How to install the light strip, how to install the light strip Detailed explanation of the installat

The installation method of the strip light is as follows:1. First determine the length of the installation, and then take the integer to intercept.

2. Fixed, because the light strips are installed in the groove of our ceiling, the installation method is very simple. For example, most of our more common LED light strips have self-adhesive tapes on their backs. We can use its self-adhesive tape to stick it directly into the groove.

3. The connection of the light strip. When we use self-adhesive adhesive to stick the light strip into the groove of our ceiling, then we can connect the light strip. If we are worried about the movement of the light strip, then we can take some double-sided tape and fix it.

Finally, press it flat with your hand and fix it. At this time, we need to connect the light strip. Like LED strips, it is generally a circuit structure composed of three LEDs in series or parallel, so we directly disconnect these parts.

If there is a joint in the middle, be sure to take a special soldering method to connect it. However, try to avoid this situation and try to install the entire section of light tape.

The light strip is divided into 220 high-voltage light strips, which need a connector to connect to the power supply, and the low-voltage light strip is 12V, which needs to be driven to connect to the power supply and then fix it.

When installing, it is enough to pay attention to beauty and practicality.

You can install it however you want, and at that time, it was practical and beautiful.

When it comes to light strips, I believe you will not be unfamiliar, light strips are a kind of decorative lamps, which are used in many places, such as stores or parks and other places are installed, as a decorative lamp, light strips not only have the role of lighting, but also can play a role in beautifying decoration, we feel that the city at night is very beautiful by the combination of various lights, a large part of which is created by light strips, so today we will introduce you to some information about the installation of light strips.

Indoor installation:

When LED strip light is used for interior decoration, the installation is very simple because it does not have to withstand wind and rain. Take the LED strip produced by Guanghong Electronics as an example, the back of each LED strip is pasted with self-adhesive 3M double-sided tape, and the sticker on the surface of the 3M double-sided tape can be directly removed during installation, and then the light strip is fixed in the place where it needs to be installed, and it is good to press it flat by hand. As for some places that need to be cornered or are long, what should I do?

Very simply, the LED strip is a circuit structure composed of 3 LEDs in series and parallel, and every 3 LEDs can be cut and used separately.

Outdoor installation:

Outdoor installation will withstand wind and rain, if the 3M glue is fixed, it will cause the 3M adhesive to be reduced for a long time and cause the LED light strip to fall off, so the outdoor installation often adopts the way of card slot fixing, and the place that needs to be cut and connected is the same as the indoor installation, but it needs to be equipped with waterproof glue to consolidate the waterproof effect of the connection point.

Power connection method:

The general voltage of LED strip light is DC 12V, so it needs to be powered by switching power supply, and the size of the power supply is determined according to the power of LED strip light and the connection length. If you don't want each LED strip to be controlled by a power supply, you can buy a switching power supply with relatively large power as the total power supply, and then connect all the LED strip input power supplies in parallel (if the wire size is not enough, it can be extended), and the power supply is unified by the total switching power supply. The advantage of this is that it can be centrally controlled, and the inconvenient place is that the lighting effect and switch control of a single LED strip cannot be realized, and the specific way can be measured by yourself.

Controller Connection:

LED marquee strip and RGB full-color strip light need to use a controller to achieve the effect of change, and the control distance of each controller is different, generally speaking, the control distance of the simple controller is 10 to 15 meters, the control distance of the remote control controller is 15 to 20 meters, and the longest distance can be controlled to 30 meters. If the LED strip has a long connection distance and the controller can't control that long strip, then a power amplifier is needed to tap it.

In the above, we have introduced some information about the light strip for you, we mainly introduce the installation method of the light strip for you in this article, we have introduced a total of four aspects of the light strip installation content, we introduced the steps of indoor and outdoor installation of the light strip in the first and second parts of the article respectively, and then we introduced the method of power connection and the connection of the controller when installing the light strip, you had better read our article before installing the light strip.

1. First of all, determine the length du to be installed under a bai

Then take the integer and truncate zhi

Because this kind of light strip is a unit of dao1 meter, only the back is cut off from the cut, so it will not affect the circuit, if it is cut at will, it will cause a unit not to light up.

