About the 1394 capture card is not possible to be screened

It's not impossible to attribute your problem to device and connectivity issues.

Because your 1394 end card, cables, DV devices, and computers, all factors are very complicated, and any small factor can cause the device to be unusable. It is recommended that you double-check the individual parts. If the 1394 end card, cable, and DV device work together on other computers, then there must be a problem with your computer.

Even if the PCI slot can use a network card, it may not be able to use a 1394 capture card. If you look closely, you will find that the contacts of the general network card interface are much shorter than the slots. You should plug in your capture card and boot up the computer, go to the BIOS and set up the PCI settings.

If you don't know how to set it up, you can load BIOS defualt settings.

Confirm the above operations, enter the system at this time, generally identify the hardware, and install the manufacturer's drivers. Then install an app, such as VideoStudio. Connect the DV device, test it and you're ready to go.

Definitely the driver is not installed or installed incorrectly, the capture card is installed, and there is also software, if this software is not supported by the system or your configuration is low, it will not work.

Since your system manager recognizes the hardware, let it automatically install the driver, if you want to restart, restart it, install the acquisition software, such as painting, sound and shadow, etc., and open the software collection.

Change the location of the slot and install the driver that comes with the capture card, which can generally solve the problem.

Uninstall the capture card in Hardware Management and reinstall it.

It should be a problem with the operating system, and installing a new version of the computer market Ghost XP installation will solve the problem.

You have some problems with your system, if the disc won't boot.

In it, enter the daily bt to find the XP disk and install the same effect directly on the hard disk.

If you install XP, SATA should work in PATA-compatible mode.

Summary. I've used a 1394 capture card and nothing has happened to me. The 1394 capture card itself is relatively stable, but it can also be bad.

Generally speaking, the 1394 capture card will fail due to long-term use, or it will fail due to unstable power supply. Therefore, when using the 1394 capture card, you should pay attention to keeping the power supply stable, and check the status of the 1394 capture card regularly to ensure the normal use of the 1394 capture card.

I've used a 1394 capture card, but I've never had a bad look. The 1394 capture card itself is relatively stable, but it can also be bad. Generally speaking, the 1394 capture card will fail due to long-term use, quietly or due to the instability of the electric spring source.

Therefore, when using the 1394 capture card, you should pay attention to keeping the power supply stable, and check the status of the 1394 capture card regularly to ensure the normal use of the 1394 capture card.

Can you add, I don't quite understand it.

Yes, the 1394 capture card may break. In order to avoid this, it is recommended that you check the cables of the 1394 capture card regularly to make sure they are not damaged, and update the drivers regularly to ensure the best performance of the 1394 capture card. In addition, you can also consider using a newer capture card for better performance and higher reliability.