Does the hardwood floor have to use keel, as the title Thank you

The installation of solid wood flooring must use wooden keel, only in this way, the installed wooden floor is firm, moisture-proof performance is good, and the service life of the wooden floor is prolonged. How to install solid wood flooring The traditional installation method of solid wood flooring is wood keel upper flooring, which has been proven by practice for a long time and is the safest and firmest. It suspends the floor, and in addition to being well protected from moisture, it also has the advantage of being ventilated, allowing the floor to "breathe" properly, adapt to each other and fit tightly.

At the same time, the comfort of the foot is also the biggest advantage of this installation method. The thickness of the wooden keel and the floor ensures that the floor has good elasticity and can provide enough cushioning when people fall, comfortable and safe. In addition, there is a method of laying the floor directly on the cement floor, which is more convenient to install, but also brings problems such as easy to be deformed by moisture, and easy to produce sound due to unfirm installation in use.

Some consumers think that the laying keel will affect the floor height of the house compared with the straight layering, and decide the installation method from this. In fact, it is not necessary, because if straight paving, the cement floor must be leveled, the height of leveling should be at least above, and the height of the paving keel is the cement floor does not need to be leveled, so calculated, the influence of paving keel and straight paving on the height of the layer will not exceed In addition, a large amount of cement, sand should be used for leveling with cement, and the cost will be higher. The most critical issue in installing a wooden keel is to first determine the spacing of the keel, which is related to the length of the floor chosen.

At present, the standard of floor length on the market is commonly known as "length" and "the majority of them". If the consumer can select the floor before laying the keel, it is the best, so that the keel can be laid according to the length of the selected floor, but because the keel is often at the beginning of the carpentry process, many consumers have not paid attention to the floor or can not be determined at this time, so there is often a floor that is bought home and the wooden keel that was originally blindly laid does not match, thus causing a lot of unnecessary trouble, if the length of the floor can not be determined before the keel is laid, it is best to pave according to the length, In this way, there will be much more space to choose when buying flooring at the end. Another point to pay attention to is the dry moisture of the keel, the keel sold in the general market is not dry, consumers need to buy home in advance and put it on the balcony and other places to dry naturally, and generally start to start the decoration when you can buy the keel home.

No, my house has just been renovated, and the master said that it must be installed, otherwise... The wooden floor is finished)

Hardwood floors must have a keel, which prevents the floor from getting wet. , if it is geothermal, it can prevent deformation by heating.

Keel pavement method, also known as wood grating method or wood frame method, is one of the commonly used laying methods for solid wood flooring, which is a paving method that lays the floor directly on the wooden keel or on the wooden keel and wool floor, and is suitable for the laying of solid wood floors in non-floor heating environments across the country.

The keel is mainly used to make a shape, a material for fixing the structure, the specific method is to use wood lines (commonly used for larch) and other materials, with nails or wooden nails fixed into criss-crossed, equal spacing of the grid support, similar to the keel, so this process is called "beating keel".

At present, most of the solid wood flooring adopts the traditional keel pavement method, but at the same time, a new type of pavement method is increasingly favored by consumers, which is suitable for laying solid wood floors in the national floor heating and non-floor heating environments. The natural solid wood floor steel buckle fastening scheme that has obtained the national utility model patent is a new steel buckle fastening method in the industry, which uses the tough alloy steel buckle to firmly buckle each floor and splice it into a whole. Compared with the traditional keel pavement method, there is no need for keel, the construction is efficient, the auxiliary materials are reduced, and the installation cost is reduced.

At the same time, there is no need to nail and fix the floor, so as to avoid damaging the overall structure of the floor, so that the solid wood floor can be repeatedly disassembled and refurbished.

Moisture-proof treatment of the keel, fixing the keel, proper tightness during assembly, and leveling treatment are all problems that need to be paid attention to when installing solid wood flooring with wooden keel.

When installing solid wood flooring with wooden keel, you must pay attention to the moisture-proof of Murong Valley. Because the wooden keel that consumers buy back in the market is not a dry keel at all, it needs to be fixed on the ground about 30 days in advance, and the moisture-proof layer should be paved between the ground and the keel to check the moisture content of the wooden keel when the floor is paved, if the moisture content is more than 20%, it means that the moisture content is relatively high, and the ventilation treatment should be continued, and the wood floor can be paved when its moisture content drops to about the same as the moisture content of the solid wood floor, so as to avoid arching and cracking after the wood floor is paved.

When the solid wood floor is installed with the wooden keel, we must pay attention to the fixing of the wooden keel, in the construction process, the wooden keel should be fixed by beating the wooden wedge, some construction units use iron nails when fixing the wooden barrel bone, this method has weak fixing ability, its nail holding ability is insufficient, after paving the wooden floor, it is very easy to cause the wooden floor to loosen, people will make a harsh sound when stepping on the wooden floor, and will also affect the decoration effect of the graphite floor.

Solid wood floor in the paving of its expansion and contraction will be affected by the ambient temperature and humidity, so when the wooden keel is used to pave the wooden floor, it is also necessary to reasonably arrange the tightness of the keel and the assembly tightness of the wooden floor according to the temperature and humidity of the environment.

When the solid wood floor is installed with a wooden keel, it is necessary to pay attention to the leveling of the ground, and the ground should be treated horizontally before starting construction, and then the keel can be paved, and the keel can be paved after the keel is fixed and let it dry naturally and the moisture content can be reduced to a suitable range, so that the wooden floor will have a relatively long service life and good decoration effect, and people will not appear harsh sound when walking out of it.

The problem to pay attention to is that all rooms are leveled, the floor is marked, the floor is punched according to the regulations, the holes are stuffed with wooden sticks, the wooden keel is laid, the keel is adjusted according to the horizontal line, the floor is laid, the baseboard is installed, and the paint is touched.

When the wooden keel is installed, it must be fixed with sawdust and iron, otherwise it will not be firm, and the installation of Wolong Valley is mainly to prevent the installation from being too loose or too tight, and to prevent the ground from being uneven.

It is necessary to prevent the unevenness of the ground, prevent the keel from not drying, and then step on it, prevent the assembly from being too loose or too tight, and prevent the fixing method of beating wooden wedges and iron nails.