Does tile quality have anything to do with physical health?

Most of the time it doesn't matter.

Hazards of poor quality tiles:

1. The flatness of poor quality tiles is not good, and they cannot fit the floor perfectly, and they are easy to warp after being paved, so that they need to be re-paved with warped tiles, which is a waste of time and money.

2. Poor quality tiles contain more harmful substances. Poor quality ceramic tiles in the processing process, the use of raw materials and processing methods are not up to standard, after leaving the factory may be noisy and there are harmful substances such as formaldehyde and benzene, long-term use, easy to affect human health.

3. Poor quality tiles have low stain resistance, the surface is easy to scratch, and the surface of the tile is easy to be dirty, which is inconvenient to clean.

4. Poor quality tiles are prone to black spots. The preparation of raw materials, glazing and other processing links are irregular or errors, and the tiles produced are prone to black spots and pinholes, and these tiles whose quality is not up to standard are prone to accumulate stains, tile bleeding and other problems in the process of use.

5. Poor quality ceramic tiles have a low degree of wear-resistance, short life, short replacement time, and waste of money. The degree of wear resistance of the tile determines the service life of the tile, and the greater the wear resistance, the longer the service life; The less wear resistance, the shorter the service life.

Distinguish good and bad tiles testimony method:

Look at whether there are pinholes, spots, glaze texture, and color difference on the glaze.

See if the tiles are deformed;

Look at the water absorption rate of the tile, the smaller the diffusion area and the longer the drying time, the lower the water absorption rate and the better the quality;

Listen to the sound and hit the tile with your hand, the sharper the sound, the better the quality;

The heavier the weight, the better the texture;

Unpack and inspect to see if there is damage, draw a piece of different boxes of products, and see if there is color difference and size after tiling.

Impact: 1 Inferior tiles contain more harmful substances.

Poor quality ceramic tiles in the processing process, the raw materials and processing methods used are not up to standard, after leaving the factory there may be harmful substances such as formaldehyde and benzene, long-term use, easy to affect human health.

2 Inferior tiles are prone to black spots.

The processing links such as raw material blending and glazing are irregular or error-inducing, and the tiles produced are prone to black spots and pinholes. These tiles whose quality is not up to standard are prone to problems such as accumulation of stains and tile bleeding in the process of use.

3. Inferior tiles are easy to warp after being paved.

After the quality of the tile is paved, it is easy to have problems such as warping due to the unevenness of the tile itself. If the edge is severe, it may be necessary to knock off all the tiles and redecorate.

It is tiles that will definitely have a bad effect on the body. So to buy ceramic tiles or to buy big brands.

Distinguish good and bad tiles testimony method:

Step 1: Look at the glaze for pinholes, spots, glaze texture, and color difference;

Step 2: See if the tiles are deformed;

Step 3: Look at the water absorption rate of the tile, drop it on the back of the brick with water, the smaller the diffusion area, the longer the drying time, the lower the water absorption, and the better the quality;

Step 4: Listen to the sound and hit the tile with your hands, the sharper the sound, the better the quality;

Step 5: Weigh the weight, the heavier the weight, the better the texture; Step 6: Unpack and inspect to see if there is any damage, draw a piece of different boxes of products, and see if there is color difference and size after tiling.

The radioactivity of ceramic tiles is minimal, but the improper use of radioactive tiles does not cause immediate damage to the human body, but may cause potential and long-term harm to the human body, especially lung health.

The raw materials of ceramic tile products are in stone powder, quartz powder, feldspar powder, zircon powder and other minerals, and these raw materials contain a small amount of radioactive elements, if the radioactive intensity exceeds a certain amount, it is bound to cause harm to people.

Identification method of good or bad tiles.

1.Detect water absorption.

The water absorption rate of ceramic tiles is a factor that reflects the hardness of tiles, but it does not mean that the lower the water absorption rate of tiles, the better. When purchasing, you can first pour water on both sides of the tile, and then carefully observe the penetration of water, if you buy a polished tile, the water is immediately sucked in, it means that the tile you choose is inferior; On the contrary, it is a good tile.

2.Weigh the weight.

The weight of the tile is also a major criterion for identifying the quality of the tile, the same specification of the product, the high density of the brick feel is relatively heavy, that means the product is the best; On the contrary, products of inferior quality have a lighter feel.

