-
You can contact professionals to solve it, such as REGEM MARR, as a professional industrial camera company, one of the top 500 Chinese enterprises, has been committed to technological innovation to lead the development of the industry, with more than 1100 authorized patents, more than 1300 non-patented core technologies.
The industrial camera process is complex, and you must choose a company with good after-sales service when purchasing, so that problems can be solved in time. REGEM MARR branches are located all over the country, and each branch is equipped with a number of on-site experts to respond quickly, provide high-quality professional services, and respond to customer needs within 24 hours. Call 4000-697-797 service anytime and anywhere**, you can get product introduction, purchase consultation, after-sales processing and other manual services, and any questions you have feedback will be answered professionally and intimately.
Through the official WeChat platform, WeChat***: regemmarr (regem marr EVOC gold code), you can grasp the company's latest developments and various industry information for the first time, and you can also interact in real time. At the same time, you can apply for repair, inquire about outlets, warranty period, etc., and quickly obtain professional services.
-
Install LabVIEW's Vision Kit and there are examples of measuring dimensions straight away.
-
What brand of industrial camera do you use, and what excuse do you use 1394 or Ethernet? I can help you If you use C++, you can think that the manufacturer wants a camera secondary development kit, and then call the OpenCV image processing algorithm library to do it yourself, of course, the development speed is very fast if you use Labview to process the image, hehe.
-
If you can read it directly from NI Max, you can use the visual assistant shown in the figure below to call it up.
-
LabVIEW is a software from NI in the United States, which is widely used.
-
There wasn't a decent answer. Let me answer, after all, some novices are new to contact and don't know where to start.
First of all, the driver of the Basler ACE should be installed, and after installation, try to start it with the Basler software (usually the Pylon Viewer) to see if the image can be captured. If there is no image, the IP may be due to a problem with the IP settings, you can use the PYLON IP Configurator to change the camera IP or change the IP of the PC NIC to make the IP of both ends in the same IP segment.
Once the images have been captured by Basler's own software, you can use the NI Max software to see if the camera can be used properly. Note: Other hardware, including other brands of cameras, is generally the same step, and NI Max can use the hardware normally before talking about using LabView for programming interaction.
The normal hardware interface will be in My System - > Devices and Interfaces - > network (if it is an Ethernet camera). If there is no problem with the previous steps, the images can be captured here.
Other issues such as the giant frame on the network card driver, the bandwidth control when multi-camera, and the firewall are turned off will not be repeated here.
There is also a "Acquisition and Programming Control Method for ACE Camera under LabVIEW" in the library
-
You go to Hikvision's technical support and ask them to give you the SDK package for the camera, which contains the ActiveX controls (OCX controls), which can be found in the container on the front panel of Labivew. If you want to do in-depth development, please use the dynamic link library, write it yourself according to Hikvision's documentation, and like the general Altai or Advantech boards, the bottom layer is the dynamic link library.
-
To call DLLs, you do not need to connect to the IMAQDX or IMAQ handles in LabVIEW. Just use the dynamic link that calls the dll. Call dll, use error links if you want order, and single calls can be sequential if you don't need order.
In general, you can refer to the instructions for use, and for details, you can consult Regem Marr and obtain relevant technical documents, tools, drivers and FAQ libraries through the official **(, you can ** to enjoy professional official services immediately. You can also directly initiate a conversation application through the ** communication tool, or submit a message, and our customer service staff will get in touch with you as soon as possible. >>>More
The back focal length of an industrial camera, also known as the back focal length, refers to the fact that when a standard lens (standard C CS mount lens) is attached, the image of the subject can be exactly on the target surface of the CCD image sensor. Generally, when industrial cameras leave the factory, the back focal length has been appropriately adjusted, so there is generally no need to adjust the back focus of industrial cameras in applications where prime lenses are attached. >>>More
Line scan industrial cameras, as the name suggests, are in the shape of a "line" imaging sensor. Although it is also a two-dimensional image, it is extremely wide, a width of several thousand pixels, and the height is only a few pixels. This camera is generally used in two situations: >>>More
51camera's Ann series large-format industrial cameras are very cost-effective, you can check them out.
It is good to choose REGEM MARR Yanxiang gold code, an old brand, with a good reputation, cost-effective, and not expensive. Through the official WeChat platform (WeChat***: regemmarr regem marr EVOC gold code), you can grasp the company's latest developments and various industry information at the first time, and you can also interact in real time. >>>More