Choose floor heating, color heating or mixed installation

I think it's very interesting, who said floor heating floating dust? Isn't it air conditioning that can blow up, and thermal radiation can blow up the ashes? What an exaggeration!

First of all, mixing does not mean that it cannot be installed, but the general mixing type is prone to temperature differences, which makes people feel not very comfortable. For example, if the living room is installed but the bedroom is not, then when you enter and exit the bedroom, it will obviously feel like two worlds. This is a common problem we have had before.

Let's talk about the second question, it's not that the composite wood floor is not good, this is a misunderstanding that everyone slowly walks into, as soon as I hear about floor heating, I feel that formaldehyde will be produced after floor heating. After heating, the floor temperature will only be about 20 degrees, if this temperature will produce formaldehyde, then all the floors can not be paved, and then think about the floor heating that has been popular in Europe and the United States for two centuries, how to get so many problems in China, sometimes some people just don't know how to pretend to understand, I am angry when I see it.

Of course, it is true that what decorative surface will produce temperature insulation for floor heating, such as natural stone or ceramic tiles, the heat transfer is definitely better than that of floors and carpets, here I will only say a few examples, natural stone, tiles, laminate flooring, composite wood flooring, solid wood flooring, carpets... These are one less conductive than the other, and of course the temperature difference from the highest to the lowest will not exceed 6-7 degrees.

So what I gave, either all the floor heating, or not at all, the mixture is high or low.

Little feet are warm.

Mixing radiator and floor heating is the most reasonable method, to solve the water temperature problem of radiator and floor heating, you need to install a water mixing device.

I feel that the mixed pack is prone to temperature differences, which can be uncomfortable at times. For example, if the living room is installed, but the bedroom is not installed, it will obviously feel like two worlds when entering and exiting the bedroom.

Yes, ground radiant heating is mainly divided into water floor heating and electric floor heating according to the different heating methods, and electric floor heating is divided into heating cable heating and electric heating film heating carbon fiber electric heating.

Water floor heating is low-temperature hot water ground radiant heating, which is a heating method that uses hot water with a temperature of no more than 60 as the heat medium, circulates in the heating pipe, heats the floor, and heats the room through the ground in a radiant (primary) and convective (secondary) heat transfer mode.

Heating cable ground radiant heating is a heating method that uses a low-temperature heating cable as a heat source to heat the floor, and through the ground to radiate the primary) and convection (secondary) heat transfer to the indoor heating method. Commonly used heating cables are divided into single-core cables and double-core cables.

I hope it can help you, I wish you a happy life, and I hope you can give a thumbs up, thank you! Question: I want to consult, my floor heating is not very hot, I want to change the heating, can I do it?

Is it big to change to a warm driver?

If the floor heating is not hot, it is recommended to check from the main pipeline, whether the main pipeline valve is open, whether the water separator is equipped with a filter screen, and you can also directly ask the installation master to come to the home for inspection.

In general, mixed decoration means that there are extra rooms in the home, such as the attic of the villa, the guest bedroom that has been uninhabited for a long time, and so on. If it is a home decoration area, it is 100 square meters, and it is not recommended to mix it. For rooms or duplexes with relatively high floor heights, a mixed system of floor heating + radiators can be used.

Appropriate radiators are hung on the walls, and floor heating is laid as normal. In this way, the problem of large temperature difference between the roof and the ground is solved, and the heat required by the design can be achieved, and the cost and operating expenses are lower.

Absolutely. You can find a professional heating designer to help you design a heating plan for free. You can make an online appointment for free door-to-door design.

There are some problems with the mixing of underfloor heating and hanging heating:

1. Parallel connection of floor heating and hanging heating: the water flow resistance of the two systems is not the same, and there must be one fast flow rate, one slow flow rate, uneven temperature, and low water flow pressure.

2. Floor heating and hanging heating in series: the pipeline circulation is not smooth, the water flow is slow, the resistance increases, and the possibility of not heating is very high. There is also a problem, the floor heating with hanging heating and the other floor heating circuit obviously have different resistance, and the requirements for the flow rate are also different, and in the case of different flow rates, it is impossible to guarantee that both circuits are hot.

Therefore, the floor heating cannot be mixed with the hanging heating, which will lead to the situation that a single circuit is not hot.

Yes, ground radiant heating is mainly divided into water floor heating and electric floor heating according to the different heating methods of several volts of land lighting, and electric floor heating is divided into heating cable heating and electric heating film heating carbon fiber electric heating.

Water floor heating is low-temperature hot water ground radiant heating is a heating method that uses hot water with a temperature of no more than 60 as the heat medium, circulates in the heating pipe, heats the floor, and heats the indoor heat through the ground in the form of radiation (primary) and convection (secondary) heat transfer.

Heating cable ground radiant heating is a heating method that uses the low-temperature heating cable as the heat source, heats the floor, and heats the room through the ground by radiating the primary) and convection (secondary) heat transfer. Commonly used heating cables are divided into single-core cables and double-core cables.

Summary. The disadvantage is that the construction will be more troublesome, the future maintenance and overhaul will be more complicated, and the system will be more complicated. The comfort in the room with the radiator installed is not so good.

However, the mixing of the two also has many advantages, such as energy saving, and can be turned on according to the needs of use.

Hello, I have seen your question and are inquiring about relevant information, please be patient.

