What are the advantages of plastic horizontal mixer?

The selection of plastic raw materials needs to consider the brand, use level, manufacturer (origin), type, processing level, characteristic level, material and other factors, such as PP, plastic, stainless steel, PVC, etc.; The types include standard materials, sub-brand materials, etc.; The use level includes general grade, food grade, injection molding grade, auto parts, home appliance parts, etc. The ** of plastic raw materials is about ten or twenty yuan per kilogram, the cheap ones are a few yuan, and the expensive ones are dozens of yuan.

Correct maintenance method of plastic horizontal mixer: 1) Turn on the power supply, and wipe the mixing pot and mixing blades with a damp cloth before stirring. (2) Pour the weighed cement and standard sand into the mixing pot.

3) Start the machine, add water slowly after mixing for 5s, and add it within 20s-30s. (4) Stop the machine for 180 5s from starting. (5) Scrape off the glue sand stuck to the blade and remove the mixing pot.

6) After the operation is over, the mixing blades and stirring pot should be cleaned in time.

Hello, I am the main question and answer, and then I will answer for you, the value of the horizontal mixer is: good mixing effect: the mixer inside the horizontal mixer can fully mix the materials, so that the various ingredients are evenly distributed and stuffy, so as to improve the quality of the product.

High production efficiency: Horizontal mixers usually have a large capacity, which is able to mix a large number of materials at one time, saving production time and cost. It's easy to use:

Horizontal mixers usually have a simple structure and an easy-to-operate control system, which makes it easy for operators to master the operation methods.

The values of a horizontal mixer are as follows:

The horizontal cylinder is equipped with a slurry blade with biaxial rotation and reversal, and the slurry blade is at a certain angle to circulate and stir the material along the axial and radial directions, so that the material can be quickly mixed and evenly The performance characteristics of the horizontal mixer The rotation speed of the reducer driving the shaft and the structure of the paddle will weaken the gravity of the material, and with the lack of gravity, the difference in particle size and specific gravity of each material is ignored in the mixing process. The intense mixing motion shortens the time of one mix, making it faster and more efficient.

Even if there is a difference in the specific gravity and particle size of the material, a good mixing effect can be achieved under the rapid and violent churning and throwing of the staggered mixing blades. The mixing uniformity is high, the residue is small, and it is suitable for the mixing of more than two kinds of fertilizers and additive premixes.

Product features of horizontal mixer::

The horizontal mixer makes the material fully mixed, so as to improve the mixing uniformity; The novel rotor structure is adopted, and the minimum clearance between the rotor and the bright body can be adjusted to close to the zero position, which effectively reduces the amount of material residue; It can crush larger materials, the overall structure is more reasonable, the appearance is beautiful, and the operation and maintenance party installs and maintains.

The maintenance of the machine is an extremely important regular work, which should be closely coordinated with the operation and maintenance of the machine, and there should be full-time personnel on duty to check.

Horizontal mixer fertilizer mixer adopts the form of U-shaped semi-cylinder horizontal, the body is all welded by steel plate, sturdy and durable, the interior is a rib paddle structure, the bearing is at both ends of the U-shaped cylinder, and the mixing motor is connected by the reducer, and it is equipped with a feeding elevator. The material is mixed evenly by the reverse spiral belt and the external paddle in the form of stirring and overall movement. Equipped with 2 outlets, adapted to different receiving methods, one end of the discharge port is used for loading big bags, the middle filling machine is designed for the valve pocket, the valve bag is filled with automatic sealing, convenient and fast, saving labor.

The mixing uniformity is high, the residue is small, and it is suitable for the mixing of compound feed, concentrated feed and additive premix.

It is characterized by the fact that the material can be fully mixed. Thus improving the mixing uniformity; The novel rotor structure is adopted, and the small gap between the rotor and the shell can be adjusted to close to zero, which effectively reduces the amount of material residue; The machine is equipped with grease addition pipeline, the overall structure is more reasonable, the appearance is beautiful, and the operation and maintenance are convenient.

