Apple 4S touch can t be flashed?

I don't understand what this question means, but if it's a question of "can I flash the screen if I can't touch the screen", then yes. If it is "the touch screen does not work, can it be solved by flashing", it is generally not possible.

Generally speaking, the touch screen is a hardware problem, which is caused by some improper operations carried out by the user (scratching, touching, excessive force) and so on, the screen will fail.

Flashing, on the other hand, is a factory reset and generally does not change the screen failure.

If it is to say "can the flashing be carried out", the answer is as follows:

3: Connect the device to the computer.

4: Turn on the computer, press and hold the home button + power button in white apple mode for a few seconds, and then release the power button until the computer prompts.

5: Shift-click Restore on the computer, select the firmware package, and the recovery starts.

If you can't touch it, what's the use of flashing the phone?

iphone

When the 4S flashing fails, enter DFU mode and flash again. DFU Mode Flashing Steps:

1. When your iPhone is turned off, connect it to the computer with a data cable and open the iTunes software of the computer.

2. Press and hold the power button for 2 seconds.

3. Press home without letting go of the power button

button for 10 seconds to force power off.

4. Don't let go of the home button, press the power button 1 time. Keep not letting go of the home button for about 15 seconds, and the phone screen will show that it is connected to iTunes

icon information to enter DFU mode.

5. The computer has a sound and text message prompting the discovery of new hardware, and iTunes prompts that there is an iPhone that needs to be restored.

Click Restore to restore iPhone firmware (Shift-click restore to select other iPhone firmware on your computer).

Motherboard problem Change your phone Repair a motherboard, you might as well change your phone.

The most common is to pull out the hand too early. When flashing the computer with a computer, many people will pull out the data cable in a hurry, and this will lead to serious consequences. In addition, poor contact of the data cable can also lead to this consequence.

When flashing, you must be calm, and ensure that you are connected, do not pull out the data cable at will, and generally wait until the computer prompts you to complete the unplugging. 2. The wrong firmware has been written. Generally, the firmware of different models cannot be swiped with each other, and licensed and parallel goods cannot be swiped with each other.

In addition, the configuration of mobile phones in different regions is also different, and the firmware is different. When flashing, be sure to select the firmware for flashing according to the model of the phone and the original sales region. 3. The lack of battery of the mobile phone will also cause the flashing process to be interrupted and the flashing process will fail.

iPhone can only unlock the screen lock by flashing it.

2. Put your phone into recovery mode

1. Press and hold the power button first, and when the shutdown option appears, please slide to power off;

2. Then press the power button to turn on the computer, the Apple logo will appear on the screen, do not release the power button;

3. Then press and hold the home button on the home screen until the screen goes black.

4. When the screen is black, please release the power button and continue to press and hold the home button on the home screen until iTunes on the computer side shows "An iPhone in recovery mode has been detected";

Note: If you can't enter the recovery mode, please do it several times.

4 can use the Aisi assistant, 4s doesn't seem to work! You still have to flash the phone!

No, not at the moment.

The activation operation after flashing the Apple 4s is as follows:

Preparation: Insert the SIM card into the Apple 4s.

Step 6: Choose whether to enable the iCloud function, it is not recommended to enable it. If you need it later, you can turn it on yourself.

Step 8: Choose whether or not to participate in the user feedback program. Select "Don't send".

If you mean that the phone can't be activated has nothing to do with the ID, then you are definitely not swiping the iOS 8 system. If you can't activate because of the ID, then you didn't turn off Find My iPhone before flashing it. If it's the former, you can flash ios8 (other methods are ineffective), if it's the latter, you can only bring the invoice and other documents that can prove that the phone is yours to Apple's after-sales service and ask him to help unlock it.

After flashing the locked version, it will return to the locked state and need to be cracked anew.