Soft ceramic viscose formulation Tile cement formulation

400 kg -70 mesh quartz sand: 350 kg -150 mesh quartz sand: 150 kg mesh heavy calcium powder:

100 kg Gelatin: 15-20 kg Total: 1015 kg-1020 kg Application 2:

350 kg -150 mesh quartz sand: 150 kg mesh heavy calcium powder: 100 kg gelatinous crystals:

5. Pu Silica cement: 400 kg -70 mesh quartz sand: 400 kg -150 mesh quartz sand:

150 kg Mesh heavy calcium powder: 50 kg Gelatinous crystals: 30-35 kg total:

1030 kg - 1035 kg Step 1: Dry the river sand taken from the local site until it is completely dry. Step 2:

The large particle size components in the river sand are removed by screening. The sun-dried sand is sifted into sand with a particle size of less than 20 mesh or more, using a sieve. Step 3:

Prepare silica cement, dried river sand and 2 gelatinous crystals at the construction site, and prepare the required adhesive mortar in accordance with the following proportions: Application 1: For the preparation of ceramic tile binder Ceramic tile adhesive above the drying sand:

600 kg5R ordinary Portland cement: 400 kg gelatinous crystal:

15-20 kg total: 1015 kg-1020 kg Application 2: used to prepare vitrified tile binder Mosaic binder The above sand is dried:

600 kg5R ordinary Portland cement: 400 kg gelatinous crystal:

20-25 kg total: 1020 kg-1025 kg Application three: used for the preparation of marble binder insulation board binder sand above the eye:

600 kg5R ordinary Portland cement: 400 kg gelatinous crystal:

30-35 kg total: 1030 kg - 1035 kg.

May I ask the senior brother on the side if he has a recipe for instant roast chicken. Reward!

Ceramic tiles are an indispensable part of our decoration, and its range of use is also very large, but when using ceramic tiles, it is necessary to use glue, under normal circumstances, tile adhesive needs to be deployed, but the method of deployment is different, thenTile mastic formulationWhat are they? What are the tips for using tile cement? Let's introduce it to you.

1. Tile cement formula.

400 kg -70 mesh heavy calcium powder: 350 kg -150 mesh quartz sand: 150 kg net heavy calcium powder:

100 kg Colloidal crystals: 15-20 kg Total: 1015 kg - 1020 kg.

Strong solid tile adhesive, suitable for ceramic tiles and gypsum on concrete foundation, proportion: cement 30kg, sand 65kg, tile adhesive substrate 1kg, water 23kg.

250 kg -70 mesh quartz sand: 350 kg -150 mesh quartz sand: 150 kg net heavy calcium powder:

100 kg Gelatin: 20-25 kg Total: 1020 kg - 1025 kg.

Strong tile adhesive, suitable for exterior wall renovation, excellent waterproofing function, special board sticker, ratio: cement 30kg, sand 65kg, tile adhesive substrate 2kg, water 23kg.

Second, the use of tile mastic.

1.Use a toothed scraper to apply glue to the work surface so that it is evenly distributed. Apply about 1 square meter at a time, then press down on the tile.

After pasting the tiles, they can be moved and corrected within 5-15 minutes. If a tile or stone with a deep back groove is pasted, the paste should be applied to the back of the tile or the back of the stone in addition to the work surface. The adhesive should be used up within 5-6 hours.

when it's around 20 degrees).

2.Use a power mixer to mix tile adhesive and water with:1 (25kg bag, approx. water) to form a homogeneous, powder-free paste.

Let the glue sit for 10 minutes and stir. Strength. The construction wall should be damp (dry on the outside) and maintain a certain flatness.

uneven or extremely rough parts should be leveled with cement mortar and other materials; The base layer must be cleaned, oily, and waxy so as not to affect adhesion; After pasting the tiles, they can be moved and corrected within 5-15 minutes.

