-
Anonymous users2024-02-10Install Windows XP first, then Linux, Ruguo If the boot grud and partition magic may conflict, follow this method:
Put the first sheet of the installation disk into the CD-ROM drive, then restart the machine and boot the system with the CD-ROM drive in BOIS.
When the installation screen comes out, press the F4 key, which is the Linux rescue mode.
A series of keyboards and a few simple configurations, and then on... This process, I won't talk about it, it's relatively simple.
Then such characters will appear.
sh#sh#grub
Such characters will appear.
grub>
We can just type after such a character.
grub>root (hdx,y)
grub>setup (hd0)
If successful, there will be a successful....
Please note that there is a space between root and (hdx,y), where x, if it is a disk, it is 0, if the root partition of the Linux you are installing is on the second hard disk, then x is 1; y is the root partition where the Linux system is located. Setup (HD0) is to write grub to the MBR of the hard disk.
X here is generally 0, as for what y is, if your root partition is installed on HDA8, then Y is 7, and so on, if you don't know what partition it is installed in, you can also press the tab key to make it up.
-
Anonymous users2024-02-09Reinstall the Linux boot grub or lilo, and then go to the boot grub in the Linux folder to modify the boot menu.
-
Anonymous users2024-02-08The XP system itself is an operating system, and you don't need to find it, if there is a problem with the system, please use the XP installation CD to boot and reinstall the operating system.
1. Insert the system disk (CD-ROM or U disk) into the computer.
2. Restart the computer, enter the BIOS, and set the system disk as the preferred boot device in the BIOS.
The BIOS settings are different for different motherboards, please refer to the manual of the motherboard to set them up.
3. After restarting, the system starts to boot from the system disk, and after booting, it is installed normally.
4. Complete the system installation according to the prompts of the installation program.
-
Anonymous users2024-02-07It's not easy to find a clean XP system now, and I saw that you were looking for it, so I took out the version I had collected before and uploaded it and shared it with you;
Windows XP SP3 Pure 201507
win7 go down to right-click on my computer to manage disk management right-click the drive letter you think is too large compress volume and then partition the compressed space. Win7 is more complicated to install XP, you first use XP's CD to boot the system, and then manually run Ghost32, clone the GHO file to the specified drive letter, restart to see if there is a problem with the startup item, if there is a problem can be repaired, after entering the XP system, a software repairs the startup item. The shortcut keys are more troublesome, and you can only count on the system's built-in driver to be useful. >>>More
Start --> run --> enter regedit and press enter --> open hkey local machine -->software -->microsoft --> windows nt-->currentversion -->winlogon-->specialaccounts-->In the userlist table, see if there is a project called administrator on the right, if there is, right-click to modify, change its value to 1, if there is no administrator this project, just right-click to add a [dword] value, the numeric name is administrator, the numeric data is 1, just restart.
Click Start, command, enter msconfig, enter the startup project, cancel all the startup projects inside, and leave ctfmon here.
1. Preparation before installation.
1 Debug the Windows XP system and make a backup to prevent the system from crashing due to operation errors. >>>More
Press Ctrl+Alt+Del when entering the system to enter the password, and log in as a super administrator. and the administrator password is empty. Or the password you set when you installed the machine, and then the next Dwarf DOS management tool. >>>More