-
First of all, it should be explained that the TV configuration is backward,After deleting the boot screen,There will be no change in the fluency of the system,The main reasons are the following two aspects:The first is the fluency of the system,Fundamentally determined by the TV hardware,The boot screen is just one**,a**The loading speed is very fast,Even if you delete this**,The boot speed is basically not felt,After the boot screen is completed,This picture has nothing to do with him,You feel that the TV is not running smoothly, The root cause is the aging of TV components and the degradation of performance; The second is related to system optimization,Generally buy big brand TVs,The system at the time of delivery should be the best with hardware optimization,After all, a team of thousands of people does one thing,It will definitely make the software and hardware balanced and extreme,Don't believe in the ROM of personal flashing,That's all,How powerful can a person's level be,Experience can surpass the manufacturer,Impossible。 I'll give you two more tips:
First, if the TV picture quality is okay,Just go directly to a box,Don't fix other useless things,Set the box as a boot system,It's easy to use,The cost is low; Second, when you bought a TV, it was very expensive, and you were reluctant to change it, telling you to buy new electronic products or not old ones, change it, and now TV is much cheaper than other electronic devices. That's what I'm giving you a little bit of advice, and I hope it can help you.
-
It may be because of the setting of the screensaver, and the setting pops up within a few minutes.
-
1. If you use a composite ** cable to connect the digital TV set-top box, it may be that the yellow cable is not in good contact. 2. If there is no flash on the screen at the moment of shutdown, and there is a slight discharge sound, it can be identified as a problem caused by the failure of the picture tube. 3. The CPU chip fails, resulting in the loss of brightness control and the loss of image.
The solution to the TV screen with an image that disappears in 1 minute1、First of all, check whether the connection cable between the TV and the set-top box is damaged。 If the cable is damaged, try replacing it with a new one. If the TV returns to normal after the cable is replaced, then the fault is solved.
2. After replacing the connecting wire, the fault still exists. We need to check the problem of the set-top box, unplug the connection cable between the set-top box and the TV, and check whether the TV is still black after unplugging. If there is no black screen.
Generally, it is the fault of the set-top box; If it's still black, there is something wrong with the TV itself. 3. There is a problem with a certain part of the TV, resulting in a black screen of the TV. It is necessary to disassemble the parts of the TV set for inspection.
It is not recommended that users operate by themselves, and it is more appropriate to ask professional maintenance personnel to deal with it to avoid unnecessary danger to themselves.
-
Summary. Yes, TV time screensavers are a feature that any TV has. What it does is that when the TV is not used for a long time, it will automatically turn on to prevent the TV from being damaged due to long periods of non-use.
The time of the TV time screensaver can be set, generally set to 15 minutes or 30 minutes, or it can be set to a longer time. When the TV time screensaver is turned on, the TV will display a static**or dynamic**, as well as some text messages to remind the user to check the use of the TV. The function of TV time screensaver can effectively prevent the TV from being damaged due to long-term non-use, and at the same time, it can also save the power of the TV.
Yes, TV time screensavers are a feature that any TV has. Its function is that when the TV is not used for a long time, it will automatically turn on to prevent the TV from being damaged due to the non-use of the cheongsam. The time of the TV time screensaver can be set, generally set to 15 minutes or 30 minutes, or it can be set to a longer time.
When the TV time screensaver is turned on, the TV will display a static**or dynamic**, as well as some text messages to remind the user to check the use of the TV. The TV time screensaver function can effectively prevent the TV from being damaged due to long-term non-use, and at the same time, it can also save the power of the TV.
You've done a great job! Can you elaborate on that?
Yes, TV time screensavers are a feature that any TV has. What it does is that when the TV is not in use for a long time, it will automatically enter the screensaver mode to prevent the TV from malfunctioning due to long period of non-use. If there is a problem with the TV time screensaver, it may be because the TV has set the time incorrectly, or the power of the TV is not disconnected, causing the TV to not enter the screensaver mode.
The workaround is to check your TV's settings, make sure the time is set correctly, and disconnect the power supply so that the TV can enter screensaver mode normally. Personal tip: TV time screensavers are an important feature that can be used to prevent TV failures due to prolonged periods of non-use.
Therefore, it is recommended to check the TV's settings regularly to make sure the time is set correctly, and disconnect the power supply so that the TV can enter the screen saver mode normally.
-
Summary. Try the universal password: Hisense Toshiba TB1238 machine movement universal password is 2175 or 1238; Leroy 100hz machine heart universal password is 987; Lehua Mitsubishi + Philips machine movement universal password is 2442; Xia Hua E series Sanyo single-chip microcomputer universal password is 4321; Konka T5435 color TV unlocking method is:
Press the "Channel+" and "Channel-" buttons on the panel at the same time; Changhong A6The unlocking method of the machine movement is to press the "mute" button and the "display" key on the remote control at the same time; Changhong CN-12 The unlocking method of the machine movement is to press the "F" key and the "Mute" button on the remote control at the same time, or the "F" key and the "Back" button 3. Can't solve it? Tell me your TV model and we'll give you the decoding method. 4. Haven't you solved this step yet?
Find out the TV manual?
It's a great honor to answer for you, thank you for your support, I hope I can solve the problem for you to try the universal password: Hisense Toshiba TB1238 machine heart universal password is 2175 or 1238; Leroy 100hz machine heart universal password is 987; Lehua Mitsubishi + Philips machine movement universal password is 2442; Xia Hua E series Sanyo single-chip microcomputer universal password is 4321; KonkaT5435The unlocking method of color TV is:Press the panel at the same time"Channel+"and"Channel-"key; Changhong A6The unlocking method of the machine movement is to press the "mute" button and the "display" key on the remote control at the same time; Changhong CN-12 The unlocking method of the machine movement is to press the "F" key and the "Mute" button on the remote control at the same time, or the "F" key and the "Back" button 3. Can't solve it?
Tell me your TV model and we'll give you the decoding method. 4. Haven't you solved this step yet? Find out the TV manual?
It is estimated that it is poisoning, can you elaborate on it.
This phenomenon can be divided into two situations, one is normal downtime and the other is abnormal downtime. >>>More
Cats or problems with Netcom and Telecom.
It seems to have hit the "shock wave" Emergency measures: If you are accidentally infected with the virus, you can use the following steps to detect and kill: 1 >>>More
The detailed answer is available in the Windows Help.