It is used in the mixing and mixing of interior and exterior wall putty powder, stucco gypsum, dry powder adhesive, dry mortar, masonry mortar, mortar king, wear-resistant floor and various cellulose and dry powder chemical materials in building materials, chemical and other industries. The whole set of equipment has reasonable design, excellent performance, easy operation, short mixing cycle, high efficiency, tight sealing, low noise, high dust collection efficiency, high safety factor of power system, safe lock of transmission system, and all high-altitude operations are protected by guardrails. It is a well-designed, safe and reliable large-scale horizontal mixing equipment.

At the same time, it has the characteristics of low equipment investment and high production efficiency. Equipped with automatic weighing valve mouth packaging machine, every 4-6 seconds can pack a bag, workers only need to repeat the bag, take the bag two actions, no need to sew the bag twice, greatly improve the production efficiency, reduce the labor cost, is the ideal equipment for packaging powder materials.

Low center of gravity and cost-effective. Gravity is downward, and the inertia formed is difficult to eliminate. The same goes for increased grip. More than half of the kinetic energy will disappear invisibly.

Using compressed air as the power source, 100% explosion-proof, safe and reliable.

2.It can run continuously for a long time, and the temperature rise of the motor is small for a long time, and there is no heat generation and no heat dissipation.

3.Gangong machinery piston pneumatic mixer can be stepless speed regulation. You only need to adjust the air intake volume, and the speed can be easily adjusted.

4.Forward and reverse rotation can be realized, and the forward and reverse rotation of the output shaft can be realized by changing the direction of the intake and exhaust, and the direction can be reversed instantaneously. A major advantage of the commutation operation of the air motor is its ability to rise to full speed in an instant.

The time to achieve forward and reverse rotation is short, the speed is fast, the impact is small, and there is no need to unload the load.

5.Work safety, not affected by vibration, high temperature, electromagnetism, radiation, etc., suitable for harsh working environment, in flammable, explosive, high temperature, vibration, humidity, dust and other adverse conditions can work normally.

6.There is overload protection and will not fail due to overload. When the load is too large, the pneumatic mixer only reduces the speed or stops, and when the overload is lifted, it can immediately resume normal operation without causing damage to the machine parts and other failures.

· Pneumatic. The mixer has explosion-proof function and can operate safely in a variety of environments. (ATEX certification is mandatory, and all Gangong air motors are ATEX certified.)

The air mixer is a cold-running - expanding air naturally cooled motor.

The air motor is able to stop without damaging the equipment and without consuming energy when stopped.

Compared with electric mixers, air motors are compact and have a higher power-to-weight ratio.

The pneumatic mixer makes it easy to control speed and torque with a simple throttle, eliminating the need for expensive VFD drives.

The air motor is immediately reversible if required.

Before loading the air motor into the blender, make sure to follow these simple concepts.

Concept 1Air motor rotor isolation.

Do not connect the mixer shaft directly to the motor rotor. See figure. No 1 This is incorrect and will cause the shaft to bend and the axial load to act directly on the motor spindle bearing.

The result is premature rotor bearing failure, possible bending of the air motor rotor and rapid wear of internal components.

Air motor is the prime mover with compressed air as the working medium, it is a power device that uses the expansion of compressed gas to convert pressure energy into mechanical energy, the motor is divided into vane type, piston type, gear type, etc., among which the piston air motor has the advantages of low air consumption, high torque, low noise, free of oil and long service life.

The air motor uses compressed air as the power, which is explosion-proof and does not produce static electricity and sparks. The speed of the motor can be adjusted steplessly, and the speed of the motor is adjusted by the pressure of the air supply and the flow rate. There is no danger of overload, and the motor is overloaded, so it will not damage the motor itself, and the body temperature will not rise.

It can work continuously with full load for a long time, rotate in both directions, realize forward and reverse functions, easy to operate, and simple to maintain and overhaul.

1. The appearance is different: the mixing drum of the horizontal mixer is horizontal, while the mixing drum of the vertical mixer is vertical.

