom will flash first, then the second charging indicator, and so on until the shaver is fully charged. When the battery is fully charged, all charging indicators will continue to light up.

    After about 30 minutes, the display will automatically turn off again.

  12. Anonymous users2024-01-31

    The Philips shaver RQ1260 is charged as follows:

    Plug the power adapter into the shaver's charging port, check if it is tight, then turn it on and see if the shaver's indicator is normal.

    The indicator light shows the potato digging and answering as follows:

    When the shaver is charging, the first charging indicator at the bottom will flash first, then the second charging indicator will flash, and so on until the shaver is fully charged. When the battery is fully charged, all charging indicators will stay on. After about 30 minutes, the display will automatically turn off again.

  13. Anonymous users2024-01-30

    In fact, this situation is normal.

    Philips shavers use mostly nickel-cadmium batteries, which have the advantage of long service life and low memory. However, due to the fact that the hq6090 shaver has a 1-hour fast charging function, it does make people question in terms of charging and use.

    Generally speaking, models like the HQ6090, which can be used for both AC and DC, are unlikely to charge when the new phone leaves the factory. However, there are also cases of random inspections, which is a different matter. In the final analysis, whether a razor knife is new or not depends on whether the knife head has been used.

    And the situation that you said will appear full after 5 minutes of charging does exist. However, it is not because of the problem of the product, but because of the relationship between nickel-cadmium batteries; A new battery that has not been used, just like a mobile phone battery, often needs to be recharged for a longer period of time, so that the battery can be used at the highest level in the future. HQ6090 has a 1-hour fast charging function, and it is recommended that the expansion time is about 4 hours.

    In this case, you don't have to worry about the prompt of the light, and after 4 hours, this problem will not appear in the future.

    And even if there is a real problem with the razor, don't worry too much. Generally speaking, as long as you buy it in a shopping mall and hold a valid certificate, you should be able to return it within 7 days if there is a problem.

    If you still have any questions, you can directly give me a key to check the words, I hope it will help you.

  14. Anonymous users2024-01-29

    HQ6090 is a shaver knife that can be quickly charged in time, and this kind of shaver knife generally takes about 4 hours to expand the power for the first time. In addition, as long as it does not exceed 24 hours, it will not cause damage to the battery, but it is best not to know it

    There is one point to note, because HQ6090 has a full power weak chaotic base prompt function. Therefore, when charging for the first time, the light may flash when it is fully charged in about 5 minutes. At this time, don't worry about him, just wait 4 hours before removing the plug.

    Hope it helps.

  15. Anonymous users2024-01-28

    1. Philips RQ1280CC is a wet and dry razor, and the power-on time is generally 60 minutes.

    2. Philips, founded in the Netherlands in 1891, mainly produces products for lighting, home appliances and medical systems. Philips, with 128,100 employees worldwide in 2007, has production bases in 28 countries around the world, sales organizations in 150 countries, and has 80,000 patents. On July 11, 2011, Philips announced the acquisition of Pentium Electric (Shanghai)****, with an amount of about 2.5 billion yuan.

    3. Philips' main products are: mobile phones, tablet computers, lighting appliances, razors, etc.

Related questions
30 answers2024-05-26

1. The sound quality of a *** is not only related to the decoding chip, but also needs to be adjusted in the later analog circuit, which is why some of the same chips are very low, and some are very high. Don't be superstitious about the chip theory, Aivery and P7 believe that many people have heard of it, using the Chinese chip of RK Rockchip, but the sound quality is better than that of many domestic ** machines. In particular, don't be superstitious about Philips chips, you must know that the Philips chips on the market are used in low-end phones, such as Avery and Mickey. >>>More

4 answers2024-05-26

The unit design is essentially the same.