3.Flatness is detected.

When you buy ceramic tiles, you should also observe the flatness of its surface. After confirmation, the decoration master can carry out the construction operation, which can not only avoid the aesthetic problems caused by the problem of tiles, but also avoid the master from shirking his own craftsmanship problems to the problem of tiles.

4.Stain resistance.

Generally, the tiles in the living room will accompany us for a long time, but if the tiles are dirty and not easy to clean, it is estimated that it will not be long before you feel very bored and want to re-pave these tiles. In fact, you only need to write a few large characters or drop a few inks on the surface of the tile, and wait a while to see if it is easy to clean. If there is still ink left after cleaning, it is recommended that you choose another tile.

5.Test the wear resistance.

Now the ceramic tile has carried out a series of transformations in wear resistance, whether it is polished brick, microcrystalline stone, full glaze, antique brick and the like, there is a qualitative leap, judge whether the surface is wear-resistant, we only need to pick up the knife or key in our hands, scrape the surface of the tile, to see if the glaze layer on the surface of the tile will be scraped off, if even such a small cut can not be bearable, then this tile must not be wear-resistant.

Home decoration should buy tiles, how to buy value for money, satisfactory tiles also have a certain knowledge, in general the principle of buying tiles is: a look, two listens, three drops of water, four feet.

First, look at the appearance.

The color of the tile should be uniform, the surface finish and flatness should be good, the surrounding rules should be regular, the pattern is complete, and four or five pieces should be extracted from a box to see if there are defects such as color difference, deformation, lack of edges and corners.

2. Listen to the sound.

Tap with a hard object, the crisper the sound, the higher the degree of porcelainization, and the better the quality. You can also use the thumb, index finger and middle finger of the left hand to clip the corner of the tile, hang down easily, and tap the middle and lower part of the tile with the index finger of the right hand.

3. Drip test.

You can drop water on the back of the tile to see how fast the water soaks after it spreads, generally speaking, the slower the water absorption, the greater the density of the tile; On the contrary, the faster the water absorption, the sparse density, and its intrinsic quality is superior.

Fourth, the measurement. The higher the accuracy of the side length of the tile, the better the effect after paving, and buying high-quality tiles is not only easy to construct, but also can save man-hours and accessories. Use a tape measure to measure whether there is a difference in the size of each tile, and the high accuracy is the top grade.

In addition, observe its hardness, ceramic tiles with good hardness, strong toughness, not easy to break and rot as the top quality. The edges and corners of the tile fragments are scratched on each other, and the broken fragments are inspected to see whether the broken parts are fine or loose, whether they are hard, brittle or soft, whether they leave scratches, or scattered powder.

Whether the size is standard is the key to judging the quality of the tile, measure the diagonal and quadrilateral size and thickness of the tile with a tape measure or caliper, whether the thickness is uniform, good tile, the sound is brittle, indicating that the porcelain content is high. If the sound is "clicking" with the sound of stubble, it means that there are cracks hidden in the brick.

Good tiles, the master installation is also convenient for construction, and the effect of installation is also standardized.

Hazards of poor quality tiles:

1. The flatness of poor quality tiles is not good, and they will warp after being paved. The light is to knock off the warped tiles and re-paste them, or the heavy ones may have to knock off all the tiles and buy them again.

2. The degree of wear resistance is large, the life is short, the wear resistance of the tile determines the service life of the tile, anyone who sees the surface of the tile is full of scratches, will be very uncomfortable, want to knock off the new one.

3. The degree of stain resistance is low, easy to get dirty, and it is not easy to clean.

4. There will be bubbles and pinholes on the glaze, which is easy to turn black after a long time, which will affect the appearance.

5. Poor quality bricks are very brittle and easy to break, and they will return to moisture on cloudy days.

The flatness of poor quality tiles is not good, and it is very easy to warp after paving, so that it is necessary to re-lay the warped tiles; Contains more harmful substances; The degree of stain resistance is low, the surface is easy to scratch, and the surface of the tile is easy to be dirty, which is inconvenient to clean; It is recommended to choose some *** brands to buy, such as: Oushennuo tiles, eagles, Dongpeng These are better brands, you can consider them.