How to change the IP of the office computer without dialing?

Hehe! Didn't understand what you were trying to say!

There will be a number of times to apply for QQ every day! Wait until the next day to continue applying!

The IP address has been changed, and then you ping the gateway you configured on the computer, and there will be no problem with the line if it can be pinged; Do you use any management measures on your company's network that need to be opened in the technical department? You can ask.

Whether other people can get on, if you can't get on, see if the IP is correct and whether the DNS is right.

Then you can't use the route directly, you have to use the route in the LAN and then you can share resources. Settings within the LAN can also be connected to the Internet, and then resources can be shared within the LAN.

You can change the IP of the second computer to the same domain as the autodialer computer!

How to set it up:

Generally routers are managed for this one. 1 of these two.

The default computer is automatically obtained IP

If you use a router and can't access the Internet, it may be a router failure or a network card failure, if you use ADSL dial-up to access the Internet, you don't need to care about the IP setting, if you can't get it again, just select Automatically get the IP.

This IP can be obtained automatically with the router.

1. You can create a virtual machine in the computer, and use different IPs in the computer and the virtual machine.

2. You can suggest IP switching batch processing to convert at any time.

First open the network connection, select Auto Acquisition, and then look at the automatically obtained IP, gateway, DNS and other information from the network connection, and then select Manual Input, and enter it.

Try reinstalling the local NIC driver.

Local connection - Click Support.

You'll see what your auto-assigned IP is.

Or start-run.

cmd enter -ipconfig

You can also see it.

Is it impossible to manually set the IP option?

Hello, your problem is that you did not click to use the IP address below.

This question seems simple, if you can get the IP address, see if you can get the DNS, if you can get it, it stands to reason that you should be able to access the Internet, if you can't get it like this, then you have to ask the network administrator.

If it's a route to the Internet, all of them are set to get automatically, and you can get it!

First set up nothing to get it automatically.

If not, the DNS and IP address need to be confirmed.

Only change the numbers 152 on your diagram to any one of 1-254, but it's best to put the numbers at the back, someone in front of them has used them, and the others are just according to their colleagues, and it's best to contact your colleagues in charge of IP to record it.

Just change it to 152, 153, 154, etc., everything else is the same.

Change the last segment of the IP address and leave the others untouched.

You make it to automatically get the IP address and see.

You need to go to your company's network department to assign you a network address.

LAN is OK.

The one above is next to you, you don't need it, the others are the same as his.

If there is a duplicate IP, change the last one. Except).

You use this computer next to you to enter the IP:

Just change the IP address to the last bit between 1 and 255.

If you don't repeat it with others, it's OK

You have a few computers in your office, and this computer is not available for Internet access now. You can try to change the last number and try it, and everything in between.

Find your network administrator. It is possible that there is a virus in your computer, and frequent packet sending causes the switch or router firewall to temporarily cut off your IP or MAC. Our company is bound to IP and MAC address.

Try changing someone else's MAC address to see. If it doesn't work, change the network card!