Gionee mobile phone stuck in the boot interface? Gionee mobile phone stuck on the boot screen for wh

Hello, the phone has been stuck on the boot screen when it is turned onSolution :

1. Force press and hold the power button to restart the phone;

2. After restarting, you still can't enter the desktop, you can only restore the factory settings;

3. The above two steps are not allowed, and the after-sales service station is sent for repair.

The steps to do a factory reset are as follows:

1. Turn off the phone completely;

2. When the phone is turned off, press the power button first, and then immediately press the volume down button + volume up button at the same time and don't let go, it will enter recovery after a while, note: press the volume up and down keys in recovery mode to select, and press the power button and home button to indicate OK;

3. After entering the recovery mode, you can choose to restore factory settings, whether your phone is the recovery that comes with the system or the recovery of a third party, as long as there is [wipe data factory reset];

4. Select [Wipe Data Factory Reset], then press the boot button to confirm, and then select [yes - delete all data].

5. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.

This should be a problem with your mobile phone system, and it is recommended to go to the after-sales service to deal with it.

Gionee's mobile phone is stuck on the boot screen?Let's take a look.

1. Check whether the battery is too low, connect the phone to the original charger and charge it for a period of time before turning it on.

2. Some machine batteries are removable, it is recommended to reinstall the battery and turn it on again, if it is invalid, please replace other original batteries.

3. If the phone is stuck or unable to enter the system interface after turning on, please press and hold the power button for 8-10 seconds to restart the phone.

4. If it is a built-in battery, please press and hold the power button and the down volume button at the same time for more than 7 seconds to restart the device.

5. If the problem still exists, it is recommended to bring the purchase invoice, repair card and mobile phone to the local service center for testing.

Pro: I'm honored to answer for you, if your Gionee phone boot does not show up, you can try the following methods:1

Check if the battery is charged: Connect the phone to the charger and plug it into the socket, observe if there is a charging indicator that lights up the family code, if it does, wait a few minutes before trying to turn it on. 2.

Force Restart: Press and hold the power button of Hu Sui's mobile phone for more than 15 seconds, and wait for a period of time before trying to turn it on. 3.

Enter recovery mode: Press the volume + button and the power button at the same time to enter recovery mode, and then perform operations such as factory reset or cache clearing. 4.

If your Gionee phone doesn't show up when it is turned on, you can try the following methods:1Check that the battery has enough power.

2.Make sure that the phone screen is not damaged. 3.

Try plugging your phone into the charger. 4.If the screen still doesn't show up, try pressing and holding the volume down and power keys before pressing the power button until your phone goes into recovery mode.

If none of these methods solve the problem, you should contact Gionee's customer service department or go to an official service center for help. It is possible that the hardware is broken and the motherboard needs to be replaced. Hope mine works for you!

Have a great day! Give a thumbs up in the bottom left corner! Thank you!

Summary. Hello dear, happy to answer your <>

If Gionee phone does not show up when it is turned on, you can try the following methods:1Confirm if the battery is charged:

If the battery is low, the phone may not display properly when turned on. Please connect your phone to the charger to charge it before trying to turn it on. 2.

Dealing with software problems: If Gionee mobile phone has a system failure or application conflict, it may cause the boot not to be displayed. You can try to enter the safe mode of your phone to determine if it is caused by a software issue, and then take appropriate action or reset your phone.

3.Dealing with hardware problems: If Gionee mobile phone does not display when turned on, it may be a hardware problem.

You can check your phone for physical damage, such as a broken screen or a loose internal cable that needs to be repaired <>

What should I do if Gionee mobile phone does not display when it is turned on.

What should I do if Gionee mobile phone does not display when it is turned on.

Hello dear, happy to answer your <>

If Gionee phone does not show up when it is turned on, you can try the following methods:1Confirm if the battery is charged:

If the battery is low, the phone may not display properly when turned on. Please connect your phone to the charger to charge it before trying to turn it on. 2.

Dealing with software problems: If Gionee mobile phone has a system failure or application conflict, it may cause the boot to not be displayed. You can try to enter the safe mode of your phone carefully before you try to determine if it is caused by a software problem, and then take appropriate action or reset your phone.

3.Dealing with hardware problems: If the Huiyin Jing Gionee mobile phone does not display when it is turned on, it may be a hardware problem.

You can check your phone for physical damage, such as a broken screen or a loose internal cable that needs to be repaired <>

Here are some <> related extensions that we hope you will find helpful

Reboot your phone: Sometimes, simply restarting your Gionee phone can also solve the problem that it won't show up when it is turned on. Press and hold the power button to turn off the phone.

Shan Qiaoyu then turned the phone back on to see if it could be displayed normally. If the above methods cannot solve the problem, it is recommended to seek professional help <> from a regular maintenance station or Gionee after-sales service center

How to reset your phone.

Dear, the method of resetting the phone varies depending on the brand and the version of the source system in operation, and the following are the steps that generally apply:1Find the "Backup & Reset" or "Factory Reset" option in the settings.

2.In the "Backup & Reset" or "Factory Reset" option, select "Factory Reset" or "Erase Data". 3.

Confirm the operation, and the phone will automatically restart and clear the early reputation of the data. It should be noted that resetting your phone will restore all data and software to the state of your phone's factory settings, so be sure to back up your important personal information and files before operating to avoid data loss <>