2. The working principle of the horizontal mixer: the horizontal cylinder is equipped with a slurry blade with a double shaft rotation and reversal, and the slurry blade will circulate and stir the material along the axial and radial directions at a certain angle, so that the material can be quickly mixed and evenly The performance characteristics of the horizontal mixer The rotation speed of the reducer driving the shaft and the structure of the paddle will weaken the gravity of the material, and with the lack of gravity, the difference in particle size and specific gravity of each material is ignored in the mixing process.

The working principle of the vertical mixer is: the rapid rotation of the spiral is used to lift the raw materials from the bottom of the barrel from the center to the top, and then throw them in an umbrella shape and return to the bottom, so that the raw materials are tumbled up and down in the barrel, and a large number of raw materials can be evenly mixed in a short time.

3. The uniformity is different: the uniformity of the horizontal mixer can reach more than 99% and the heating is uniform, and the uniformity of the vertical mixer is generally about 90%.

4. The mixing blades are different: the mixing blades of the horizontal mixer are spiral belt type, 360 degree double S type spiral belt, and the uniformity is high; There is only one screw shaft in the middle of the vertical mixer to drive the material to mix.

1. The appearance is different: the mixing drum of the horizontal mixer is horizontal, while the mixing drum of the vertical mixer is vertical.

2. The working principle of the horizontal mixer: the horizontal cylinder is equipped with a slurry blade with a double shaft rotation and reversal, and the slurry blade will circulate and stir the material along the axial and radial directions at a certain angle, so that the material can be quickly mixed and evenly The performance characteristics of the horizontal mixer The rotation speed of the reducer driving the shaft and the structure of the paddle will weaken the gravity of the material, and with the lack of gravity, the difference in particle size and specific gravity of each material is ignored in the mixing process.

The working principle of the vertical mixer is: the rapid rotation of the spiral is used to lift the raw materials from the bottom of the barrel from the center to the top, and then throw them in an umbrella shape and return to the bottom, so that the raw materials are tumbled up and down in the barrel, and a large number of raw materials can be evenly mixed in a short time.

3. The uniformity is different: the uniformity of the horizontal mixer can reach more than 99% and the heating is uniform, and the uniformity of the vertical mixer is generally about 90%.

4. The mixing blades are different: the mixing blades of the horizontal mixer are spiral belt type, 360 degree double S type spiral belt, and the uniformity is high; There is only one screw shaft in the middle of the vertical mixer to drive the material to mix.

Horizontal mixer and vertical mixer are two completely different products, one is the whole barrel of material in the barrel mixer, but the vertical type can be mixed while throwing, feeding is more convenient, anyway, each has its own strengths, each has its own shortcomings! Just like people, they can't be perfect. The two devices can be said to be complementary.

1. The horizontal equipment is slightly higher, suitable for small and medium-sized enterprises, individual users, and is an upgraded alternative to the vertical mixer; Vertical equipment** is low-profile and is suitable for individual users who are just starting out with a small investment.

2. The horizontal equipment has a fast stirring speed, which is the use of double-shaft and multi-spiral belt stirring, and the mixture is all rotated, with fast rotation speed and high performance; The stirring speed of the vertical equipment is slow, because the mixture is local stirring, the performance is low, and the stirring effect is not ideal.

3. The horizontal equipment has a high degree of mixing uniformity, the mixture rotates in all directions, and the mixing does not leave dead angles and the quality is high; The vertical equipment has a low degree of mixing uniformity, which is composed of the principle of rotating and throwing up a part of the mixture, and the quality of the mixture is not guaranteed.

4. The rotating bearings of the horizontal equipment are on both sides of the equipment, the mixture is not easy to wrap the bearing, and it is equipped with a reducer configuration, which is simple to operate and easy to use, and the horizontal equipment has a wide range of use, which can be used for the production of various mixtures such as mortar, putty powder, gypsum, etc.; The maintenance rate of vertical equipment is relatively high, and the rotating bearing is at the lower end of the equipment, and the bearing is easy to be wrapped in the mixture and fail. For more information, please refer to it.