What material is used for the dust filter in the case and how to install it? 50

The main material of the chassis is steel plate, and a high-quality chassis should be made of press-resistant galvanized steel sheet. And the thickness of the steel plate should be more than 1mm, and the better chassis is even made of the above steel plate. The quality of the steel plate is an important indicator to measure the quality of a chassis, which directly determines the quality of the chassis.

The installation sequence of the chassis is generally as follows:

1.Installation: The side panel with holes is seen to install the 4 jacks, and the wind blows inward, and the rear of the 2 jacks (that is, on the hardware plate behind the case) is pumped outward.

2.Wiring: 4 jacks directly plugged into the power wiring, 2 jacks if it is also a large plug directly plugged into the power supply, small if connected to the motherboard, see that the pins are corresponding can be plugged in directly.

The landlord recommends not to get that, and after getting it, it doesn't dissipate heat. I've thought about it, there's no dust, there's no emptiness, it's useless, it's true.

Hello, I am happy to serve you and make the following answer for you: the case dust filter can be washed, but pay attention to the following points: 1

Put the case dust filter into warm water, do not use hot water, so as not to damage the structure of the case dust filter. 2.Put the case dust filter in warm water, add an appropriate amount of detergent, and scrub it by hand to remove dirt.

3.Put the case dust filter in warm water and rinse with clean water to remove the residue of detergent. 4.

Place the case dust filter in warm water and wipe it with a towel to remove water droplets. 5.Place the case dust filter in warm water, wipe with a towel to remove water droplets, and place in a cool place to dry.

Personal Tips:1When washing the case dust filter, pay attention to the temperature and do not use hot water, so as not to damage the structure of the case dust filter.

2.When washing the dust filter of the chassis, pay attention to the use of detergent, and do not use detergents containing corrosive and non-evokling substances, so as not to damage the structure of the dust filter of the case. 3.

When washing the case dust filter, pay attention to wiping it to remove water droplets, and then place it in a cool place to dry, so as not to affect the use of the case dust filter.

Dustproof method 1:

Look at the appearance of the air inlet and find a way to install a dust filter. The dust net is 10 yuan a large sheet, and you can find a way to cover the air inlet after cutting it yourself. You can take it off and clean it every 2 weeks of the month.

There is also a fan dust filter, which is covered on the air inlet side of the fan, and has a fixed size, but because the chassis has to be opened every time it is disassembled and washed, it feels a little inconvenient. My Dell Dimension 5150 is a dust filter attached to the air inlet, because the air inlet has a special shape, so you can get stuck by yourself without looking for something to reinforce. If you can't get stuck, think of a way to do it yourself, such as cellophane or rubber bands and paper clips.

Of course, it may affect the appearance.

Method 2: If conditions permit, you can change the main chassis, there is a kind of dustproof chassis such as the method 3 of the Power Train Dust Man series:

How much cleaning, not much to say, you must have paid attention to hygiene after asking so.

This can only be said to buy a hair dryer and soot blowing.

Then fix the computer at regular intervals to clean up the dust.

Also, when you don't use the computer, wrap the computer host with a cloth or plastic bag, but don't wrap it in a plastic bag when the computer is running.