When the original win7 system is installed with win10 system, manual intervention is interrupted, an

If you want to redo the system, then you can use the U disk to make a boot disk, such as U boot, U depth, and then put the ** system into it. Start from the USB flash drive, enter the PE system, format the C disk, install the system into the C disk, restart the computer after installation, unplug the USB flash drive, wait to enter the system, and do not power off halfway.

This must have been interrupted when installing the system, resulting in a system crash, there was a problem, and you can only reinstall the system

You're interrupted in the process of installing the system. Caused damage to the system. If you use a USB flash drive to make a PE microsystem, if you don't format the whole disk, you may be able to back up the previous things, but it's just the things in the disk other than the C disk.

As long as the capacity of the U disk is enough, any U disk can do,If you don't understand it at all, you still call a professional to help you,Otherwise, you can also use the U disk to redo the tutorial of the system。 It won't be too complicated either.

If you are just a computer user and do not understand all aspects of the structure of the computer, it is recommended not to operate blindly, the computer is not a diary to write wherever you want. Computer C drive belongs to the default category, each system has thousands of files matched, once a file is damaged, only professional programmers can repair it, and even ordinary computer repairers can only rely on professional tools to complete the repair. If you have relevant important documents in the C drive, it is recommended to find a professional, and the reinstallation system will not be there.

Reinstalling the system solves all the problems, but the things on the C drive are gone, and at the same time teach you a lesson, don't put the things on the C drive.

If the file is really important, you can go directly to the win7 you have installed and put the files in the C disk on other disks.

As for the U disk, as long as it can be used, note that all the U disk data will be emptied, so you should back it up before using it.

I won't go into detail about how to use the U disk system, see my article:

If you have a problem with the computer, make a multi-functional installation + maintenance USB flash drive for yourself! Computer.

Generally, there is no way to recover from the interruption during the system installation process, only by reinstalling the system, the original system can be restored in the following situations:

1. If the recovery partition of the pre-installed machine is not damaged, you can press the charm button to start a one-key recovery in the shutdown state, and you can operate according to the prompts.

2. After the system installation is completed, the system has been backed up, and the backup can be found in the backup system under the USB disk PE under the USB flash drive to restore the original system, and the backup tool that comes with the Windows system can be used as the boot disk with the same version of the system floppy disk, and the backup can be called to restore the original system after the boot disk is started.

When the computer reboots and the screen is on, select 10

This situation is usually caused by a driver error or incorrect configuration in the system. In this case, you can restart it directly, and if the system is not damaged, you can re-enter the system; If you can't access it, you can press [F8] when you boot up, select [Last Correct Configuration], or enter [Safe Mode] to restore the system. Here's a closer look:

1. Start the computer, and press and hold the power button to force the shutdown when booting to the Windows 10 boot logo; Repeat the steps for about 3 times to start, and the advanced startup menu will appear, select [Troubleshooting] to enter; Then select [Last Correct Configuration], and then restart the computer to see if it can enter the computer normally;

2. You can also choose to enter [Safe Mode] in the advanced boot menu, click [Start] - [Settings] - [Update & Security] - [Recovery] in order after entering the system, click the [Start] button under [Reset this computer] on the recovery page, select [Keep My Files], and finally follow the prompts to select Next, and select [Reset] at the end, and wait for the initialization of the computer to be completed.

Cause analysis: This situation is usually caused by a driver error or incorrect configuration in the system. This can be solved in the following ways.

1.Start the computer, and when you boot up to the Windows 10 boot logo, press and hold the power button to force it to shut down.

2.Repeat the steps 3 times or so after booting up "Choose an option" appears, or repair the computer interface.

3.Then we select Troubleshooter to enter.

4.Once you're in troubleshooting, select Advanced Options.

5.Next, we select "Startup settings".

6.Next, in the startup settings, we can see the multi-options, which cannot be selected at this time, Windows needs us to restart first to activate these options, we can click on restart.

7.After restarting, we can see a number of special boot mode options, including "Safe Mode", after which we can enter Safe Mode. (You can press the number keys to select the system you enter).

9.Right-click the driver under the graphics card, uninstall it, and then restart the computer to install the new version of the graphics driver.

This is the so-called blue screen, there is nothing to do, long press the power button to turn off and turn it back on! Then fix the following with the 360 Blue Screen Repair plugin to avoid frequent occurrences of this problem.

By the way, the blue screen is a means of self-protection of the system, for example, the system suddenly finds that your computer system and hardware are incompatible, and it will forcibly shut down, which is the so-called blue screen. (I'm just giving you an example, that's not necessarily the reason for your question).

Personal experience: If the memory module is broken, unplug and reinsert it, it is really impossible to change the memory module, 90% of the memory module is broken. Don't waste your time trying anything else, I wasted two days trying some of the bad ideas that the retarded have to offer.