For example, if you need a meter length, the light strip needs to be cut by 8 meters.

2. Link plug.

The LED itself is a diode, DC driven, so there is a positive and negative pole, if the positive and negative poles are reversed, it is in an insulated state, and the light strip is not lit.

If the connecting plug does not light up when the power is on, you only need to disassemble the other end of the connecting light strip.

3. The placement of the light strip.

The light strip is packaged in a tray, and the newly disassembled light strip will be twisted and difficult to install.

Since the light strip is single-sided light-emitting, if it is placed unevenly, there will be uneven light and dark.

Be careful around corners, in particular.

4. Now there is a special clip on the market for the installation of the light strip of the light trough, called the light strip mate, which will greatly improve the installation speed and effect after use, and it is more convenient to use this if the situation allows;

5. The effect of using a special light strip clip.

Different light strip installation methods are different, there are direct paste, there are card slot installation, etc.

Usually the back of the light hail belt is pasted with self-adhesive 3m double-sided tape, when installing, the sticker on the surface of the 3m double-sided tape is directly torn off, and then the light strip is fixed in the installation position, and it is good to stick it tightly with your hands. As for some places, there is a need to bend or the length of the light strip is inconsistent. LED strip light is a series and parallel connection of three LEDs as a group of circuit structure, every 3 LEDs can be cut, long can be cut off, short can be welded.

The role of lamps in our home is not only lighting, but also very decorative. When we choose lamps and lanterns, in order to make the interior more beautiful, we will choose lamps to decorate. After we choose, we will consider how to install the light strip, so do you know what you need to pay attention to when installing?

What are the installation methods and installation precautions?

1. Indoor installation: When LED strip light is used for interior decoration, the installation is very simple because it does not have to withstand wind and rain. Take the LED strip produced by Guanghong Electronics as an example, the back of each LED strip is pasted with self-adhesive 3M double-sided tape, and the sticker on the surface of the 3M double-sided tape can be directly removed during installation.

2. Power connection method: The general voltage of LED strip light is DC 12V, so it needs to use switching power supply for power supply, and the size of the power supply is determined according to the power and connection length of the LED strip. If you don't want each LED strip to be controlled by a power supply, you can buy a switching power supply with a large power supply as the total power supply, and then connect all the LED strip input power supplies in parallel (if the wire size is not enough, it can be extended), and the power supply is unified by the total switching power supply.

3. Controller connection mode: LED marquee light strip and RGB full-color light strip need to use the controller to achieve the change effect, and the control distance of each controller is not the same, generally speaking, the control distance of the simple controller is 10 to 15 meters, the control distance of the remote control controller is 15 to 20 meters, and the longest distance can be controlled to 30 meters.

4. Pay attention to the connection distance of the LED strip: Generally speaking, the maximum connection distance of the 3528 series LED strip is 20 meters, and the maximum connection distance of the 5050 series LED strip is 15 meters. If the connection distance is exceeded, the LED strip is easy to heat, and the life of the LED strip will be affected during use.

Precautions for light strip installation.

1. When the whole roll of LED light strips is not unpacked or piled up, do not turn on the LED light strips to light up;

2. When the LED light strip needs to be cut according to the on-site installation length, the light strip can only be cut at the place where the scissors mark is printed, otherwise it will cause one of the units to not light up, and the length of each unit is generally meters;

3. When connecting the power supply or two sections of the light strip in series, first bend the head of the colorful lamp to the left and right, so that the wire in the light strip is exposed about 2-3mm, cut it clean with scissors, leave no burrs, and then connect it with a male pair to avoid short circuit;

4. Only LED colorful light strips with the same specifications and voltage can be connected in series with each other, and the total length of the series connection shall not exceed the maximum allowable length;

5. When the LED strips are connected in series, each section is connected, that is, the pilot is lit up for a section, so as to find out whether the positive and negative poles are connected in time and whether the light direction of each section of the strip is consistent;

When we install the light strip, we need to pay attention to a lot of details, and learning to install is also very important. The above is how to install the light strip and the installation precautions introduced to you today, and this is the end of it.