What should I do if I forget my wireless router username and password?

One. Retrieve with the ability to remember passwords.

Connect to your computer via wifi. You will say that the password of the wireless router has been forgotten, and how to connect to wifi, in fact, it needs to be popularized here. The password of the wireless router is not the same as the password of the wifi, the password of the wireless router is used for the management and setting of the wireless router, and the password of the wifi is used to log in to the wifi provided by the wireless router.

Connect your wireless router via wire. When the network cable is connected to the external network, insert the blue hole, and insert the network cable connected to the computer into any yellow hole.

Enter it in the browser and press the Enter key to open the management interface of the wireless router. If the interface shows the following picture, then it means that you have saved the password when you logged in last time, although you have forgotten it, but the browser has helped you remember, as long as you click the login button, you may be able to log in.

end two. Retrieve it by other means.

Turn the wireless router over and see if there is a piece of paper as shown in the picture. If you haven't tried this password before, then enter this and password to see if you can log in.

If none of the above methods can log in to the management interface of the wireless router, then you can only restore the wireless router to factory settings. The sum password after the factory reset is the factory set and password, which is the words prompted by the label on the wireless router as shown in the picture above.

Find a round hole on the front or back panel of the router that is labeled Reset, which is the reset key for the router to factory reset. In the power-on state, press the reset button with a pointed object for 5 seconds, and then you will see the sys indicator in the front row of the router change from a slow flashing state to a fast flashing state, then release the reset button, and then you can restore the factory settings.

In fact, factory reset is very simple, use a pointed object to insert into the router reset hole, it is recommended that you use a ballpoint pen tip, or a thin and hard wire and toothpick. After resetting the factory settings, you can log in to the router with the default router login username and password, which is generally the label and password written on the router, that is, admin, and the password admin.

end.

If you think this article is helpful to you, then click the share button in the lower right corner to share the article to your QQ space, Weibo, WeChat or Renren, so that more friends can see this article and help more friends solve their problems in life.

Resetting the router can be done by following the instructions.

1. If you forget your username and password, you must first restore the wireless router to its factory state.

After restoring to the factory state, reconfigure the wireless router, including resetting the username and password.

Second, the router to restore to the factory state:

When the device is running with power, gently press and hold the reset button on the router with a toothpick for more than 10 seconds, and then release this button, the device can be restored to factory configuration and automatically rebooted.

3. After resetting the factory settings, reconfigure the router as follows:

1. One end of the network cable is connected to the WAN port of the router, and the other end is connected to the LAN port of the cat;

2. Open the browser, enter the IP address of the router), enter the router account and password (see the label or manual on the router box);

3. Click Next;

4. Select PPPOE (ADSL Virtual Dialing) in the Internet mode, and click Next;

5. Enter the broadband account provided by the broadband operator in the Internet account and the broadband password in the Internet password;

6. Set the wireless network name in the SSID, select the WPA-PSK WPA2-PSK encryption method, and set the wireless password of no less than 8 digits in the PSK password;

7. Click Restart, and the router is set successfully.

4. If you want to change the router username and password, follow the following methods:

1. Open the browser, enter the IP address of the router), enter the router account and password (see the label or manual on the router box);

2. System tools - choose to modify the login password;

3. Fill in the information according to the actual situation and save it;

If the router needs to be restarted, the system will prompt you to press the restart button as prompted.

Find the reset button on the router, long press until the router restarts, the default user and password are admin

Answer: What should I do if I change the password of the wireless router at home and forget the username and password, I can only reset the router by resetting the login password, use the original login password or set the login password to log in to the router background, the reset steps are described below;

1. Each router has a reset button, generally next to the power hole, some are convex and some are concave, as shown in the figure, if it is convex after finding, it can be pressed directly, if it is concave, you can use a toothpick and other objects to press, generally press and hold the reset button for about ten seconds, and the router will be reset.

2. After the router is reset, the login password will become the original login password, which is generally admin, and the specific login password can refer to the label or manual on the back of the router and then set the parameters of the router.

This is very simple, do you see that there is a button behind the route, you just need to press and hold that key, and then see that the lights of the route are all on when it has been restored, and your new login route is the initial user and password.

What to do if you forget your wifi password, teach you a trick to easily retrieve it.

The steps to reset the router are as follows:

1. Press the "reset" button directly on the router, the reset key is generally located behind the router, a recessed button, you need to press and hold the button with a slender thing (such as a toothpick, etc.) for tens of seconds, then the router can be reset. The equipment of each manufacturer is not the same, generally press and hold for a few seconds, and then turn on after the front lights are all out, that is, the reset is successful.

2. If the router needs to be reset before it can be used, the setup steps are as follows:

1.First connect the line, you can refer to the figure below.

2.After the line is connected, open a browser, enter the management address and management password of the router, and then enter the router background (the login address and login password of the specific router can refer to the manual or the label on the back of the router).

3.Once you've logged in to your back-office, select Quick Settings, then click Next.

4.Choose the Internet mode, usually ADSL users choose the first PPPoE, and click Next after selection;

5.Enter the password applied for from the network service provider, and go directly to the next step after entering.

6.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Forgetting the router gateway password can only be solved by resetting the router.

Reset Wireless Router Steps:

1.Find a toothpick or a small needle or pen tip.

2.Press and hold the reset button on the back of the wireless router through the small pin, and release the small pin when the router signal light is fully on.

3.The router has been reset.

Reset the Router Gateway Administrator Password:

2.Open the computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the router account password, and the nameplate on the back of the router is usually written.)

<>3.Go to the gateway configuration page.

4.Go to the password change page in System Tools. to set the gateway administrator password.

The default username and password of all wireless routers is admin, if you have changed it yourself and forgot the username or password, you can use a toothpick to insert the smallest button for about 5-10 seconds to restore the router to the original factory settings, so that you can log in to the settings again with the admin username and password.

With power on, find the router behind "reset.""Reset key.

Hold it with a toothpick or something for more than 5 seconds until all the lights flash together and then release it, and the router will be factory reset.

And the password router should be available in the back, just reconfigure it yourself.

There is a small hole marked reset, press it in with a toothpick or other thin object, and hold it for about 5 seconds to restore the router to factory settings.

The easiest way to do this is to press reset on the back of the router, and after reset, it will be the default.

There is a button to reset, and there is a button where the routing plug is placed.

Turn on your own broadband connection, and that place has the username.

If you forget your router login username and password, you can retrieve it by resetting the factory settings.

1. When the router is powered on, hold the reset hole or button for about 10 seconds, and wait for the indicator lights on the router to turn off and turn on again, and the router will be restored to factory mode successfully.

2. The computer connects the router through the network cable, and uses the default IP address of the router and the default login username and password to log in to enter the router background, and the default IP and user name and password can be queried through the parameter values on the back of the router.

Note: After the router is factory reset, you need to reset the Internet parameters to have a normal Internet experience.

If it's your own, just change it.

Connect your computer to any LAN port of the router, enter the settings page, and change the WiFi name (SSID) and password of the router.

The method is as follows: 1. Open the browser and enter the IP address of the router gateway in the address bar (there is a label on the back of the router, generally, enter the login username and password (generally admin);

2. After successful login, the running status will be displayed, click "Wireless Settings";

3. Click "Wireless Security Settings" again, and the wireless network name (SSID) is a name, which can be filled in casually, generally letters + numbers;

4. Then set the password, generally choose the WPA-PSK WPA2-PSK encryption method (the password should be 8-16, and the alphanumeric combination can be used);

5. After setting the password, click Save to prompt restart;

6. Click "Restart Router" in "System Tools" to restart the router.