How is the Gangdis wall hung boiler used? Exhaust gas no? How many failures are there?

I am a user in Zhengzhou, and I have bought the wall-hung boiler of Gangdis for 4 years and have never broken it. With this also to save gas, my house is 148 square meters, a heating period only cost more than 860 yuan, my friend's use is a self-proclaimed imported Vaillant a heating period spent more than 1900, he is floor heating, the room is smaller than mine more than 20 square meters, my stove is the old stove of Gangdis, I heard that now Gangdis's ** energy-saving king, more energy-saving, I plan to change a**, Gangdis I think it is good, this is just a suggestion, pay attention or you take,

There is so much nonsense that comes, the landlord remembers, the exhaust gas of the European model, the energy saving of the Asian model, but the heating speed of the European model is faster than the Asian model, and the quality is so much said that it is almost the same, except for some small manufacturers who do not have a production license, I am now using the Gangdis, which is much more energy-saving than the European model, and the heating speed is about 6 minutes worse, and the heating speed is burned out with gas, and it is clear at a glance.

Gangdis's nursery side go, don't crack down on the same industry, I used it for two years, small problems continue, after-sales is not standardized, sky-high asking price, the promised warranty period is not, and it is currently close to scrapping. If the repair they say more than 700, the man-hour cost 50, pit.

The wall-hung boiler of Gangdis can be used, the after-sales is good, it is also energy-saving, the quality can be, I have used 3 heating periods, it has not been broken, I think it is still very good,

I haven't heard of it, pure domestic knockoffs, cheap to buy, and wait to regret it when you use it.

Gangdis this is not very clear. The exact performance is also unclear.

Hello dear, I am glad to answer for you, how to adjust the temperature difference of the wall-mounted gas furnace in Gangdis 1When setting the temperature difference of the wall-hung boiler, the temperature of the inlet water and the temperature of the outlet water should be adjusted correctly, and the temperature difference between the two should reach 10 degrees. For example, if the inlet water temperature is set to 40 degrees, then the return water temperature should reach 50 degrees.

2.The smaller the difference, the more economical, environmentally friendly and energy-efficient it will be. 3.

If the temperature difference between the two is large, the natural gas consumption will be higher, and the indoor temperature will rise more slowly. In addition, the adjusted temperature will be different depending on the time of day. In the morning, you can set the temperature rise slightly lower, and if you are more afraid of cold, you can increase the temperature appropriately.

The Gangdis wall-hung boiler is an efficient and environmentally friendly heating device, but it may malfunction due to factors such as the time of use and the cause of the failure**. Here are some common Gangdis wall-hung boiler failures** and their solutions.

Fault**. Indicates that the gas valve electronic controller is faulty and cannot turn on the gas**. At this time, it is necessary to check whether the gas valve wiring is properly connected and determine whether the gas valve controller needs to be replaced.

Fault**. Indicates that the combustion gas sensor is faulty and needs to be cleaned or replaced. At this point, the combustion gas sensor needs to be inspected and cleaned or replaced.

Fault**. Indicates that the hot water sensor is faulty and needs to be replaced. At this point, the hot water sensor needs to be checked and replaced.

Fault**. Indicates that the exhaust gas temperature sensor is faulty and needs to be cleaned or replaced. At this point, the exhaust gas temperature sensor needs to be checked and cleaned or replaced.

Fault**. It means that the pump is faulty, and you need to check whether the pump power supply, wires, and motor are working properly. If it is not normal, the pump needs to be replaced.

Fault**. Indicates that the motherboard has failed and needs to be replaced. At this time, you need to contact the factory or after-sales service center to repair or replace the motherboard.

The above are the common faults of the Gangdis wall silver hanging furnace** and their solutions. In the process of using the wall-hung boiler, it is very important to pay attention to maintenance and repair, which can be taken into account to effectively extend its service life. If the above methods do not solve the problem, if necessary, please contact a professional wall-hung boiler maintenance personnel for repair.

Summary. 1. Poor contact of the wire plug, solution: replug the wire plug.

2. The temperature probe is damaged, and the solution is to replace the temperature probe assembly.

3. The main control board is faulty, and the solution is to replace the main control board.

4. The gas wall-hung boiler has a strong home heating function, which can meet the heating needs of multi-bedroom rooms, and each room can be set at will according to the needs of the comfortable temperature, and a room can also be turned off separately according to the needs.

It is enough to provide high-flow constant temperature sanitary hot water for family bathing, kitchen and other places, which is economical and practical.

Gangdis wall-hung boiler EP fault and troubleshooting method.

1. Poor contact of the wire plug, solution: replug the wire plug. 2. The temperature probe is damaged, solution:

Replace the temperature probe assembly. 3. The main control board is faulty, and the solution is to replace the main control board.

4. The gas wall-hung boiler has a strong home heating function, which can meet the heating needs of multi-bedrooms, and each room can be set at will according to the needs of the comfortable temperature, and can also decide a room to turn off the heating separately according to the needs, and can provide a large flow of constant temperature sanitary hot water for family bathing, kitchen and other places, economical and practical.

Hope you can.

After the Gangdis wall-hung boiler is turned off and restarted again, we find a prompt button on the wall-hung boiler, which is in a flashing state; We hold down the flashing key with our hands, and press and hold it for a while to restart it.

