Install Deep Mountain Red Leaves Toolbox V28 to a USB flash drive?

In fact, you have already done a lot of preparation.

In this way, it is possible to make a USB flash drive version of the PE system

Convert the menu and programs folders in the Fukayama Momiji Toolbox and the Fukayama Momiji System Toolbox. exe into the root directory of the U disk, will be tested into the boot directory of the U disk,

Recommend the super first aid disk USB disk version, with it, you can put it into the U disk.

The BIOS is set to boot from the USB flash drive on it.

2. After plugging in the made USB flash drive boot disk, the software will automatically identify and select the currently inserted USB flash drive. First, select the USB flash drive you want to make through the [Select Disk] drop-down list, and then click the [One-click Production] button to start the production of the USB flash drive boot disk.

3. During the production process, other buttons of the software will become gray and unavailable. At the same time, at the bottom of the screen, the progress of the production will be displayed in real time. This process lasts about 1-2 minutes, depending on the individual's USB flash drive read and write speed.

After the production is completed, the software will prompt that the production is successful.

The first step is to make a boot USB stick with WindowsPE that can boot the computer. ­1.Double-click to open, the window appears, four options appear, choose 4, press Enter, type the drive letter of the U disk, such as J:

Be sure to lose right. Come to the formatting step, according to the default settings, click "Start" to format smoothly, press enter to the boot part, here to explain, there are two options in the "device", one is the hard disk of the computer, and the other is the USB flash drive to be made. Here you must choose the right USB flash drive and don't choose the wrong hard disk, you can distinguish which is the USB flash drive from the size.

My USB flash drive is a 2G Kingston, so I should choose (HD1) [1898M]. The "Options" section below can be left alone, as long as no parameters are checked by default. After confirming the above steps, click "Install" and proceed to the next step.

ok ­

Don't be so troublesome,U disk to do the boot disk,First**a U disk boot disk production software,I use [computer store U disk startup disk production tool],After installation, click "one-click to make a U disk start",You can use it to start after successful production,There is PE,There are also DOS tools,Partition tools,And it is installed in the hidden partition of the U disk,Anti-virus and anti-formatting,PE inner tools are also quite complete,It also supports the boot interface、PE interface personalized modification,Very powerful, Hope it helps, hehe.

Do you want to use it to maintain the system?

You can also use other DOS tools, which I use now.

You just start the one inside to install the PE program, which should have the option to install it to a USB flash drive.

There are a lot of simplified emergency software that can be used in the system in the deep mountain red leaves. But I also recommend engraving it into a disc and using the Chinese family, because Momiji supports hard disk boot to decipher the system password or something.

Supplement: Unless you get a USB flash drive to guide, but then you can't put anything else on your USB flash drive.

1.Can be burned to a disc (this is also the best way to be stable!). ）

2.Install to a local hard disk.

3.Install it on the U-Activate portable hard drive.

3. Mass production of the deep mountain red leaf PE toolbox into the U disk!

4. That's it!