Is tap water good for watering flowers, and why can t tap water be used to water flowers?

Tap water contains more soluble minerals such as calcium and magnesium, and is alkaline. Long-term watering with tap water will cause soil acidity and alkalinity imbalance, soil compaction, and poor air permeability, which is not conducive to the growth of plants. At the same time, tap water also contains a small amount of chlorine.

It is also not conducive to the growth and development of flowers. Therefore, it is not possible to water the flowers directly with tap water.

Extended Materials. Tap water refers to the water produced by the tap water treatment plant after purification and disinfection that meets the corresponding standards for people's life and production. Domestic water is mainly drawn from rivers, lakes, groundwater and surface water through the water intake pumping station of the water plant, and the waterworks go through precipitation, disinfection, filtration and other processes in accordance with the "National Sanitary Standards for Drinking Water".

, and finally delivered to individual users through the water distribution pumping station.

Tap water disinfection mostly uses chlorination, the main purpose of public water chlorination is to prevent water-borne diseases, this method has been promoted for more than 100 years, with a relatively complete production technology.

and equipment, chlorine for tap water disinfection has the advantages of good disinfection effect, low cost, and almost no harmful substances. However, after understanding and studying the theoretical data, it is found that the use of chlorine for tap water disinfection still has certain drawbacks. Chlorinated tap water can produce carcinogens, and experts have proposed many improvement measures.

The world's safest method of disinfection of tap water is ozone disinfection.

However, this method is too expensive to dispose of, and the retention time of ozone treated water is limited, and there is no exact idea of how long it can be retained. So there are only a few developed countries.

This method of processing is used.

Watering flowers with tap water for a long time is not good. Tap water is hard water, containing soluble calcium and magnesium and other minerals, alkaline, long-term use of tap water to water flowers will make the soil acidity and alkalinity imbalance, soil compaction, resulting in soil knotting, air permeability and water seepage ability deteriorated, is not conducive to the growth of plants. So stop watering your flowers with tap water!

Try the following:

1.Residual tea watering flowers.

The fermented residual tea is used to water the flowers, which can add nitrogen and other nutrients to the plants.

2.Wash rice and water the flowers.

The nitrogen, phosphorus, potassium and other elements in the fermented rice washing water can make the flowers of the plants larger and more colorful.

3.Beer water for flowers.

Beer is rich in nutrients, and the leaves of the plant will grow longer and wider, and it will be beautiful.

4.Soybean water to water the flowers.

The soybeans or bean dregs at home, after they are ripe, contain nitrogen in them, and the plants will grow rubbing.

5.Spoiled milk watering flowers.

After the milk has spoiled, water is added to water the flowers, which is beneficial to the growth of the flowers.

Snow water the flowers. The nitrogen contained in snow water is a good nutrient for plants.

In fact, tap water is not all the same all over the country, for example, some cities tap water sources are from lake water, and some cities tap water is from groundwater, the north is alkaline, the south is acidic, so it cannot be said that tap water is good or bad, because the situation is different in different places.

We must all know that regardless of the tap water, tap water will generally be disinfected with chlorine, so that tap water will contain a certain amount of chlorine, if it is directly used to water flowers, this is not very good for plants, although the content is very low, even if you use tap water directly to water flowers, flowers will not immediately have any bad reactions, but in the long run, it may have an adverse effect on flowers and plants. If you use tap water to water your flowers, you should take some corresponding measures, such as putting them in a basin for one night before watering (if possible, you can put them for two days), so that the chlorine in them can be dispersed, and the water temperature can also be close to room temperature, so that there will be no problem with watering flowers with tap water.

I believe that many flower friends are more interested in rain, river water, tap water which is the best to water flowers, "Linghai Lanyan" said, rain is the top, mountains and rivers are second, river water is second, and well water is second. But these experiences are not necessarily suitable today, because of environmental pollution, sometimes it is acid rain, river water pollution, may contain more bacteria, etc., so flower friends can not blindly choose, to determine according to the actual situation, if you can not ensure other water sources, or practical tap water is more reliable, because the vast majority of flower friends across the country are using tap water to water flowers.

Regardless of the tap water, tap water is generally disinfected with chlorine, which is not very good for plants, but because the content is very low, so even if some flower friends directly use tap water to water the flowers, the flowers will not immediately have any bad reactions, but in the long run, if the flower friends use tap water to water the flowers, they should be placed in the basin for one night before use (if possible, they can be placed for two days), one to let the chlorine gas in it disperse, and the other is to make the water temperature close to room temperature, so that there will be no problem with watering flowers with tap water.

