Do you want to polish the color treasure bottom?

It should be sanded, otherwise it will be uneven.

The process flow of the color rubbing:

Solid color paint open process:

White billet - glue solid primer once - white primer 2 times - matte white (color) topcoat 2 times.

White paint Chinese process: MDF - scrape and apply white soil - spray glue solid primer once - white primer 2 times - matte white paint 2 times.

Solid color paint plane roller coating process:

White blank - glue-solid primer (roller coating) once - white primer (roller coating) 2 times - matte white (color) topcoat 2 times.

Note: The proportion of mechanical coating process products with water is relatively reduced or not mixed, and the primer and topcoat can be mixed with water no more than 20% according to construction habits; The actual effect requirements are different, the construction process requirements are different, and William paint can recommend the most suitable mechanical coating process according to customer needs.

Drying time (relative humidity 50%, temperature 25).

Construction precautions:

1. It must be stirred evenly first, and then batched for construction, so as not to wipe the uneven color, and the construction viscosity can be adjusted with a supporting thinner.

2. During construction, it is necessary to wipe hard, and rotate and wipe in the same direction (clockwise or counterclockwise) to ensure uniform color and wood grain.

Pure wood is suitable for polishing the paint process. Because of its natural wood texture that cannot be replicated artificially, each board has its own unique texture.

Longtu water-based wax wood dyeing Half an hour after construction, one hour of drying, three days after normal use, 7 days to reach all the test indicators, suitable for indoor and outdoor use.

Polishing lacquer Scientific name wax wood dyeing, also known as wood wax oil, is one of the most primitive solid wood dyeing open lacquer.

After rubbing, the wood has a clear natural wood grain, especially high-grade wood, the appearance is more realistic, the three-dimensional sense is strong, and the visual impact is very strong. It also protects your wood. Non-toxic and tasteless, very environmentally friendly, with a wide variety of colors, classical and solemn, and not fading.

It can also be waterproof, sunscreen, stain-resistant, scrub-resistant, and the construction is simple and easy to learn.

Adhesion When it comes to the construction of wood wax oil (wood wax oil), we must first understand the principle of wood wax oil adhesion to wood, and the finish after grinding and polishing looks smooth and flat, and when viewed under the microscope, it is evenly covered with honeycomb-like pores. The ingredients of Longtu water-based environmentally friendly wood wax oil are natural colored minerals and palm oil and other formulas, after mixing with water, it has strong permeability, acting on the inside of the wood in the process of rubbing, so that it can complete the dyeing at the same time, and also greatly extend the service life of the wood.

Construction Dust out of the surface. Fill the larger pores with wood filler of similar color to wood, and gently smooth it with sandpaper after drying to ensure that the finish is dust-free; Add 40%-50% pure water to dilute Longtu environmentally friendly wood wax oil (twice the coating rate of other domestic brands); Use a slightly damp sponge or non-flannel cloth to apply wood wax oil in a circular manner, evenly fill the holes of the wood, and quickly rub along the wood grain; Remove the excess paint with a dry cloth in time, and use a dry cloth to test the wood grain from one end to the other to achieve a smooth and uniform finishing effect; After half an hour of drying, apply a layer of water-based sealing primer, and gently polish it with fine sandpaper after drying (this step can also be ignored); Finally, apply a layer of water-based topcoat with a brush (fine bristle brush) or spray application. After drying, lightly polish with fine sandpaper and apply the topcoat again.

The topcoat can be applied in 2-3 coats.

The above is my practice process, and the entire process of wiping paint will be different due to the different processes of various brands of wood wax oil.

Brown coating of water-based wax wood staining swatch control.