Understand the red flag linux5 0 XP dual system into

Linux and Windows boot differently.

To put it simply, Windows is bootstrapped by something called NTDL.

Grub, on the other hand, is a general-purpose bootloader.

You can select the system you want to boot.

Grub has a higher priority than NTDL.

That is to say, if you can't find the boot list after the hard disk is powered on, it will output a bunch of English before handing over control to NTDL, and then the grub prompt appears, because you deleted the default boot partition (linux), and grub can't find the partition to boot, so it prompts an error.

After that, you reinstall the Windows installation disk and destroy the boot area, so you can't find the hard drive.

Now that you've installed Windows, put an installation disk in it, and follow the prompts to enter"Windows Recovery Console"is a DOS-like interface.

Type fixmbr and start again when you're done.

Correct steps to remove linux.

Many of my friends installed Linux, but they soon found that they were not used to the Linux system. So I wanted to delete it, but I stumped some friends. Here's a solution for friends.

The following is based on two systems: one WindowsXP and one Linux. Bootstrap with grub. (The same goes for win2k).

The first step is to boot the machine with a boot disk with dos commands and run the fdisk mbr command. This command is to override the primary boot partition.

The second step is to restart the machine, here your grub should be gone, and the next step is to delete the partition where Linux is located. In Disk Management in Windows, you can delete the Linux partition.

Partition table corruption is likely to be this problem Go to the DOS toolbox There is a partition table repair tool You try the name I forgot fixdisk It seems to be forgotten You look for it.

You should uninstall grub first, reinstall Hongqi, and uninstall grub

I tried what you said, and it still didn't work, and I ended up using the DM partition to rebuild the partition and walking away with the normal system installation disk, and it took a lot of work.

It's good to fix it with the system disk.

Keep the original win7 unchanged, and install linux directly in the new partition you divided.

If Win7 is going to be reinstalled at the same time, then be sure to install Windows first, and then Linux

Win7's built-in partition software may not be able to do lossless partitioning, it is recommended to use a domestic free software with a history of more than 10 years diskgen for partitioning, which is very easy to use.

After partitioning the 20G space, use the Hongqi Linux CD to boot the installation, and divide the 20G into at least one swap area and one partition.

Use, I don't understand hi me, happy cooperation!

There are the following matters to note the main attention of the building:

1. Partitioning issues. The landlord can use magic partitions, etc., to divide no less than two ext3 partitions into an existing partition. Of course, it is possible to repartition the entire disk, but the data will not be saved.

2. The problem of burning is recommended that the landlord do not engrave it. I used to do the same, but after engraving, due to the density of the disc and the problem of data, it seems that the burning was successful, but it was incomplete. Now there is a way to install linux under the hard disk.

At the same time, the update of the system disk is also fast, and it is not recommended that the landlord engrave the disk.

3. Install Linux, it is not recommended to install the Hongqi desktop version (I also used it, and I deleted it in a few days). Such as ubuntu is good. There are too many online tutorials. If you search for yourself, you will grow knowledge.

You might as well install a redhat, or fedora, ubuntu, etc., which are better than red flags.

Ubuntu is good.

Find a Ubuntu CD, the installation by the optical drive is very smooth, you don't have to get it yourself.

I've heard of the red flag thing, but I haven't used it, and the response is very poor.

If you really want to get started with Linux, I still recommend Redhat's Fedora, and the current version is 13

And then there's the very good CentOS.

Categories: Computer Network >> Operating System Failures.

Problem description: I don't know much about computers, especially operating systems other than Windows and DOS, almost none of them are involved. Recently, I checked the information of Hongqi, and I had an urge to install Linux to try. But I don't want to install it with a web host.,So there are a lot of concerns that may seem low-level to everyone.,I hope you know linux friends to answer:

1) When installing the CD, does Linux have an installation prompt interface like a general win installation disk?

2) What exactly does the phrase "Linux and Windows have different partition formats" mean? If I am in a C drive (WIN system), D drive (application software), E drive (file archive), F drive (system backup), G drive (free, about 15G) in FAT32 format in the WinXP environment, can I install the red flag on the G drive? What should I do?

3) If the installation is successful, and successfully enter the system selection interface provided by Linux, if I enter Linux, then the information stored on the original C drive to F disk is visible and operational? Similarly, if it's a file I'm done under linux, is it visible under windows? If it is not (without considering the mounting software), then does it mean that it is like operating on two computers, each of which belongs to each other, not visible to each other, and does not interfere with each other?

4) What should I do if I want to uninstall Linux and restore my computer to its previous state (G drive is free)?

Thank you! Analysis:

The answer is as follows: 1): Yes, the installation disk will prompt the character interface installation or the graphical interface installation (default);

2):Linux partition situation: linuxeden doc 24146;linuxeden/doc/21579

You can put it in a G drive and use it.

3) Enjoy resources in Linux and Windows: By using the mount command, we can easily consult and use Windows files in Linux.

But Windows is not as friendly as Linux, and there is no tool to communicate with Linux, there is a gadget on the network called LinuxDOS, less than 500K, running under Windows, dedicated to viewing Linux files. Once it's running, you can select the drive, and then it lists Linux's file systems just like Explorer.

Find the rest here: LinuxDIYF