The decoration left the light strip slot without the line, and now I regret it, what should I do?

Is it a wall light trough or a top trough, if it is a wall trough using a track to make a decorative curtain on it First of all, let's take a look at the principle of self-pasting wallpaper, it is very convenient to use, a person can paste it, it is glued behind, remove the lamination and paste it.

It is an adhesive-backed product, and it is very gluable. 2Secondly, we explain in detail how to take off the self-pasting wallpaper, to purchase a hair dryer in the market, the size can be adjusted is the best, and then you also need 1 wallpaper knife, keep it for later use. 3. Let's take a wallpaper knife and draw a small corner at the corner of the wallpaper, and then blow back and forth with a hair dryer along the small corner to adjust the low and medium temperature (not too high).

When there is a temperature on the surface of the paper, slowly remove it along the small corner, and when you get the place where the hair dryer can blow to the seam between the wall and the wallpaper, blow on the surface of the wallpaper first, and then blow on the seam, and then slowly follow. Just follow the order and you'll get faster and faster!

After the decoration, now I regret this pattern, what to do with the four bedrooms, the master bedroom and the small bedroom next door to make a cloakroom, now regret the original decoration will never be satisfied, with a few years and then redecorate the decoration did not install the TV background wall, now regret it, how to remedy.

Now there are finished or semi-finished TV walls, there is no need to construct on site, just like buying furniture, just buy and install it, paste wallpaper is the simplest, you can go to the market to see the turf wallpaper, the effect is good, but it is a little more expensive, the TV wall does not need much of a square TV wall, the effect is also good, you can go to see.

Choose a suitable wallpaper to paste, highlight it, after choosing the wallpaper, the master who lays the wallpaper knows what to do! What to do if you regret the decoration, depending on whether you are looking for a decoration company or a personal company, there is a warranty, you can find them. As long as the decoration is environmentally friendly, nothing else is fooled.

Unless the budget is much more than possible. Then you can only blame yourself for not looking for a professional company, the living room modeling is done, the slot of the light strip is there, the spotlight hole is also laid, the carpenter left a circle of line around the living room in the closed gypsum board, and the zero fire must have both the fire line and the zero line to make the spotlight light up, if there is no fire line, then ask the electrician master to find a way to walk a fire line in, and the problem will be solved.

You'll have to ask a professional to take a look at this, and if you can, put the slot on him with wallpaper.

First of all, let's take a look at the principle of self-pasting wallpaper, it is very convenient to use, and one person can paste it

This depends on the specific situation, and if you don't know it, it is most reliable to find a decoration master.

If there is no live wire, ask the electrician to find a way to walk a live wire into it.

It is OK to use the track to make a decorative curtain for the wall groove, and there may be no way for the wall lamp.

You can fill in the slots of the light strip and paste them with wallpaper, or make some decorations on them.

If there is no live wire, ask the electrician to find a way to go in with a live wire, and the problem will be solved.

Let's first take the wallpaper knife and draw a small corner at the corner of the wallpaper, and then blow back and forth with a hair dryer along the small corner to adjust the low and medium temperature (not too high).

Then blow back and forth with a hair dryer along the small corners of the row, adjusting the low and medium temperatures (not too high).

Summary. Hello! If you don't leave a light strip line, you can also install a light strip.

Hello! If you don't leave a light strip line, you can also install a light strip.

Most of the light strip lines can be hidden and installed in the ceiling, so it doesn't matter if there is no reserved light strip line. If there is no ceiling, then it needs to be re-grooved and embedded. Re-slotting and embedding need to contact a professional to deal with it to avoid touching the wires that were originally embedded in the wall during the slotting process.

The problem is that the tiles have been pasted and how to leave the line.

Mirror lamp. Hello! If the tile has been pasted, there is no way to install it, because it will destroy the tile if you go to open the trunking again.

Another way is not to open the wire duct, directly pull the wire to install, but then the wire will be exposed outside, not beautiful!

Abstract The light strip is installed without a light trough as follows:

In the case of no light trough, first determine its installation size, cut it from the integer place, and cut it from the cut, usually one meter for a unit, in each unit has a fixed cut, find the cut and cut it; secondly, connect its plugs well and check whether the positive and negative poles are installed correctly; Finally, tear off the adhesive tape behind the light strip, fix it and install it flat.

How to install a light strip without a light trough.

The installation of the light strip without the lamp groove is as follows: in the case of no lamp groove, first determine its installation size, cut it from the integer place, and cut it from the cut, usually one meter for a unit, in each unit has a fixed cut, find the cut and cut it; secondly, connect its plugs well and check whether the positive and negative poles are installed correctly; Finally, tear off the adhesive tape behind the light strip, fix it and install it flat.

Hope it can help you, thank you.