The wall-hung boiler will protect itself when the gas is stopped, and then automatically turn off the water and gas; After the gas is stopped, the shutdown must be manually restarted, and after the restart, the working state can be resumed after a while, and then the temperature can be adjusted.

Introduction to wall-hung boilers.

Wall-hung boiler is the abbreviation of gas wall-hung boiler, the full name is "gas wall-hung heating furnace", which is a kind of water heater with natural gas as energy, with anti-freezing protection, anti-dry burning protection, accidental flameout protection, excessive temperature protection, water pump anti-jamming protection and other safety protection measures.

The standard name of our country is: "gas wall-mounted rapid heating water heater", but it is not a gas water heater in the traditional sense, and it is fundamentally different from a water heater.

An external room thermostat can be connected for individual temperature regulation and energy saving. According to statistics, the use of room temperature controllers can save 20-28% of gas bills. From July 1, 2011, the new national standard GB25034-2010 for gas heating water heaters will be implemented.

Summary. It may be that the water pipe of the wall-hung boiler is blocked, or the water pressure is too low, at this time, the owner should first check the water meter display of the wall-hung boiler, if the water pressure of the wall-hung boiler is below 1bar, it proves that the water pressure is too low due to the lack of water in the wall-hung boiler, and the water pressure should be replenished to the wall-hung boiler, if not, it proves that the water pipe is blocked, and the owner should clean the water pipe. The low water pressure of the wall-hung boiler and the blockage of the filter screen at the water inlet will cause the wall-hung boiler to not ignite, and the wall-hung boiler will not be able to ignite when the wall-hung boiler is checked to not have enough water pressure.

Solution: At this time, check the water pressure first, adjust the water pressure, adjust the water pressure to between 1 and between, if it still can't catch fire, clean the filter screen, and then reopen the wall-hung furnace.

The Gangdis wall-hung stove is heated without fire.

It may be that the water pipe of the wall-hung boiler is blocked, or the water pressure is too low, then the owner should first check the water meter display of the wall-hung boiler, if the water pressure of the wall-hung boiler is less than 1bar, it proves that the water pressure is too low due to the lack of water in the wall-hung boiler, and the water pressure should be replenished to the wall-hung boiler. The low water pressure of the wall-hung boiler and the blockage of the filter at the water inlet will cause the wall-hung boiler to be unable to ignite, and the wall-hung boiler will not be able to ignite when the wall-hung boiler checks that the water pressure is not enough. Workaround:

At this time, check the water pressure first, adjust the water pressure, adjust the water pressure to between 1 and between, if it still can't catch fire, clean the filter screen, and then reopen the wall-hung furnace.

These are normal, domestic hot water fire, heating not fire.

The wall-hung boiler can not be ignited during heating, and the domestic water can be ignited, which may be due to the unstable water pressure of the tap water or the air in the water pipe, which can be solved by installing one-way felling at the tap water inlet end of the wall-hung boiler. When the ignition switch of the wall-hung boiler enters the working state, the fan starts first to form a negative pressure difference in the combustion chamber, the wind pressure switch sends the instruction to the water pump, and after the pump starts, the water flow switch sends the instruction to the high-pressure discharger, and the command is sent to the gas proportional valve after the mold is started, and the gas proportional valve starts to start. Gas proportional valves and air pressure switches, as well as flue gas induction switches, are interlocked.

When the flue gas induction switch does not detect the exhaust gas discharge in 5 seconds, the gas proportional valve will be cut off to stop the gas supply, and the safe use of the gas will be ensured from the mold section to ensure the safe use of the gas reputation.

There can be many reasons for the failure of the Gangdis gas wall-hung boiler, including power failure, pressure sensor failure, combustion controller failure, fan failure, gas valve failure, and many more. The specific type of fault can lead to different hot combustion, no heating, or safety issues. For example, if the power supply fails, the gas wall-hung boiler may not start or stop properly, while if the fan fails, it may cause the gas to fail to burn properly, resulting in incomplete combustion and safety hazards.

Therefore, when the gas wall-hung boiler fails, it is recommended to contact professional maintenance personnel for maintenance and maintenance in time to ensure the normal operation and safety of the gas wall-hung boiler.

There can be a number of reasons for the Gangdis wall-hung boiler**, but the main cause may be too high a pressure inside the furnace.

First of all, the gas system containing the Gangdis wall-hung boiler may have problems such as gas leakage, which causes the gas to be unable to burn completely, resulting in excessive gas accumulation in the furnace and increasing the pressure in the furnace. Secondly, the safety valve in the furnace may fail or be damaged, and the gas cannot be released in time, causing the accumulation of pressure in the furnace. In addition, the Gangdis wall-hung boiler that has been used for a long time or is not maintained for a long time has problems such as aging pipes and broken furnace body, which increases the risk of occurring.

In order to avoid the occurrence of safety accidents such as Gangdis wall-hung boilers, we need to carry out regular inspection and maintenance when using gas wall-hung boilers normally to ensure the safety of gas pipelines and prevent gas leakage and other flushing problems; At the same time, it is necessary to maintain the balance of pressure and temperature in the furnace to avoid the danger caused by excessive pressure. The most important thing is that in the process of using the gas wall-hung boiler, it is necessary to always pay attention to the instruction manual and the safety tips of the manufacturer, and operate in strict accordance with the regulations to ensure the safety and reliability of the furnace.