What should I do if the Gionee mobile phone 182 touch screen fails

1. The touch screen is not sensitive, it is recommended to go to Settings All Settings Accessibility Set [Touch and hold delay] to "Short", and clean up the phone's memory and background running software;

2. Occasional failure, it is recommended to clean up the phone's memory and background running software; Or back up important data and restore it to factory settings;

3. Completely out of order, it is recommended to try to press and hold the power button at the same time for about 15s to see if you can shut down and restart

1) If the machine cannot be shut down and restarted, it is recommended to bring the purchase invoice and warranty card to the after-sales service;

2) You can turn off and restart, but the touch screen still fails after restarting the phone, it is recommended to bring the purchase invoice and warranty card to the after-sales service;

3) You can turn off and restart, you can operate the mobile phone after restarting, if you still can't, it is recommended to bring the purchase invoice and warranty card to the after-sales service.

4. Confirm whether the mobile phone is affixed with a protective film, try to remove the protective film and try to operate again.

First try to turn off the phone and restart, you can operate the phone, if not, send it to the after-sales test, you can operate the backup data to restore the factory settings of the phone

It is recommended to go to Settings All Settings Accessibility Set [Touch and Hold Delay] to "Short", and at the same time clean up the phone's memory and run software in the background to try it.

Correct, if it can't be corrected, restart the phone, or restore the factory.

1. It is best to restart the phone, because in many cases, it is because the program runs too much, causing the screen to get stuck, as long as you turn off and restart it, you can generally use it.

2. If the screen drifts, if conditions permit, you can consider blowing the screen with a hot hair dryer that usually blows your hair, turn it on to the middle range, and blow the screen evenly when the phone is turned off.

3. If it is affected by the magnetic field, then stay away from the magnetic field or degaussing treatment, if it is the influence of static electricity sweat and oil, the human body may appear static sweat and oil stains under specific circumstances, and should be actively cleaned and protected. If it's frozen or faked, this problem can be solved by turning off the screen or restarting the phone.

4. If part of the click fails, then you can use the application software of one-click cleaning on the mobile phone to clean up the program, and then click on the place you want to click after cleaning the program, and you can generally use it.

If you can't troubleshoot the problem through the above, you will have to restore it to factory settings. First, use a PC suite to back up the contents on your phone. Before paying attention to the soft grid, take out the memory card first, otherwise it will be formatted together, and the contents of the card will be completely deleted.

If the situation persists, it is recommended to have it serviced by a professional.

Settings Advanced settings Accessibility Touch and hold delay See if the setting defaults to Short

It may be caused by insufficient memory on the phone, it is recommended that you can use Phone Manager to clean up the memory of the phone; For virtual buttons: If the virtual button fails to work occasionally, it is recommended to press the power button or touch the screen with your hands to rule out the cause of static electricity.

Solution: 1. Go to your phone's "Settings" "Advanced Settings" "Accessibility" "Touch and hold delay" to see if the setting is "Short" by default;

2. It may be caused by too many programs running in the background, quit some programs running in the background, shut down and restart;

3. It may be caused by insufficient memory on the phone, it is recommended that you can use Phone Manager to clean up the memory of the phone;

4. For virtual buttons: if the virtual buttons fail to work occasionally, it is recommended to press the switch button or touch the screen with your hands to rule out the cause of static electricity;

5. If it still can't be used, it is recommended to back up the important data of the mobile phone and restore the mobile phone to factory settings.

6. If the above operation methods still cannot be used after trying, it is recommended to bring the purchase invoice and warranty card to send the mobile phone to the nearest after-sales outlet for professional testing.

Exit some programs running in the background or restart the phone to solve the problem; Use System Manager to clean up with antivirus; If you still can't use the backup data, restore the factory settings.