This also starts with the composition of tap water: tap water is generally disinfected with chlorine, which is not very good for plants, chlorine is toxic and makes the soil salinized is not good for the growth of flowers, but because the content is very low, so some flower friends even if they directly use tap water to water the flowers, the flowers will not immediately have any bad reactions, but in the long run, it is not good for flowers and soil. If you use tap water to water your flowers, you should put them in the basin for one night before using them (if possible, you can put them for two days), so that the toxic substances in them can be dispersed, and secondly, you can also let the water temperature close to room temperature, so that there will be no problem with watering flowers with tap water.

You can add ferrous sulfate solution in tap water, and then water the flowers, and water the flowers with treated tap water, which can not only prevent the alkalizing of the potting soil, but also make the plants grow robust. Another way is to boil the tap water and cool it and then water the flowers, so that the original chloride in the water will volatilize or precipitate, and the alkalinity will be reduced, and it can be used. However, long-term watering with cooled boiling water will cause hypoxia in the soil and affect the growth of plants.

Therefore, while treating and using tap water, we must also pay attention to watering fertilizer water in order to make the plants flourish.

Flowers that prefer acidic soils will gradually become alkaline if they are regularly watered with tap water. Plants will have yellow leaves and slow growth. Therefore, to raise acidic flowers, in addition to keeping the soil acidic, it is also necessary to water the flowers with acidic water.

In this way, the acidity in the soil can be kept stable.

Do not water flowers directly with tap water.

We also said above that the tap water that has just been connected contains chemical components, which will cause some damage to many flowers, although the degree of damage is not very large, but over time, it will always have a bad impact on flowers and plants. At this time, it is best to put the tap water on the balcony and other places and dry it for a day or two, so that the temperature of the tap water can reach room temperature, and it can also make the tap water contain more oxygen, and the chemicals will also volatilize, so it is better to use the tap water for watering the flowers.

Second: water the flowers after mixing the tap water with wine.

Pure tap water can only replenish water to flowers and plants, but we can add something else to add more nutrients to it, more commonly beer, which we often see. We open the beer, wait for the alcohol to evaporate, mix it with the treated tap water, and water the flowers and plants, at this time the rich nutrients contained in the beer will make your flowers and plants grow miraculously.

Third: Mix tap water and vinegar to water the flowers.

We all know that many flowers and plants like acidic soil and need more nutrients, and vinegar itself is acidic, which can acidify the soil and can be used for disinfection and sterilization. Most of the raw materials for vinegar itself are grains or fruits and vegetables, which are extremely rich in plant fiber and nutrients, so it is also a good choice to mix vinegar and water to water flowers.

Because tap water has disinfectants in it, the chloride ions in it can affect the growth of flowers.

Not every flower can't be eaten to sleep, I think some flowers are more delicate and may not be able to use tap water? Going to the tube he may be deep water will affect her coarse velvet and then affect its absorption. But many of the flowers at the corners of the mouth are made with tap water, and you can add 1 nutrient solution or something to decoacher.

Hello, it's not that the tap water can't water the flowers, but the tap water that just came out can't water the flowers directly. Because tap water is disinfected with a variety of bleach, hypochlorous acid is formed with water, which is harmful to flowers.

In order to save water, I hope you can make better use of rice washing water and water your flowers.

In the process of tap water purification, there may be residues containing chlorine-containing substances, which can be harmful to the flowers, ranging from falling leaves and flowers to wilting and dying. Be sure to let the tap water sit in a container for a few days and wait for the chlorine-containing compounds to evaporate on their own before watering the flowers, so that you will be fine.

Hello, the landlord actually thinks that the tap water in our city should be disinfected, and sodium hypochlorite is used. And after disinfection, it will form crushed acid roots in the water, if you water the flowers directly with tap water, it is likely that these hypochlorous acid will damage the rhizomes, so it is best to water the flowers after drying the tap water for a period of time, so as not to acidify the roots of flowers and plants!

Because tap water is precipitated and disinfected through many processes, cleaning also removes a lot of minerals, and a small amount of disinfectant is used, so it is not suitable for watering flowers.