3.After 24 hours of paving, you can step in or fill the joints. Dosage:

Depending on the sizing degree of the wall and the toothed scraper, it is generally kilograms per square meter. In addition to the work surface, a tile or stone with a deep back groove should be applied on the back of the brick or the back of the stone. Use glue and water to approximately:

Stir the mixture in a ratio of 1 (25kg bag and about water) until it is still paste. Let it sit for 10 minutes, stir again and put it off.

4.It is recommended to leave at least a gap between bricks and bricks. It is recommended to fill the joints with PSN anti-mold caulk. Use a toothed scraper to evenly apply glue to the work surface, about 1 square meter at a time, and press the tile (without water-immersed bricks).

Ceramic tiles will be used in house decoration, but there are many types of tiles, so what are the recipes and tips for using ceramic tile mastic, everyone knows through the above introduction.

Tile cement is a kind of mastic material that is commonly used for bonding when laying tiles. Its formulation raw materials include cement, gypsum, physical sand and chemical additives. These raw materials are mixed and processed according to a certain proportion, and finally form a cement with a certain adhesion and plasticity.

Cement is one of the most important raw materials in the production process. As the main ingredient of tile mastic, cement can be mixed with other raw materials to form a strong and sticky substance that is used for laying tiles or various other similar uses.

In addition to cement, gypsum and sand are also important components in tile mastic formulations. Gypsum can improve the ductility of the cement, while sand can increase its firmness.

In addition to these basic raw materials, tile cement also includes some chemical additives, such as modifiers, water repellents and hormones. These additives increase the durability of tile mastic, as well as improve its appearance and ease of use.

In general, the raw materials of tile cement formula mainly include cement, gypsum, sand and chemical additives. The proportions of these raw materials may vary slightly from the way they are processed, but they are basically used to make strong, durable, and sticky tile mastices. <>

Core Formula: (Unit: kg).

The name of the ingredient. Recipe 1.

Polyvinyl chloride (PVC) resin 15 dizinc ester 20 calcium carbonate 15 plasticizer toner moisture and impurities trace amounts.

Recipe two. Polyvinyl chloride (PVC) resin 40 dizinc lipid 55 calcium carbonate 35 plasticizer toner moisture and impurities in trace amounts.

Recipe three. Polyvinyl chloride (PVC) resin 28 dizinc lipid 36 carbonated socks source calcium 25 plasticizer toner moisture and impurities trace amounts.

Raw material description: 1) The plasticizer is diethylene glycol dibenzoate.

2) Polyvinyl chloride resin is polyvinyl chloride paste resin.

3) The plasticizer is dioctyl is a typical excellent cold-resistant plasticizer of polyvinyl chloride, with high plasticization efficiency and small discoloration by heating, which can endow the product with excellent low-temperature softness and light resistance, and has a certain water resistance. It shows good lubricity during processing, and the hand feel of the product is good, and it is often used with phthalate esters for cold-resistant agricultural films, cable coatings, artificial leather, outdoor water pipes and frozen food packaging films. It can also be used as a low-temperature plasticizer for a variety of synthetic rubbers and a cold-resistant plasticizer for resins such as nitrocellulose, ethyl cellulose, polystyrene, and vinyl chloride cobalance code polymers.

Ceramic tile is one of the indispensable parts of our decoration, and its use area is larger, so we have been paying attention to it has been very high, we all know that ceramic tiles are inseparable from the paste of tile adhesive, so what do you know about the tile cement formula? You don't know much about it, do you? Let's take a lookTile mastic formulationWhat is it and how to use tile mastic!

1. Force-solid tile adhesive, suitable for ceramic tiles and stone pasting on the concrete base, the ratio is: cement 30kg, sand 65kg, tile glue base 1kg, water 23kg.

2. Strong tile adhesive, suitable for exterior wall renovation, superior waterproof function, pasting of special plates, proportion: cement 30kg, sand 65kg, tile adhesive base 2kg, water 23kg.

