-
The quality of the products used is very good.
-
When choosing a floor heating floor at home, you need to consider its performance and safety. How to choose the floor heating floor? PChouse will take you to find out.
1. The floor must not have odors.
In the decoration pollution, the most serious direct release of pollutants is the board structure and panel furniture. When choosing the floor, take a wooden board and smell it at the side groove, if it is more pungent, it means that the release of formaldehyde is relatively high, and it is not an option.
2. The floor should meet the standard.
Any environmentally friendly geothermal floor must have the green building materials certification mark of the State Environmental Protection Administration, while the geothermal floor and furniture need to provide a test report from an authoritative organization at or above the provincial level.
3. The floor is reasonable.
There is a certain standard for the formaldehyde emission of geothermal floors, and the current national standard for wood suitable for indoor use is EI level, that is, the formaldehyde emission is; The E0 standard with formaldehyde emission less than is the European standard to be adopted in China. This wood is currently the most environmentally friendly on the market, but it will also be a little more expensive.
4. Pay attention to selection.
If you must choose ordinary solid wood flooring as a geothermal floor, you should try to choose a floor with a crawler layer on the back, which can be moisture-proof and waterproof, and can maintain the moisture content of the wood and the humidity balance of the surrounding environment. In the same environment, solid wood flooring has a large amount of deformation compared with laminate flooring, so it is necessary to pay attention to good dimensional stability when choosing.
-
[Enter the area and get the decoration for free**].
After installing the floor heating system, many families will choose to lay special wood floors for floor heating. There are many types of floor heating wood flooring on the market, and some consumers don't know which wood floor is better to choose, so how do we choose a special wood floor for floor heating? Next, I will briefly introduce it to you.
1. When we choose underfloor heating wood flooring, we need to pay attention to the thickness of the wood floor. Floor heating is heat transfer from bottom to top, and the ground decoration will hinder heat transfer to a certain extent. If the thickness of the wooden floor is more than 15 mm, it is difficult for the heat to reach the surface of the floor, so the heating effect is not good.
If the wooden floor is too thin, it will affect the insulation effect. The standard thickness of underfloor heating is between millimeters. 2. When we choose wood flooring, we also need to pay attention to its wear resistance, moisture and heat resistance, stability and other aspects.
Generally, the smaller the size of the wood floor for floor heating, the better its stability. When we also buy, we also need to see whether the wood floor substrate is dense, and only a relatively dense wood floor can ensure that there is no cracking and deformation at high temperatures. When choosing a wooden floor, its expansion coefficient should be less than that, and the smaller its expansion coefficient, the better its moisture-proof performance.
3. When we choose wood flooring, we also need to pay attention to its environmental performance, and try to choose wood flooring with low formaldehyde content. Because when we use floor heating, the environment is relatively closed, and the indoor temperature will be relatively high, and the higher the temperature, the more formaldehyde will be released, and there may be excessive formaldehyde. The formaldehyde content of wood flooring should be less than.
When you choose floor heating wood flooring, the wood floor needs to have good conductivity, environmental protection, thermal stability and deformation resistance.
Do the math how much it will cost you to renovate your home
Solid wood floor heating floor for home decoration is very good, this bottom-up heat conduction method is in line with the health concept of traditional Chinese medicine "warm feet and top cool", I renovated the house and bought the solid wood floor heating floor of David floor, the effect is very good.
Myth 1: The thicker the dough, the better.
In the process of purchasing floor heating floors, some consumers blindly pursue the thicker the multi-layer parquet skin, the wider the floor, the better, and the longer the floor. In fact, the thicker the skin of the multi-layer parquet, the more pronounced the characteristics of the parquet floor. In the process of environmental change, the greater the stress generated by the skin when the floor shrinks and swells, and the chance of floor deformation and cracking increases. >>>More
Wood flooring has obvious advantages in terms of thermal insulation performance of indoor temperature, and floor tiles have relatively poor thermal insulation performance due to fast heat conduction. Especially in the spring and autumn seasons adjacent to winter, the floor tile surface will give people a cold feeling, which is not comfortable enough. The surface of the floor tile has a smaller coefficient of friction than the wooden floor, which makes it easier to slipIt is easy to fall and bump into small family accidents, so in families with small children and the elderly, it is more suitable to choose wooden flooring. >>>More
Many people on the market are arguing about the quality of solid wood flooring and parquet flooring, in fact, there is no good or bad thing about solid wood flooring and parquet, the key is to see whether it is the most suitable for your use requirements. Solid wood flooring has a high-grade, beautiful, natural, generous, environmentally friendly, durable, good foot feel, adjust temperature and humidity and so on. Hardwood parquet is mainly developed for the current shortage of wood resources, with the characteristics of resource saving, cheap, solid wood effect, etc., in addition, it is especially suitable for geothermal environment. >>>More
Generally speaking, there are three kinds - chemical soaking, projectile cleaning, and pulsed wave physical cleaning. Among them, the pulse cleaning method is the most used for floor heating, which can clean the scale and impurities of the floor heating pipe and water separator at one time. >>>More