The headset doesn t make a sound after reinstalling the program, what to do

1. Click on the speaker chart in the lower right corner of the desktop -- Options -- Properties -- display the following volume controls -- check the microphone volume up --- OK and then turn the volume to the highest.

2. If it still doesn't work.

Is your pre-mic on?

Double-click on the small horn in the right corner, option - Properties, front and front mic are selected, so it should be able to use!

Are you using an ASUS motherboard?,If so,There's a setting in the BIOS.,In the second item,There's a chisp (I can't remember the English exactly.,It's basically these words),It has the South......South Bridge,There's an item in it that HD Audio changes it to AC 97 (there are two options in total.,The other one is),So you can go into the system and change the small speaker.。

3 still no.

Double-click the "Little Speaker" icon in the lower right corner of the desktop - click "Properties" in the "Options" in the volume control window - tick the microphone column in the options that display the following volume controls, so that the microphone item will appear in the volume control window - remove the tick in the mute in the microphone column, and the headset can be used (remember to mute it when not using the microphone, otherwise it will always be working, and there will be noise when listening to ** watching movies).

You can install a realtek hd and you can pull it.

Summary. Hello! According to your description, you can try the following methods to solve it:

If there is no sound from the earphones after plugging them in, it is recommended that you:

1.Adjust the headphone volume key + key.

2.Plug the headphones into another device and see if they can be used properly (rule out headset issues).

3.If it is used normally, please plug in the earbuds again and make sure that the earbuds are plugged into the bottom of the headphone jack of the phone.

4.Check that you are using original headphones. If not, test with original headphones.

5.If there is any abnormal software installed, you can uninstall it or restart it!

There is no sound from the headphones after switching software.

Hello! According to your description, you can try the following methods to solve the problem: If there is no sound after plugging in the earphones, it is recommended that you:

1.Adjust the headphone volume key + key. 2.

Plug the headphones into another device and see if they can be used properly (rule out headset issues). 3.If it is used normally, please plug in the earbuds again and make sure that the earbuds are plugged into the bottom of the headphone jack of the phone.

4.Check that you are using original headphones. If not, test with original headphones.

5.If there is any abnormal software installed, you can uninstall it or restart it!

I hope mine is helpful to you, and you can continue to ask me questions if you don't understand anything!

Microphone no sound setup tutorial.

There is no sound from the microphone, please check and set it up as follows:

1.Use the mouse to select the small speaker icon on the right side of the desktop taskbar, right-click the mouse, select "Open Volume Control" in the shortcut menu that appears, the "Master Volume" window will appear, in the "Options" menu, click "Properties", in the "Properties" window that appears, hit the box in front of the "Microphone Volume" option, and then press "OK". Go back to the "Master Volume" window, turn the "Microphone Volume" button up, and notice if there is a "Mute" option in front of the "Mute" option below, if so, you should remove it;

2.Go to the "Control Panel" (from "Start Menu" - "Settings" - "Control Panel"), in the "Control Panel" window.

Select "Sound and Audio Devices", open this window, select "Voice", click the "Test Hardware" button at the bottom of the window, and then follow the prompts, step by step, if your connection is normal, through this test, your microphone should have sound.