Panasonic refrigerator NR C23VG1 is not a recalled model

Hello! I'm from the technical department of Panasonic refrigerators, and your refrigerator is a recalled model, but please check the production date of your refrigerator!

It is also this model in my house, which is C25, which belongs to the range. **: Beijing Call Center**800-803-6118 to contact the door-to-door free maintenance matters left on the web page.

Wuxi Panasonic Chiller**** is recalling a total of 29 models of Panasonic refrigerators produced between March 2007 and March 2009 in the B20 B26 and C23 C29 series nationwide, Chinese mainland involving a total of 365574 units.

If you see that the model is in the scope of the recall, go and contact the dealer.

Satisfied? I'm a newbie, take care of it! ~~

It's miserable, my house is this NR-C23VG1-WA

It's just a 5-1 buy, I don't know how. Just go back and look at the production date.

In the lower left corner of the freezer compartment of the refrigerator is the third door closest to the floor. When the door is closed, the cold air will leak out. There is a 2 mm gap between the door and the refrigerator.

The air conditioner keeps leaking. After the after-sales came, I changed one. It's still the same problem.

I hope you pay attention. Because this quality problem is really not easy to find. Or when mopping the floor, there is no opinion to find.

My refrigerator was also newly bought, and it took a month to find out this problem. I hope everyone who has bought this model will go and see it. Today's new one is the one that left the factory in 09/06.

The one that was returned was shipped in March '09.

Yes, Panasonic is recalling 29 models of Panasonic refrigerators manufactured between March 2007 and March 2009, including the B20, B26, C23, and C29 series.

Yes, it depends on when it was produced. 2007-3 to 2009-3 are within the scope of the recall.

Panasonic refrigerator NR-C320AC-XN shows that U is fault**, the reasons are as follows: (1) Power supply problem: When the refrigerator does not work, we should first check whether the connection of the power supply is normal, check whether the light in the refrigerator is normal, and further test with an electric pen.

2) Compressor problem: If the power connection is normal, you can listen to whether the compressor is working normally. The compressor emits a small motor vibration sound during normal operation.

When the high-pressure output buffer pipe in the compressor is broken, or the screw fixing the tube is loose, resulting in the high-pressure pipe not exhausting and the low-pressure pipe not suctioning, then the refrigerator will stop running. Solution: Open the casing, replace the buffer tube, or tighten the screws.

3) Refrigerant: If the compressor can work normally, you can listen to the problem of refrigerant: whether the amount is insufficient, such as abnormality

Add a small amount of refrigerant.

Summary. 1.Open the door and see if the light in the box is on to determine if the electricity is on.

If the light is not on, use an electric pen or check whether the socket has electricity and whether the plug is well connected. Because it is not plugged in, it cannot be cooled normally, as long as it is plugged in. 2.

Check whether the voltage is lower than 187 volts, because the normal voltage of electricity according to the national standard is 187V-242V (unless otherwise stated by the manufacturer), and the compressor below 187 volts can not be effectively started normally. 3.When the environment is lower than the normal start of the controller, check whether the electric cryogenic switch is turned on.

Only when the low temperature switch is turned on can the controller be forcibly turned on. First of all, the electricity is installed, and it does not meet the requirements, so it does not stop. 4.

If the compressor does not stop around the clock, the freezer may cause the refrigerant to be refrigerated to the limit. Most of this phenomenon occurs in air-cooled cases. It was the evaporator that broke down and caused the ice blockage.

It cannot be ruled out that the air-cooled fan is broken, and there are too many items inside the air outlet to block it, causing poor cooling effect.

Panasonic refrigerator NR-C25VG1 can not be refrigerated normally, Zen can be refrigerated normally with quick freezing, and even the temperature drops to -28 degrees, and the quick freezing button cannot be refrigerated normally, and the freezer of the chain shed shows -12 is always flashing, what is the problem of calling for cracking?

1.Open the door and see if the light in the box is on to determine if the electricity is on. If the light is not on, use an electric pen or check whether the socket has electricity and whether the plug is well connected.

Because it is not plugged in, it cannot be cooled normally, as long as it is plugged in. 2.Check whether the voltage is lower than 187 volts, because the normal voltage of electricity according to the national standard is 187V-242V (unless otherwise stated by the manufacturer), and the compressor below 187 volts can not be effectively started normally.

3.When the environment is lower than the normal start of the controller, check whether the electric cryogenic switch is turned on. Only when the low temperature switch is turned on can the controller be forcibly turned on.

First of all, the electricity is installed, and it does not meet the requirements, so it does not stop. 4.If the compressor does not stop around the clock, the freezer may cause the refrigerant to be refrigerated to the limit.

Most of this phenomenon occurs in air-cooled cases. It was the evaporator that broke down and caused the ice blockage. It cannot be ruled out that the air-cooled fan is broken and the air outlet is blocked by too many items, causing poor cooling effect.

