My house is more than 200 meters away from his house, how can I share broadband

The network cable is not allowed to exceed 100 meters, and it is best to buy 2 routers in the middle, but that is very stuck. It's better to install your own adsl, which is not expensive.

Buying a wireless router is a convenient solution to the problem of line laying. **Also inexpensive TP-Link TL-WR541G+

Wireless Router Data Transmission Rate: 54Mbps Frequency Range: Network Interface: 4 x 10 100M Adaptive RJ45 Terminals. It's only 170 yuan, which is very practical!

**Reference.

60 meters is not good, 100 meters is the limit, so you can't share it.

Router,,200 meters of network cable is OK, network cable is not very expensive.

Okay, but you'll have to buy a network cable.

The best way is to install a signal booster on a wireless router, which can increase the range of the wifi signal so that it can be separated by 250 meters and enjoy the wifi better.

Connect with optical fibers, use a pair of photoelectric converters, share one on each side, buy outdoor leather fiber for connectors, and the two have to buy a wireless bridge, and then set it up.

Optical fibers can be used for transmission, and the user can place a single fiber at each end, or set up a wireless bridge at both ends, but too many buildings in between the two methods will cause a bad signal.

The first is to add a router or switch to home A, pull an optical fiber from home A (optical fiber is not as expensive as you think) optical fiber can be hung empty or buried, with optical fiber transceiver, the network is basically lossless, and it is shared.

The second type is to use a wireless transmitter if there is no obstacle between A and B, and the power is much higher, so it can also be used.

If you want to share a broadband after more than 100 meters, you can only choose a wireless bridge or optical fiber networking, so as to prevent the transmission quality of network transmission from degrading, and better realize the long-distance transmission of network signals.

The long distance of the wireless bridge can meet the daily needs

Many families have a relatively short time to use the Internet, and the neighbors just have the network and think of sharing broadband, so that it can be convenient for temporary use, and there is no need to pull another optical fiber by themselves, and the two families share broadband together, which is really economical and convenient. But as the subject said,The distance of 250 meters apart has exceeded the transmission distance of ordinary network cables,Normally it should be within 100 meters,If it exceeds 100 meters, it will affect the transmission quality of the network cable,At this time, if you want to share broadband,You can only pass the following two methods。 The first to build a wireless bridge, if there is no obvious obstacle between the two buildings, then the cost of networking with a wireless bridge is the lowest.

The straight-line visual distance of the wireless bridge is 250 meters, and the directional antenna is used as a connection, the advantage of the wireless bridge is that the transmission distance is long, and some can even reach more than 5 kilometers, but when using the wireless bridge, try to use the 5G frequency band and dual channel, so that the transmission rate can be higher, which can meet the needs of ordinary home broadband.

The speed of the fiber optic transceiver is the same, but the cost is relatively high

In addition, you can also use optical fiber transceiver and optical fiber to share broadband optical fiber transmission network signal also has the advantage of long transmission distance, in addition to the transmission speed will be relatively fast, see the interference ability is relatively strong, if the long-distance transmission signal and there are obstacles, you can give priority to optical fiber transceiver.

It is only necessary to install optical fiber transceivers in two houses, and then install broadband houses, use network cables to connect optical fiber transceivers and routers, and houses that share broadband connect routers to optical fiber transceivers, so that optical fibers can be laid between the two houses and broadband can be shared. Generally speaking, if ordinary families want to achieve long-distance transmission or occasionally share network signals, it is recommended to consider wireless bridge transmission.

Make the right choice based on your individual needs

Although the optical fiber transmission network, the signal can get excellent network quality and speed, but the cost of maintenance is very high, and the difficulty of construction is also relatively large, if you want to invest so much in the early stage, it is better to install a broadband yourself.

Use a wireless bridge to transmit the network, the signal installation is relatively simple, and the cost is much lower, but it must be ensured that there are no obstacles between the bridges, because the wireless bridge is more susceptible to interference when transmitting network signals, and the speed and quality of transmission are naturally not as good as the networking, but the occasional use of ordinary families is still enough, and the specific choice of optical fiber or wireless bridge, it is best to make a decision according to your actual situation and budget.

Install a good router and put it in the center, so that both companies can use this broadband when they share the money equally.

Summary

The biggest problem with two companies sharing a broadband is the network signal attenuation caused by too long distance, within 100 meters, you can directly connect to the router to achieve common Internet access, and beyond this distance, you need to use "switches", "hubs", "network extenders" and other equipment to amplify the network signal.

Between 100 meters and 200 meters, you can use a switch or hub to extend the signal, because the switch can support long-distance signal amplification, there is no clear data description, Daming recommends the use of high-power "network extenders" to amplify the signal, up to 300 meters of distance.

The theoretical maximum transmission distance of twisted pair is only 100m, so it needs to be called a switch relay in the middle. It is better to use optical fiber directly, and it is more cost-effective to buy a pair of optical fiber transceivers than to pull network cables.

Method 1:1. Home (router) - 100 meters of network cable--- repeater--- network cable --- office (router).

2. The network speed effect is poor and the construction is troublesome.

Method 2:1. Home (router) -- network cable 1 meter --- photoelectric transceiver A --- optical fiber 200 meters --- photoelectric transceiver B --- network cable 1 meter --- office (router).

2. The operation is relatively simple, and the optical fiber should not be bent in the wiring.

Hello, yes, you can just drag the cable, you can drag the network cable at home a few hundred meters, and then you can connect the router over there, this is a method.

Theoretically, the network cable can only be pulled for 100 meters, and the signal attenuation is very large after more than 100 meters, which will affect the normal Internet access. If you really need to pull such a long network cable, you need to add a relay device in the middle of the network cable, and that's it.