Are you half underfloor heating and half radiators?

The disadvantage is that the construction will be more troublesome, the future maintenance and overhaul will be more complicated, and the system will be more complicated. The comfort in the room with the radiator installed is not so good. However, the mixing of the two also has many advantages, such as energy saving, and can be turned on according to the needs of use.

As far as general home heating is concerned, do not mix floor heating and radiators; Because the underfloor heating system is low-temperature heating, the water flow rate required is large, while the radiator requires a high temperature, and the water flow is relatively small. Comparatively speaking, when using underfloor heating, the underfloor heating pipe network entering the room should be twice as large as the pipe network when using radiators, so as to meet the needs of large flow rates.

The mixed installation scheme of floor heating and radiator is relatively suitable for heating in large spaces such as duplexes or villas. Usually, the mixed installation of floor heating and radiators is manifested in the use of floor heating in public areas and radiators in rooms. Because people generally stay in public areas such as living rooms and restaurants, floor heating does not affect the effect of interior decoration, but also meets the heating needs of the elderly and children.

The radiator in the room can heat up quickly, which is very suitable for young people who come home from work, and is stylish, comfortable and energy-saving.

Floor heating and radiators can be mixed, but suitable for larger spaces, such as villas and duplexes, etc., and the overall cost is more expensive than a single heating system, because a set of pre-mixed centers need to be installed, the device is generally installed in the water collector, after the installation of the pre-mixed center, a part of the high-temperature hot water generated by the boiler can be turned into low-temperature hot water for floor heating circulation.

Generally, do not mix floor heating and radiators; Because the underfloor heating system is low-temperature heating, the water flow rate required is large, while the radiator requires a high temperature, and the water flow is relatively small.

I think it should not be possible to mix floor heating and radiators, because we know that the base temperature of the radiator is relatively high, and the base temperature of floor heating is relatively low, so if the two are mixed, it may either overheat or fail to reach the heating temperature.

Can floor heating and radiators be mixed-0128-Zhang Zhenhui-B station.

The mixing of floor heating and radiators requires the addition of a pre-mixed center device, which is installed in the manifold. The reason for this is: the hot water produced by the wall-hung boiler at the same time has only one temperature, the floor heating is running at low temperature, only 40 of low temperature water is needed, and the radiator heating is running at high temperature, which requires 70-75 water.

The pre-mixing center device is installed to turn part of the high-temperature hot water of the radiator into low-temperature hot water for the circulation of floor heating, so that the floor heating and radiator can be installed at the same time.

Large-area luxury villas are suitable for mixed installation of floor heating radiators; Depending on the needs of the room, radiators or underfloor heating can be used, which can not only be more energy efficient, but also meet the needs of everyone. In addition, the use of one boiler also drives two different temperature systems, which also greatly reduces equipment costs.

In fact, most consumers will only install floor heating or radiators, and rarely install floor heating and radiators. Because it seems that the construction is more difficult and the cost is higher. However, in order to get the dual advantages of floor heating and radiators, some specific occasions use a mixture of floor heating and radiators, which may be more cost-effective and can achieve better comfort results.

Mixed underfloor heating and radiators - luxury villas are the most suitable.

There are several floors in a mansion or villa, so different levels are designed to show different functions according to the decoration effect, such as restaurants, bedrooms, rooms for the elderly and children, etc., so the materials used in the ground are not the same, and the natural installation of heating equipment is also different.

Mixed floor heating and radiators - the most suitable for mixed installation of large area flat-floor houses.

The area of the same flat floor room is particularly large, mainly living room, bedroom, study, baby room, etc., but the most important thing is the living room, because it is located in the middle position, mainly using the wall to hang radiators, how to say it is a little bit to destroy the overall decoration effect of the living room, so if this place is laid with floor heating.

Mixed underfloor heating and radiators – best suited for meeting rooms or workshops.

The high-rise conference room heating equipment must be equipped, and the heat index has to be configured according to twice the general heat index, if all the radiators are used, then the number of radiators is too much, and it will feel that the wall is full of radiators, which greatly affects the visual effect, and if all the floor heating is installed, then the distance between the pipes is too dense, and there is no way to construct.

A mix of underfloor heating and radiators is more suitable for places such as luxury houses, villas, conference rooms or workshops.

Although radiators can be mixed, many people don't recommend mixing them! Why?

1. Water leakage, affecting life expectancy.

There is a term in the industry called "aluminum is not afraid of alkalis, steel is not afraid of oxidation and corrosion, and copper is not afraid of electrolytes". Since radiator heating mainly relies on water circulation steel and copper-aluminum heating materials, the requirements for water quality are also different. If it is mixed in the same circuit for heating, due to the different material properties, an electrochemical effect will occur, and the radiator will gradually corrode the radiator copper and aluminum, causing the radiator to leak, and more seriously, it will damage the household items in the home and lead to heavy losses.

2. Reduce the heating effect.

Depending on the material, the thermal conductivity of the radiator, its own heat dissipation performance and high temperature resistance are also different. Usually, the inside of a copper-aluminum radiator is made of red copper tubes. The thermal conductivity is higher than that of steel, but the resistance to high temperatures is not as good as that of steel.

In the case of a hybrid connection, the heating temperatures tend to limit each other, and the heating temperature is greatly reduced.