350 kg -150 mesh quartz sand: 150 kg mesh heavy calcium powder: 100 kg gelatinous crystals:

15-20 kg total: 1015 kg - 1020 kg.

350 kg -150 mesh quartz sand: 150 kg mesh heavy calcium powder: 100 kg gelatinous crystals:

20-25 kg total: 1020 kg - 1025 kg.

How to use tile cement.

1. Press the tile glue and water according to: 1 (25kg bag, about kilogram of water) with an electric mixer to stir into a uniform, powder-free paste paste, and then stir it after the glue stands for ten minutes to increase the strength. The construction wall should be moist (wet on the outside and dry on the inside), and maintain a certain degree of flatness, and the uneven or extremely rough parts should be leveled with cement mortar and other materials; The base layer must be cleared of floating ash, oil stains, and wax, so as not to affect the adhesion; After pasting the tiles, you can move the correction within 5 to 15 minutes.

2. Use a toothed scraper to wipe the glue on the working surface to make it evenly distributed, and wipe about 1 or so each time, and then knead and press the tile. After pasting the tiles, it can be moved and corrected within 5 to 15 minutes of the Zen imitation clock.

3. If the tile or stone with a deep groove on the back is pasted, in addition to the plastering of the working surface, the back of the tile or the back of the stone should also be plastered, and the adhesive after stirring should be used up within 5 or 6 hours (when the temperature is about 20 degrees).

The quality of ceramic tiles also has a lot to do with tile mastic, so you should pay more attention when using them. The above is the tile mastic formula introduced to you today, what is the opening file and the use of tile mastic, and this is the end of it.

Nowadays, there are many types of decoration materials, and many of us don't know that decoration materials cannot be selected when we buy. There are many materials for tiling, among which tile cement is one of them, because many people dare not try it because we don't know it. So do you know the formula of tile mastic?

And how to use tile mastic!

5 Pu Silica cement: 400 kg.

70 mesh heavy calcium powder: 350 kg.

150 mesh quartz sand: 150 kg.

Calcium powder: 100 kg.

Gulls: 15-20 kg.

Total: 1015 kg - 1020 kg.

5 Pu Silica cement: 250 kg.

70 mesh stone sand sand of the canon: 350 kg.

150 mesh quartz sand: 150 kg.

Calcium powder: 100 kg.

Gelatinous crystals: 20-25 kg.

Total: 1020 kg - 1025 kg.

How about mastic tiles?

The effect of mastic tiles is very good, it has the following advantages:

1. High bonding strength, good flexibility, excellent water retention performance, thin adhesive layer, less dosage, no hollowing, no need to soak bricks and wet walls, improve efficacy, convenient and fast.

2. Excellent anti-falling, no falling phenomenon when pasting, excellent anti-aging, weather resistance, impermeability and waterproofness, can be used for tile paste in cold areas and freezers.

3. Mixed with additives, tiles can be pasted on the tiles. It does not contain any toxic additives in it, which is environmentally friendly.

How to use tile cement.

1. Stir evenly with viscose cement and water according to about: 1 (25kg bag of about kilogram of water) until it is paste-like, and stir again after standing for 10 minutes before it can be put into use.

2. Use a toothed scraper to evenly apply the glue on the working surface, about 1m2 each time, and then knead the tile (no need to soak the brick wall with water) on it.

3. In addition to plastering on the working surface, the tiles or stones with deep grooves on the back should also be plastered on the back of the brick or the back of the stone.

4. At least leave a gap between the bricks and bricks, and it is recommended to use PSN anti-mildew caulk to fill the joint.

5. 24 hours after the brick laying is completed, you can step in and bury or fill the joint. Dosage: depending on the slurry resistance of the wall and the tooth scraper, it generally takes kilograms per square meter.

For tile mastic, there are actually a lot of wrong decoration materials, but we need to learn how to match them when using them. The above is the formula of tile cement and the use of tile cement introduced to you today, and this is the end of it.