I can't move the mouse or keyboard on the computer screen.

Take the main unit or laptop or all-in-one computer to the computer store and send it for repair.

If it is a touch all-in-one machine, it can only be repaired at home.

Uh-huh, uh-huh, goose-goose-goose

How to force a shutdown and then turn it back on.

1. Open it and select Create a New Virtural Machine

2. Select the typical installation mode on the installation method panel.

4. The name of the system selected for installation is win7, and here we install a 32-bit win7 system. Then the next step.

5. Give a name to the installed virtual machine, and then select the bit of the system installation, here for management, a win7 folder has been established in the e disk, which is specially used to manage the virtual files of win7.

6、Set the virtual hard disk size for the win7 system,Because the win7 system itself is relatively large,Funny so we use the default use of the system60G,Of course, if your hard disk space is insufficient, you can also be more than 30G。

7. Click Finish to complete the pre-installation preparation tool.

8. Turn on the power of the virtual machine, turn on the virtual machine, the operation at this time is basically the same as the computer button, you can press Ctrl+Alt+Enter to maximize the virtual machine, and then operate.

9. Because we have added the installation image before, at this time the system enters the disc menu, first of all, we choose to partition the hard disk, because the hard disk is 60G, if it is not partitioned, there is only one C disk after the default installation, but this may not be what we want, here I partition the hard disk, this partition is carried out in the virtual machine, so it will not have an impact on the local system.

10. Here I divide the virtual hard disk into two areas, the main partition is 30G, and the extended partition is 30G.

11、After the partition ends, it will restart the win7 virtual system,At the beginning of the startup, press the ESC key,Display the boot menu,Here we choose to boot from the CD。

12. After booting from the disc, it will go directly to the disc installation menu, at this time we can manually choose to use ghost to install, or it can be installed automatically, here I choose to automatically install to the first partition. This depends on your disc menu.

13. At this time, we can see that win7 has begun to clone the image installation, and the rest is to wait.

After about 10 minutes of device installation, driver installation and related testing, win7 was successfully installed. Because the installation is automated, no human intervention is required during this period.

After the system updates to win10, the startup and other aspects of the operation are normal?

If the system cannot be started normally, and after the restart, the safe mode and the system desktop cannot be entered normally, it may be that the system update has failed.

Let's see if you can roll back to the original system normally.

If that doesn't work, you can consider reinstalling the source collapse system. If you don't have a win10 installation file, you can install a win7 or above version first. On this basis, install a Tencent computer manager.

The win10 system can be re-upgraded through the housekeeper software:

1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system).

2. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired ones.

3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".

4. If the fault persists, it is recommended to reinstall the operating system.

Use the system that comes with the system restore method:

The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the restore point, after you select, click Next Restore (win7 restore the system, in the control panel then the device and security sub-option and then the backup and restore sub-option).

Startup Manager Windows failed to boot because of hardware and software changes, and even an instant "auto-repair" was ineffective.

2.The new partition uses the partition software win pmwin 7 can not use win pq, there will be incompatibility, set the partition as the active partition, find a win pe disc to repair.

3.Modify the size of the system partition to divide the new free space before the partition, it will damage the normal boot of the system, move the free space to the system partition on it, if not, there is no important information, reinstall it again.

Windows Startup Manager Windows failed to boot, probably due to recent hardware and software changes, steps to fix this problem, such an error, even "auto-fix" is not effective.

Which disk is win7 reinstalled on? Is the original XP partition or a new partition?

If it is a new partition, you need to use partitioning software such as win pm (win 7 cannot use win pq, it will be incompatible) to set the partition as the active partition. You can find a win pe disc to repair it.

Alternatively, if the size of the system partition has been modified (e.g., by dividing a new free space before partitioning), it may compromise the normal booting of the system. In this case, the only way to do this is to move the free space to the system partition.

If it doesn't work, if you don't have any important information, it will be much easier to reinstall it again.

I used this software and later had two operating systems.

Have you solved it? I'm also using this software to reinstall and have this problem. How did you solve it?

Your original system should be win10, right? Win10 reinstall the system for win7, you need to modify the BIOS settings, you have not modified the BIOS settings, directly install the win7 system, it will lead to a blue screen, can not be turned on, infinite restart, the system disk can not operate normally.

You can search on the Internet for how to modify your computer model BIOS to reinstall Win7, such as "Lenovo IdeaPaD310S Win10 system how to modify BIOS to reinstall Win7 system", so according to the steps, modify the BIOS settings first, and then reinstall the system.

Hello,This is a system partition problem,The system must be installed in the active partition,Use the U disk to reinstall the machine to use the partition master,Direct one-click partition can be done,Then repeat the installation steps,That's it,Okay, that's it。