How to install electric smart curtains, how to control electric curtains intelligently

1.Rail mounting.

2.Closure method.

3.Measurement method.

<>4.Installation:

5.Dimensional measurements.

6.The power cord is reserved.

The method of intelligent control of electric curtains: there is a special electric slide rail, which can be controlled by remote control or tmall elf voice; Calculated together, there are 8 control modes: including voice control, remote control, timing setting, one-key opening and closing, intelligent linkage, power failure hand pull, custom point, and light touch start.

The purchase of curtain motor is mainly based on the quality of the motor: the electric high hall machine is undoubtedly the most core position of the entire electric curtain, not only carrying the function of pulling the curtain, but also the most important component of intelligence.

At present, there are two kinds of AC motors and DC motors, the power of the DC motor will be smaller, and the weight of the curtain cloth that can be driven will be lighter, and the greater the power of the motor, the greater the noise, and vice versa. A 13W curtain motor can drive about 50kg of curtain cloth.

Electric curtain shopping list

1. Mr. Bang smart electric curtains.

2. Yeelight smart curtain can be connected to Siri voice control, curtain motor + 3-meter inner straight track + door-to-door measurement and installation.

3. Lumi AQARA smart curtain motor, automatic curtain electric Bu Tuan curtain Zigbee opening and closing curtain, can be connected to Mi Home HomeKit voice linkage.

Summary. Electric curtain installation method 1Thread the wire rope through the transmission wheel at the big end.

Electric curtain installation method 1Thread the wire rope through the transmission wheel at the big end.

2. Put the guide rail into the big end, and pull the steel wire to the other side of the guide rail in the direction of both sides (do not cross).

3. Put the stop and the required ball into the track and tighten the stopper.

4. Loosen the auxiliary pulley screws, pass the wire rope B edge through the screws in the middle of the two pieces of pressure acacia wire pieces in the Shen Grip Book, and push the auxiliary pulley into the guide rail at this time, and You Hong should pay attention to the wire rope must be kept on both sides of the pulley roller.

5. Adjust the small end nut to the outermost end, and pass the B edge of the wire rope through the small end pulley.

6. Put the wire rope A edge end line under the pressure sheet at the C of the main pulley, and tighten the screw at the C. Then put the wire rope B side into the main pulley, and push the main pulley into the guide rail while tightening the wire rope, and pay attention to the wire rope must be certified on both sides of the pulley roller. Missing configurations.

7. Put the required balls and stoppers into the track. Put the small end into the end of the guide rail to know the head, twist and tighten the stop. At this time, tighten the B side of the wire rope forcefully, and press the wire rope under the pressure sheet at D, and tighten the screw at D.

8. Drag the main and auxiliary pulleys to both ends of the guide rail, and tighten the fixing screws on the auxiliary pulley.

The steps for motorized curtains are as follows

1. Connecting track: First, insert the electric curtain track into the track connector, and tighten the two ends, and then use a screwdriver or hand drill to tighten the 4 fixing screws to make them firmly connected.

2. Positioning and punching: first measure the total length of the connected track, and then determine the specific installation position with the user, and prepare to measure the fixed position of the installation code after determining, and the installation code spacing is generally about 40cm.

3. Track installation: Since this track installation code is a rotary fixing method, do not tighten it when fastening the installation code, reserve the space for free rotation, and then put the track on the installation code, and tighten the installation code in turn to fix the track.

4. Track test: install the motor on the gearbox, toggle the fixed button, plug in the power supply, and use the remote control to test whether the opening and closing, suspension and other functions of the pulley are normal.

5. Hanging curtains: Finally, the curtains can be hung on the hanging wheel in turn according to the fold order to complete the installation.

Motorized curtains

Electric curtains are controlled wirelessly by motor drives. From the installation, it can be divided into built-in type and external type. Electric curtains are divided into electric opening and closing curtain series, electric lifting curtain series, electric ceiling curtain (outdoor electric canopy and indoor electric canopy), electric sun visor, electric sunshade and other series according to the different operating mechanisms and decorative effects, such as venetian blinds, roller blinds, Roman blinds, soft gauze blinds, organ curtains, honeycomb curtains, etc.

The installation method of the electric curtain: positioning size, installation and hoisting clip, pure lack of ants to connect the track with the motor, and adjust the motor program.

1. Locate the track and measure the size.

First measure the fixed hole distance and the size of the required installation track, and pay attention to the total length of the track is the sum of the motor, the track length and the sub-gearbox.

2. Install the hoisting clip.

Rotate the clip 90 degrees to connect with the track, and install the hoisting clip to the top plate with self-tapping screws.

3. Bury connect the track with the motor.

Put the motor into the main gearbox and rotate it 90 degrees clockwise, and the flat rotating shaft of the main gearbox should be consistent with the interface of the motor. After rotating in place, push the insert into the gearbox to the limit position, it will automatically lock, and the motor will be connected to the gearbox.

4. Adjust the motor program.

The tail end of the motor is equipped with a set of gears and micro switch devices, and the motor wiring requires forward and reverse rotation, so as to realize the self-positioning of the curtain opening and closing stroke.

How motorized curtains are controlled

1. Time control: set the switch time on the main controller, open the time in the early morning, the curtain will be opened slowly, and the curtain will be automatically closed when the closing time is in the evening. To pull it on or off temporarily, just use the remote control and gently press the "Open" or "Close" button.

2. Semi-automatic manual control: when opening or closing the curtain, you only need to press the stop button, and the curtain will stop immediately.

3. Intelligent brightness control: the main controller completes the automatic control by testing the ambient brightness, which is closed when it is dark and opened at dawn, with the mode of intelligent management, and does not produce malfunction.

4. Manual control: use the infrared remote control to directly control the opening or closing of the window. The control is done manually, that is, the motor is manually controlled to perform forward rotation, reverse rotation and stopping.