What should I do if my computer keeps being pure blue? Everything on the computer screen turned blue

If the computer has been pure blue, it is recommended to change the wallpaper first, and then replace the cable to try, if it is still like this, then replace the monitor and graphics card, if these have been replaced or blue, then it may be a memory and motherboard problem.

There is a pure blue interface, whether there is a **, or whether the screen shows other English letters. Or is it just that the screen color is pure blue?

1. If the computer is pure blue, there may be a problem with the computer screen or screen cable.

2. If there is an English letter, it is normal that there is a problem with the computer system, and you need to install the system again.

In this case, if the blue screen of the computer cannot be turned on normally, then it is to reinstall the system to solve it completely, if the image is blue, then check whether the graphics card driver, or the monitor is normal.

If your computer stays pure blue, it is the Blue Screen of Death, and you can reboot into safe mode to undo the latest changes to the system.

Take the console to find another computer monitor, and connect it to see if it is a problem with the computer's graphics card or a problem with the monitor.

You can ask a neighbor or someone you know, as well as a nearby computer store, to help them try it, check out the faults, and replace them.

If it can be turned on normally,It is recommended that you change the data cable of the display to test it first,If not,You can only detect the problem of the graphics card and the display。

Pure blue? Can you take a ** look? Maybe you're talking about the so-called blue screen. It should be caused by the system crash. It is also not excluded that some hardware damage is caused, such as memory modules.

1.The monitor line is in poor contact and re-plugged.

2.The display driver block is damaged. Try changing the monitor.

3.The computer's graphics card is damaged.

It may be that the computer has too much dust and causes a black screen, you can use an eraser to wipe it, and then use a soft brush to clean the dust of the internal slots of the computer.

Press f8 to select the last correct configuration, you can't redo the system, you can't take off the memory and rub the gold finger with an eraser.

If the blue screen doesn't affect the use, you can set the background and take a look! If you can't use it, take a screenshot of the blue screen**!

It may be caused by the table management software not working properly. At the same time, press the ductrl+alt+del key combination to enter the task manager interface, click on the new DAO service, fill in the input field: , and then click confirm or press the enter key directly, and you should be able to come out of the desktop. Give it a try.

Hello, there are generally the following reasons for the computer screen to turn blue: 1. The screen line of the monitor is not in good contact. Re-insert it, but don't try to change it.

2. The display driver block is damaged. Try changing the monitor. 3. The computer graphics card is damaged.

Try it out with a discrete graphics card. 4. If the blue tone of the primary color of display 3 is too strong or the display is magnetic, reset or degauss the display.

When the computer is in use, the blue screen suddenly appears, and at this time, the first thing we think of is that there is a problem with the operating system. However, there may be many reasons why your computer has a blue screen, so let's analyze the possible causes and solutions one by one.

1.Hardware failure.

The most common cause of a blue screen is a hardware failure. For example, CPU heatsink dust accumulation leads to overheating, memory module failure, hard drive bad sectors, and more. When the computer notices a problem with the hardware, it automatically stops working to prevent further damage.

At this point, it is advisable to shut down, unplug the power, check the hardware and repair or replace the faulty parts.

2.Driver issues.

The driver is a critical part of connecting the hardware and the operating system, and if the driver is wrong or incompatible, it will cause the system to have a blue screen. Using System Restore or updating the latest version of the driver can resolve the issue.

3.System file corruption.

The system files in the Windows operating system play a very important role, once the system files are corrupted, it will also lead to the blue wave Xiangtong screen, at this time, you can use the system restore, repair tool or reinstall the system to solve the problem.

4.Viral infections.

Viruses and malware can also cause the system to have a blue screen, at which point use software to scan the entire system.

In general, different situations should be analyzed separately to find solutions. In addition, we can also take the following measures to prevent blue screens on our computer:

1.Regularly clean up dust and debris inside and outside your computer.

2.Do not change the system settings arbitrarily to avoid causing malfunctions.

3.Back up your important data regularly to avoid data loss due to misoperation or system crashes.

4.Regularly update your virus database and scan your computer regularly with software.

In conclusion, the BSOD issue can be caused by a variety of causes, and the solutions vary. We need to make specific analysis, gradually eliminate faults, and strengthen the maintenance and maintenance of the computer to ensure the long-term stable operation of the computer.

Summary. Hello dear, it is generally a problem of interface and inferior wire. The solution, turn the VGA cable, that is, the ** line, around, and many times the problem of discoloration of the computer screen will be solved.

Second, the graphics card is aging, and the integrated graphics card is likely to have this kind of computer screen discoloration, and the screen is either only purple or blue. Third, the transistor on the display motherboard is in poor contact, and the problem of discoloration of the computer screen can be solved by soldering.

What to do if your computer screen turns blue.

The colors can't be adjusted.

Hello dear, it is generally a problem of interface and inferior wire. The solution, turn the VGA line, that is, the ** line, around, and many times the problem of screen discoloration on the computer debate is solved.

Second, the graphics card is aging, and the integrated graphics card is likely to have this kind of computer screen discoloration, and the screen is either only purple or blue. Third, the pure vertical contact of the transistor on the display motherboard is poor, and the problem of discoloration of the computer screen can be solved by soldering, and it is not much money to repair this situation.