Workaround:

1. Occasional malfunction:

2. Clean up background apps, such as: click the virtual key at the bottom left of the screen and click the circle below;

3. If the mobile phone has a tempered film, remove or replace other films;

4. Back up important data and restore factory settings.

Second, complete failure:

1. Press and hold the power button + volume up button for about 15s to restart the phone;

2. If the mobile phone can be restarted and operated, refer to the method of occasional failure to rule it out;

3. If the phone cannot be restarted, or it is still abnormal after restarting; Bring the purchase invoice and warranty card to send the mobile phone for after-sales processing.

This depends on the test report of the warranty unit, if the test report is not a man-made fault, it can be replaced free of charge, if it is artificial, it is charged, the general warranty is changed to the touch screen, **between 70-120, you can get it to the outside repair shop to replace, about 30 yuan to get it.

My Gionee phone touch screen is broken, and it can be bought at **.

You can do it according to the following methods:

If it is a software system failure, then restore the original factory settings or flash a simplified version of the system. As for the hardware, it can only be returned to the factory for repair.

The touch screen is not sensitive, it is recommended to go to Settings All Settings Advanced settings Accessibility Set [Touch and hold delay] to "Short", and clean up the phone's memory and running software in the background.

Occasional malfunction, it is recommended to clean up the phone's memory and background running software; Or back up important data and restore it to factory settings;

It is completely out of order, it is recommended to try to press and hold the power button + volume up button at the same time for about 15s to see if it can be turned off and restarted.

Check whether the phone has a protective film, try to remove the protective film and try again.

In the end, if the touch screen still fails, you can send the mobile phone to the local after-sales service, and the professional engineer will test and deal with it.

Generally, there are four wires for mobile phone touch.

Adjust the position of the four wires, generally adjust the fourth to the first.

The back 123 is connected in order.

Workaround:

1.Open your phone's [System Settings] [All Settings] [Factory Reset].

2.If this method does not work, then it is recommended that you [flash] (reinstall the phone system).

Hello, you can check it according to the following methods.

1. The touch screen is not sensitive, it is recommended to go to Settings All Settings Advanced Settings Accessibility Set [Touch and Hold Delay] to "Short", and clean up the phone's memory and background running software at the same time;

2. Occasional failure, it is recommended to clean up the phone's memory and background running software; Or back up important data and restore it to factory settings;

3. Completely out of order, it is recommended to try to press and hold the power button + volume up button at the same time for about 15s to see if you can turn off and restart:

4. Confirm whether the mobile phone is affixed with a protective film, try to remove the protective film and try to operate again.

It could be an issue with the phone screen.

I sometimes have a temporary touch screen that doesn't work, and I keep touching the return health or just hitting restart.

If the touch screen is unresponsive when your phone is operating, you can first tear off the protective film of your mobile phone, and then enter the "touch screen calibration" in the mobile phone (general operation steps: mobile phone settings - display settings - touch screen calibration - completed).

1. There are many reasons why the mobile phone screen is not flexible, sometimes it is not necessarily the problem of the mobile phone screen, but the mobile phone system card.

2. Select Cancel Magnification in the settings, try to see if there is any better, or you can touch the screen to improve the sensitivity of the mobile phone screen.

3. Format your phone. Phone system or hardware issues cannot be ruled out.

4. If it still doesn't work, it is estimated that the screen is broken due to improper use, so it is better to replace the screen and go to the maintenance point to replace it.

Expand how to take care of your phone's screen.

Clean regularly, do not use alcohol or cleaning liquid; Cleaning solution that can make moving laptops.

Do not put hard objects and your phone in one pocket to avoid scratching the phone screen.

Keep away from high temperatures, generally articles above 40° will cause the composition in the screen to be unstable. Such as fire source, sun exposure. Also avoid charging your phone when the voltage is unstable, so as not to cause damage to the phone screen.

If it doesn't work, just change the screen from Samsung Galaxy Note3 to create your own wonderful!

It may have fallen, or it could be a malfunction of the mobile phone screen, or it could be a quality problem!

Press and hold the power button for 15 seconds, force power off, and then restart.

It is recommended that you send it to your local after-sales service to test your phone.

You can find the nearest after-sales service outlet on Gionee's official website - > service - > after-sales service outlets, hoping to help you.