The Wi Fi shows that it is not connected, but it is able to access the Internet, and it often drops

I just solved this problem on my machine and share it with the landlord.

1.Network Neighbor Attributes - Wireless Network Properties - Wireless Network Configuration.

Tap the box before "Configure my wireless network settings with Windows" and set the key you want to connect to the network. Determine if it's a WAP or what type, then enter the key, click OK, and the icon will show the connection! Often, everyone only does this step (but it doesn't end, if you don't take the next step, it will become unconnected after 2 or 3 minutes, but you can still connect to the Internet, and after a while it will be completely disconnected).

2.Now, enter the network neighbor properties - wireless network properties - wireless network configuration, cancel the check box before "configure my wireless network settings with windows", and then it should be fine, if there is still a problem, it only means that the previous link is not set correctly (such as the key setting 1 2 3 and so on).

I haven't figured out what the specific theory is.,But it does solve the problem.,That's OK.,Hehe.,I hope the landlord can solve the problem.,I don't agree with reinstalling the drive casually.,That's not to solve the problem.,That's to escape.。

There are two reasons for this.

1: After the route is reset, the setting is incomplete. You can try the following methods: 1. Press the small hole of the router to reset the factory settings, re-set the route, and then fill in the dial-up and password correctly.

and turn on the wireless routing option. Open the dehp option and find that the router's connection option is "Automatically connect when you need to connect to the network".

2: Please uninstall your wireless card driver and reinstall the driver. Settle.

Why don't you set it up again! Can you give it a try?

Connect to the Internet cable in the IE input.

Then fill in the login account admin password is also admin, enter the router settings and look for it inside, find an item "factory reset", click, and then the router will automatically restart.

Then follow the above method to enter the router settings, select the setup wizard, and fill in the Internet account and password again. Problem solving.

Good luck!!!

The satisfactory answer can only solve the problem temporarily, not the root cause, I don't believe you, check your machine's "Start IEEE verification of this network", remove this check, and all the problems will be solved.

Open Network Neighbor - View Network Connection - Wireless - Properties - Wireless Network Configuration - Advanced - Verification.

Remove the "Start IEEE Verification for this Network" ditch inside.

The IEEE standard defines port-based network access control that can be used to provide authenticated network access to Ethernet networks. Port-based network access control uses the physical characteristics of the switched LAN infrastructure to authenticate devices connected to switch ports. If the authentication process fails, the ability to use the Ethernet switch port to send and receive frames is denied.

There are other unpasswordd networks in your area. The computer is automatically connected to someone else's network.

What is the reason why the mobile phone wifi connection is not available?

This is the most common problem, it may just be a temporary connection into a loop, the easiest solution is to unplug the router power interface, let the router restart, this can solve 90% of the problems caused by the router. Of course, it is also possible that the router has a hardware failure, which can only be sent for repair. Now the router** is not expensive before 50-200 yuan.

Generally, this kind of problem occurs in the work environment, or in public places such as cafes and shopping malls that provide free Wi-Fi. If you don't have the permission to change the settings of your router, you can only try to avoid surfing the Internet during peak hours, or connect to the Internet in advance. If there is an IP conflict, it is necessary to assign IP to each connected device in the router to avoid affecting each other.

The mobile phone receives the wifi signal by relying on the wireless network card in the mobile phone. Some mobile phone wireless network cards have been eliminated or seriously aged, which will cause poor wifi signal reception, and even a ** call will lead to the wireless network disconnection, which can only be repaired by the maintenance center.

The baseband is the module responsible for communication, and often a mobile phone has multiple basebands to choose from. If you brush an inappropriate baseband when you are flashing the ROM, it may cause your wifi connection to be abnormal, and even the text message cannot be sent, and the ** cannot be sent. In addition, if the ROM itself is not perfect, then there will also be the problem of an abnormal WiFi connection.

For example, as soon as Android was released, some friends brushed the beta version of CM10 (framework-based third-party ROM), and the result was unable to connect to WiFi, which had to be solved by re-flashing a more complete ROM.

Hello, if you are still satisfied with my reply, I hope you will take the time to give a thumbs up Here, I wish you a smooth work, good health, and all the best

1. The quality of some wireless routers and optical modems (broadband cats) is relatively poor, and a series of problems such as crashes will occur after long-term operation. Solution: Turn off the power of your home wireless router and optical modem (broadband modem), wait for a few minutes, and then turn on the power and start the device.

After the normal start, connect to the wifi to test whether it can be used normally.

2. If your home wifi suddenly has the problem of not being able to access the Internet. And the router and cat have been powered off and restarted, but it still can't be used after connecting to wifi. In this case, it is very likely that there is a problem with the broadband line, or the broadband is in arrears.

Solution: First of all, call the customer service of broadband** to check whether your broadband is in arrears, if it is in arrears, you can pay the fee. If there is no arrears, you can transfer to the manual customer service, report the fault, and let the operator arrange staff to provide door-to-door service.

At this time, if the computer can access the Internet in Dongzhou, it means that the broadband line is normal and there is no problem. On the contrary, if the router is not used and the computer is directly connected to the cat, the computer cannot access the Internet, and most likely there is a problem with the broadband line.

Check whether the network parameters are correct, you can also restart the router to try, and then check if there is any problem with the line.

There are many reasons for not being able to access the Internet suddenly, sometimes the network will be interrupted suddenly, you can check whether it is the reason for the router or computer or mobile phone, you can restart the router or computer to try, it is generally useful, if it is still useless, some of them will be disconnected when the time expires, it is recommended to call ** to ask the network installed at that time, thank you.

This is a problem with the front end of the router, including the wiring and settings.

First of all, check the problem on your side:

1. Use the computer to skip the router directly to surf the Internet.

If the computer can access the Internet normally, then go to the router to check the router settings, if there is no problem or can not access the Internet, then reset the router and restart the settings. There is also a check whether there is a problem with the network cable connecting the router to the outside line, and you can replace the network cable that can access the Internet normally, like the network cable that the computer just skipped over the router to surf the Internet.

2. If you can't access the Internet normally, then find the operator's customer service. If you dial wideband, remember that you can't dial**.