When my computer boots up, it always shows a disk read error occurred press ctrl alt

Failed to find the computer system after booting up. Here's how to fix it:

1.Check hardware damage: PE disk's diskgen that partition software can read the hard disk to check whether it can be read. If you can read it, the hard disk is good. Otherwise it's bad. Change.

2.Check whether the hard disk can be read, first check whether the partition table is correct. Save the changes after changing them to the correct one.

The tray of the feeding system is divided into C disks. Primary hard drive partition. Then turn off diskgen.

Find System Boot Repair in PE. This means the same thing, but the name may be different. Fix the system boot mode of the C drive.

That's it. After repairing, it will be solved by normal boot.

I may not be able to express it well, but I have solved the problem of 7 or 8 machines. The company's network management is depressed. I don't have a good memory.

There is an error on the hard drive and it needs to be fixed.

Check to see if the hard drive cable is plugged in tightly.

Find a keyboard with a round mouth, and in operation, figure out which key is to enter the BIOS, and don't press the wrong one. There are del, f2, f1, tab, and a lot of computers have some strange keys...Hard drive issues, as far as you can't use the boot.

What should I do if a disk read error occurred press ctrl+alt+del to restart?

Hello, dear dear, I am glad to answer the question of a disk read error occurred press ctrl+alt+del to restart: first of all, the meaning of this sentence is "hard disk read error, please press and hold the ctrl+alt+del key to restart". In this case, first restart the computer according to the prompts of the computer, if this problem still occurs, it may be a problem with the hard disk cable, first shut down the computer, then open the chassis, unplug the hard disk cable and plug it in again.

Then start the computer, if it still prompts an error, it may be a system problem, the hard disk has a bad sector, redo the system. Hope mine can help you!

Summary. Consultation Record · On 2022-06-03, a sentence appeared on the computer: A disk read error occurred press ctrl+alt+del to restart.

Hello dear, in order to avoid data loss, it is recommended to back up your data in advance. In the actual working environment, the main reasons for this phenomenon are as follows: (1) Hard disk failure (such as:

Hard disk bad sectors, hard disk circuit faults, etc.) (2), the boot information of the hard disk MBR is incorrect (note: relative to the host, the hard disk does not have any system installed) (3), the boot file or configuration file of the operating system is wrong (4), the current host has multiple hard disks, but the boot sequence is set incorrectly, and the boot disk cannot be effectively identified (5), and there are floppy disks in the current floppy drive.

Hope mine is helpful to you.