If the compressor is still running, it may be dirty, the filter is dirty, mainly because of the freon gas and impurities in the refrigeration system and the high temperature tremor and high pressure of the compressor during operation, which makes the refrigeration oil partially vaporized and condensed on the filter screen. The oil stain and impurities of the filter solidify together to block the filter screen, so that the refrigerator cannot be refrigerated. Hope it helps! ~

I bought it in 2004, but the quality is not very good, can I recall it?

Hello! The specific models are as follows: B20G1, B21D3, B21Dx1, B23Dx1, B25M1, B25VG1, B25VX1, B25WS1, B26M2, C23VG1, C23WP1, C25VD2, C25VG1, C25VG2, C25VP1, C25VP2, C25VX1, C25VX2

c25ws1、c26fg1、c28vd2、c28vdx、c28vg1、c28vg2、c28vp1、c28vp2、c28vx1

c28vx2、c29fg1

1.First of all, you can check whether it is a problem with the power supply, you can open the door of the box to observe whether the light in the box is lit, or test the power cord with an electric pen to see if the wire is damaged, such as being bitten by mice.

2.If the power supply is fine, listen to the refrigerator if there is any movement, for example, whether the motor is vibrating, if there is a sound, it means that the compressor is fine, if there is no movement, it may be that the motor is burned out, because the compressor is the most core part.

3.If the motor is running and the compressor is running, then check whether there is no refrigerant or fluorine leakage, and you need to add it again.

4.Unless you are familiar with the refrigerator, you may accidentally tear off any thread in the process of disassembly, resulting in more trouble, you can call a professional master to come and check it.

Let me say a few words! Can you disconnect the power supply? How many minutes are inserted? Then turn on to select auto mode? It should be fine.

The reason why the refrigerator is not refrigerated is that the refrigerator thermostat is installed in the refrigerator, and the temperature of the refrigerator does not reach the temperature required by the thermostat, so it does not stop. If the compressor does not work around the clock, the freezer compartment may cause the refrigerant to reach the maximum refrigeration temperature. Most of this phenomenon occurs in air-cooled refrigerators.

The reason is that the evaporator flower froster in the cold room is broken, which produces an ice blockage. It cannot be ruled out that the air cooling fan is broken, and there are too many items in the refrigerator to block the air outlet, causing poor cooling effect.

The temperature of the refrigerator is automatically adjusted with the temperature adjustment of the freezer, and the temperature of the freezer can be lowered. Generally, the temperature of the refrigerator room is 4-10 degrees Celsius. Note that the higher the number of the temperature controller, the lower the temperature, the higher the number in summer and the smaller number in winter.

In addition, the refrigerator door is often opened, and there are many items in the refrigerator, resulting in the refrigerator not being refrigerated or the refrigeration effect is not ideal.

One of the reasons why the refrigerator is not refrigerating is that there is a problem with the refrigerator compressor. The compressor can start, remove the return pipe and block the outlet with your fingers, check how much the pressure is, if it is too low, then there is a problem with the compressor The compressor can not be started, check whether the refrigerator power supply is plugged in. If you still can't solve the problem, please find a professional who repairs the appliance.

Does the three-door refrigerator have a smart mode, does the refrigerator store food? See if the mode is right and if the temperature is set correctly.

Panasonic Refrigerator NR-C25SPD1-S is slightly frosted, not frost-free.

This refrigerator is a direct-cooling refrigerator that can be manually defrosted after frosting. Whereas, frost-free refrigerators usually refer to air-cooled refrigerators.

In addition, the frost-free refrigerator is not really frost-free, its working principle: the defrosting timer calculates that the compressor stops the power supply to the compressor and the circulating fan after 17-24 hours of operation, and at the same time supplies power to the evaporator and the heating wire of the water tank after the defrosting thermostat and temperature insurance, and disconnects the power supply to the heating wire when the defrosting thermostat monitoring reaches the critical point (the temperature at which the defrosting thermostat is located) (if the defrosting thermostat reaches the critical point and is not disconnected, the temperature insurance will be overheated and disconnected) At this point, the defrosting process is over, The timer then resumes power to the compressor and delays a few minutes to power the circulating fan and re-cooling begins.

1. After the after-sales machine is pulled away, it is said that the "refrigeration aluminum tube" is leaking, which is not credible; If these areas are not touched, the possibility of a tube leak is very small.

2. The valves on the refrigeration pipeline will not be damaged under normal circumstances.

3. It is recommended to confirm the failure one by one with the person who pulls away the machine, and if the final maintenance cost exceeds 800 yuan, it is recommended to sell it directly according to the scrap and buy a new machine.

4. When buying a new machine again, it is recommended not to consider some foreign or joint venture brands, as long as it is an ordinary product in a large domestic brand.