Are aluminum composite panels and aluminum panels one material? and aluminum plate paint problems

Many masters in Guangdong call aluminum-plastic panels aluminum-panels! It's just a colloquial name for them, not strictly a material! There are many types of colors of aluminum-plastic panels, as well as imitation stone and metal texture, and various wood grains

Aluminum sheets are available without color! Most of the aluminum plates used for decoration in the building materials market are colored, and there are many types of colors! (There are not as many colors as aluminum-plastic panels!) )

There is already a color, and what kind of lacquer ?? bakedI don't understand! If you insist on baking your own paint, it's best to use uncolored aluminum sheets! Aluminum-plastic panels should be made of metal surfaces, such as metallic silver and silver brushed

In addition, if there are requirements for the temperature of the paint, such as a high temperature, then only aluminum plate can be used, (aluminum composite panel will be melted!) Of course, the iron plate is no problem!

In addition to fluorocarbon paint, metallic paint is a good choice, that is, spray car paint!

It's no problem to bake a few colors on one plate! However, it needs to be operated by experienced people, and improper operation will bite the paint, resulting in the waste of previous efforts!

1.Aluminum-plastic panels are composite panels, and the content of aluminum is not high. There are about 20 kinds of common colors on the market, which are much lower than aluminum plates. Change the color on the finished product, you can take the way of spray painting.

2.Aluminum plate is a metal plate of pure aluminum. Aluminum plates have aluminum natural color, and can also be processed into various colors according to different needs, and most manufacturers use fluorocarbon paint spraying.

Regular manufacturers generally provide a warranty to ensure that it will not be colored for 10 years. 2 colors on 1 board can be done theoretically, but it is difficult to double manually, and in practice, construction is difficult. Aluminum plate ** is more expensive (the unit price of 2mm aluminum plate is about 230 yuan square), so it is not recommended to paint yourself, so as not to regret.

1. The advantage of aluminum plate is that it is lightweight material, which reduces the load of the building and provides good selection conditions for high-rise buildings; Excellent waterproof, anti-fouling and anti-corrosion performance, which ensures the long-lasting growth of the outer surface of the building; Processing, transportation, installation and construction are relatively easy to implement; High performance** ratio, easy maintenance and long service life.

2. The disadvantage of aluminum plate is that the anti-deformation ability is insufficient; Poor waterproof sealing; The thermal conductivity is very high, and the heat retention and thermal insulation performance are relatively poor.

3. The advantage of aluminum-plastic panel is that it not only retains the main advantages of the original constituent materials (metallic aluminum, non-metallic polyethylene plastic), but also overcomes the shortcomings of the original constituent materials, and then obtains many excellent material properties, such as luxury, colorful decoration, weather resistance, corrosion resistance, impact resistance, fire prevention, moisture resistance, sound insulation, heat insulation, and earthquake resistance; Light weight, easy processing and molding, easy handling and installation.

4. The disadvantage of aluminum-plastic panel is that the deformation resistance of the curtain wall system is poor, the strength itself is low, and the heat resistance is poor, so the overall strength and safety of the processed aluminum-plastic panel cannot be guaranteed.

Aluminum-plastic panel and aluminum-veneer are the more common materials we use in decoration; However, it is still relatively unfamiliar to unprofessional people, especially the owners are also confused in the selection of materials. In many cases, when we let the decoration company do all-in, we also need to know some knowledge about the materials, so as to avoid us being deceived by the decoration company. Next, let me share with you the relevant knowledge about aluminum composite panels and aluminum veneers.

1. What is the material of aluminum-plastic panel?

1. Aluminum-plastic panel is composed of multi-layer materials, usually aluminum-plastic panel is composed of three layers, the first layer and one layer are made of aluminum skin, and the middle layer is mainly plastic, so the materials of aluminum-plastic panel are mainly aluminum skin and plastic, and because of its multi-layer structural characteristics, its corrosion resistance is also very strong.

2. Aluminum-plastic panel is made of a special process, because it has good moisture-proof performance and wear-resistant performance, so it is a relatively common board in building decoration. Due to its very good wear resistance, its service life is relatively long, so it will be more expensive.

Second, the difference between aluminum-plastic panel and aluminum-veneer is **.

1. The number of layers is different.

The number of layers of aluminum veneer is generally composed of two layers; The layer is mainly made of aluminum skin, and the second layer is generally made of plastic, but as an aluminum-plastic panel, it is generally made of three layers, and the layer and the first layer are all made of aluminum. Therefore, the difference between them can be observed by observing the number of layers, and the general aluminum-composite panel is composed of three layers.

2. The quality is different.

Because the aluminum-plastic panel has one more layer of aluminum skin than the number of layers of aluminum veneer, its wear resistance and corrosion resistance will be much better, so the quality of aluminum-plastic panel is much better than that of aluminum veneer.

3. **Different.

Because of the aluminum-plastic panel, it uses more aluminum skin, so it is more expensive than aluminum veneer in the first place; If the material requirements are not so strict, we can consider using aluminum veneer, which is relatively cheaper after all. If the quality requirements are stricter, it is necessary to consider aluminum-composite panels, because its service life will be longer.

4. The construction effect is different.

If you choose aluminum-plastic panel, its plasticity is very strong, and its corrosion resistance is also relatively strong, so it is not easy to have problems in the process of use. However, aluminum veneer cannot be bent and will easily cause breakage.

The above is what material is made of aluminum-plastic panel to share for you, and the difference between aluminum-plastic panel and aluminum-veneer is the relevant knowledge, I hope it will help you. If you want to know more about aluminum composite panel and aluminum veneer, please stay tuned.

1. In fact, it is a new type of decorative material, which has been widely used in curtain walls and interior decoration. It is a kind of plate composed of aluminum and juesen plastic, which is bonded into a plate by a special adhesive, and then the plate is coated and compounded with a plastic core.

2. The surface of this plate is very good-looking, and the good-looking surface is also covered by related coatings, not only that, but the back is also coated with some protective materials. This material is very economical to use at home, and the effect is also very good, but in the process of choosing, you must choose the best products, poor quality limb products, it is very likely to cause harm to the human body.

Aluminum-plastic panels are made of metallic aluminum and non-metallic polyethylene plastics through some special processes, which have the main characteristics and advantages of aluminum and polyethylene. Corrosion-resistant, impact-resistant, fire-proof, moisture-proof and soundproof, this material is often used in some architectural decorations. In terms of appearance, aluminum-plastic panels have many colors and appearances, which are highly decorative and look more luxurious.

And this material is very light, and it is relatively easy to form during processing, which is convenient for transportation and installation. Therefore, many curtain walls will also be made of aluminum-plastic panels.

The aluminum-plastic composite panel is composed of multi-layer materials, the upper and lower layers are high-purity aluminum alloy plates, and the middle is a non-toxic low-density polyethylene (PE) core board, and a protective film is pasted on the front. For the exterior, the front of the aluminium composite panel is coated with fluorocarbon resin (PVDF), and for the interior, the front side can be coated with non-fluorocarbon resin.

Uses of aluminum-plastic panels:

1. Building exterior wall and curtain wall panels.

2. Modification and renovation of the exterior wall of the old building.

3. Balconies, equipment units, and indoor compartments.

4. Panels, identification boards, display stands.

5. Interior wall decorative panels, ceilings, advertising signs.

6. Industrial materials, body of cold-insulated car.

7. Shells of household appliances such as air conditioners and televisions.