Because of the difference in the source, the purification treatment method is not the same, such water is not suitable for watering orchids or other flowers, it needs to be placed in a large container, such as a clean basin, etc., put on the balcony to dry for a few days, so that the dissolved "tap water in various places because of the difference in the source, the purification treatment method is not the same, such water is directly used to water orchids or other flowers are not suitable, it needs to be placed in a large container, such as a clean basin, etc., put on the balcony to dry for a few days, It is relatively good to let the dissolved "chlorine and chlorine" in it evaporate, let the water "cook" it, and then water the flowers. It is relatively good to evaporate it, let the water "cook" for a while, and then water the flowers.

Because tap water is added with a large number of fungicidal drugs, it can kill the microorganisms in the water, which is not conducive to the nutrition of flowers.

Therefore, it is recommended that even if you use tap water to water the flowers, you should precipitate in the air for a period of time to volatilize the chlorine in it and then use it to water the flowers.

The reason why you can't water your flowers with tap water: Tap water is generally disinfected with chlorine, chlorine is toxic and will salinize the soil, which is not good for the growth of plants and flowers, and the short-term watering is not obvious, but the long-term is not good for flowers and soil. I also use tap water to water my flowers at home, it doesn't matter if I use tap water to water my flowers, you can leave it for a day or two to disperse the toxic substances in the water, and it can also approach the temperature in the house.

If you want to water the flowers, you have to use rice water. It's the best. Tap water can be used if it is properly disposed of.

Tap water contains a certain amount of chlorine, which is used directly to water flowers, which is not very good for plants. But if you leave the tap water for a while and come back to water the flowers later, it's still fine.

Tap water can not be used to water flowers directly, because tap water contains more chlorine, and direct watering for a long time is not conducive to the growth of flowers and plants, and it is easy to have yellow leaves, and even affect flowering.

It is recommended to connect the water in advance and dry it in the sun for two or three days before using it, which is more beneficial to the growth of plants. In addition, the water temperature and soil temperature are closer to the soil temperature after drying, so that the plants can absorb water better and faster.

There is a lot of chlorine in tap water, which must be treated before watering flowers, otherwise it will be harmful to flowers and plants. The treatment method is also very simple, put the tap water into a bucket and put it in the sun for two or three days, so that you can continue to use it. Alternatively, an appropriate amount of ferrous sulfate can be added to the water, so that watering can avoid alkaline flowers in the soil and promote the growth of plants more robustly.

Tap water contains a certain amount of bleaching powder or chloride ions, and if you want to use it to water the flowers directly, you need to expose it to the sun for 2 to 3 days. Add an appropriate amount of vitamin C to tap water and leave it for 6 10 hours, or you can water the flowers directly. In the later stage of maintenance, you can also regularly water the acid-loving flowers with ferrous sulfate solution once to avoid soil alkalization.

How to water flowers directly from tap water.

How to deal with tap water can directly water the flowers.

Flowers and plants grown at home are not suitable for direct watering with tap water. Tap water contains bleaching powder or chloride ions, which can affect the normal growth of flowers and plants. If you want to water flowers and plants with tap water, you need to put tap water in a suitable container, and then put the container in a sunny place, and it can be used after 2 to 3 days of exposure.

How to deal with tap water can directly water the flowers.

When watering with tap water, you can put an appropriate amount of vitamin C in the tap water to remove chloride ions in the tap water. After putting vitamin C in water, put tap water in a well-ventilated environment for 6 to 10 hours. Watering flowers and plants with tap water in the later stage will not hurt the flowers, and it is also conducive to the growth of flowers.

How to deal with tap water can directly water the flowers.

Most of the flowers and plants grown at home are acidic soils, and long-term watering of flowers and plants with tap water will reduce the acidity of the soil. A large amount of iron is lost, the soil is acidic enough, and it is easy to compaction. After soil compaction, the root system of flowers and plants cannot breathe and grow normally, which will affect the growth of flowers and plants.

How to deal with tap water can directly water the flowers.

If the soil is alkalized and the phenomenon of compaction occurs, you can water the flowers and plants with ferrous sulfate solution. Ferrous sulfate solution is a soil conditioner, which can neutralize the soil and regulate the acidity and alkalinity of the soil. During the curing period, in order to avoid soil alkalinization and agglomeration, the acid-loving flowers can be watered with ferrous sulfate solution 1 time between 20 and 30 days.