SPS waterproof coating, SPU waterproof coating comes in several colors

There are three types of SPS waterproof coatings: 1 SPS polyurethane high-elastic waterproof coating, 2 SPS polymer cement-based waterproof coating, and 3 SPS water-curing environmentally friendly waterproof coating.

Don't know which one you're using?

SPS water-curing environmentally friendly waterproof coating is a two-component water-based environmentally friendly architectural waterproof coating composed of modified acrylic polymer, polymer emulsion, a variety of inorganic powders and selected additives. After mixing the liquid material with the powder in a certain proportion, a chemical reaction occurs to form a tough waterproof membrane, which has good adhesion to the substrate and can react with it to penetrate to form a tight and firm permanent bond, preventing the penetration of water, so as to achieve excellent waterproof effect. According to the different ratio of liquid powder and material, this product can be divided into elastic waterproof coating, flexible waterproof coating, ordinary waterproof coating, and different performance products can be selected for different projects to achieve high cost performance.

The type product is suitable for the base with a large amount of activity, and the type product is suitable for the base layer with a small amount of activity.

Features: 1. Non-toxic, harmless, non-polluting, water-based environmentally friendly coatings, which can be used in drinking water projects.

2. It has a certain degree of flexibility and firm adhesion to the base surface.

3. It is simple and easy to use, can be constructed on a wet base surface, and can be directly paved with a decorative layer on the waterproof layer.

4. Acid and alkali resistance, corrosion resistance, aging resistance.

5. It has excellent water resistance and remarkable anti-leakage effect.

Scope of application. It is suitable for wet or long-term immersion of the base surface, such as basement, kitchen and bathroom, bathroom, pool, floor and other waterproof, moisture-proof, balcony, roof (non-exposed) waterproof, bridge, highway.

Ordinary waterproof coatings are especially recommended for waterproofing in general parts such as kitchens and bathrooms, pools, fish ponds, balconies, etc., and flexible waterproof coatings are especially recommended for waterproofing and impermeability of basement rafts, waterproof boards, brick walls, lightweight brick wall structures, floor walls, floors, floors, floors, roofs, etc. The elastic waterproof coating is especially recommended for concrete structures with special requirements such as large grain depots, major engineering buildings, high-speed railways, highways, national or provincial major engineering projects, and key buildings.

Water-cured SPS? Is it polymer cement? Is water-cured polyurethane? Whether the specific quality is first depends on whether the construction company is regular, and then whether the manufacturer of SPS has a certain reputation. In addition, SPS is the code name for some products.

- In addition, you can observe their waterproofing construction, first observe whether the paint is evenly brushed, and strengthen the treatment of the yin and yang corners. Then look at the thickness, and finally look at the effect after solidification and waterproofing, you can look at it, touch it with your hands, etc. 24-36 hours to test the water, can not wait for the tiling to test the water.

SPS has never heard of this paint. Miscellaneous brands.

JS or one-component polyurethane is used more.

Three points rely on the material and seven points rely on the construction, the construction is indeed very important, the regular waterproof coating is actually about the same, and the brand has little to do with it, different models of waterproof coating are suitable for different places, choose the most suitable for yourself is very critical! During construction, the first time must be very thin, as thin as possible, be patient, pay more attention to it, if you don't understand, you can find me! Everything.

I've seen the introduction, Chinalco Juneng, this SPS waterproof coating is actually a common JS on the market, upstairs is a bit of a layman, this is polymer.

Oh, that's good! I heard that this can also be used in sports venues, so if this is the case, students will be able to run healthy and worry-free, and support environmental protection!!

Wouldn't it be better to scare you out of polymers.

Summary. The main colors used in waterproof coatings are white, gray-black, etc. The specific color can still be adjusted.

If the color of polyurethane waterproof paint is black; The color of the one-component moisture-curing pure polyurethane waterproof coating is orange; The color of JS composite waterproof coating is white and so on.

The main colors used in waterproof coatings are white finch washing, gray black, etc. The specific color can still be adjusted. If there is a polyurethane waterproof coating, the color is black; The color of the one-component moisture-curing pure polysylurethane waterproof coating is orange; The color of JS composite waterproof coating is white and so on.

There are two categories of waterproof materials on the market: (1) one is polyurethane waterproof coatings. These materials are generally made of polyurethane and coal tar.

The tar gas it volatilizes is highly toxic and not easy to remove, so it was banned in China in 2000. The polyurethane waterproof coating still on sale is made of asphalt instead of coal tar as a raw material. However, when using this kind of coating, it is generally diluted with organic solvents such as toluene and xylene, so the grip beam also contains toxicity.

2) The other type is polymer cement-based waterproof coatings. It is composed of an emulsion synthesized from a variety of water-based polymers and high-quality cement mixed with various additives, and the flexibility of the polymer (resin) is combined with the rigidity of the cement, which makes it perform well in terms of impermeability and stability. Its advantages are convenient construction, low comprehensive cost, short construction period, and non-toxic and environmentally friendly.

As a result, polymer cementitious bases have become the protagonists of the waterproofing coatings market.

Dear, do you have any questions, if you have any, you can pay a return visit, thank you.