The probability of water entering the mobile phone card slot, is it impossible to use the mobile pho

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

After entering the water, it is recommended not to turn on the machine.

Use a hot air blower to evaporate the water in the phone, and leave it for a while before turning it on.

This can ensure that the moisture in the mobile phone can cause a short circuit in the mobile phone and damage the mobile phone.

If the mobile phone is flooded, it is recommended to disassemble the mobile phone to cool for two or three days before use, otherwise the water will remain on the motherboard to corrode the circuit, causing all kinds of problems, your situation should be caused by water corrosion or short circuit circuit, if you have the ability to disassemble and repair or disassemble it to take a look.

If you are using a Huawei phone.

To reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair, as continued use or repair at an unofficial service store may further damage the internal components. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.

Precautions after water and liquid ingress in the mobile phone:

1.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

2.Mobile phones are made of precision electronic components.

There is a potential risk after water ingress, so please keep your phone turned off.

3.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

4.If there is no backup data.

There may be a risk of data loss when repairing. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Boarding service. Huawei Customer Service Center.

Repair spare parts** inquiry.

You can totally give it a try, and if you can, then no problem.

Hello! In fact, you are already in too much of a hurry.

Originally, it was necessary to dry the mobile phone as soon as possible and put it in a sealed box, and at the same time, the industrial alcohol should be opened and put into a container, sealed and stored, so that the alcohol could absorb the water. Or after drying the water, wrap it in clean gauze and put it in a rice bag to let it release the moisture.

After Pai Lu quietly arrives at the water and dries it again, after taking it out, open the back cover of the mobile phone, and then use a hair dryer to blow it (pay attention to the safe temperature and use a cold windshield to blow it).

After wiping the wiring part of the mobile phone with dust residue industrial alcohol, wait until the alcohol is completely volatilized, and then use the mobile phone again.

According to your description, your phone is probably going to be repaired, and it may not be cost-effective.

Say that your mobile phone appears to be in the water to prepare for the imitation of the phenomenon, then the best way to deal with it is not to turn on the phone, put the mobile phone into your rice bag, use the dryer of the large peikumi rice, the water in the mobile phone is fully absorbed, and then take it out the next day and turn it on to use normally.

If the phone is flooded, there is a card slot that does not read the digging beam card. And the camera can't take pictures, and the rest can be used normally. The Hozakura mobile phone card was burned out due to a short circuit due to water ingress.

And the camera was also damaged. In this case, you can apply for a new mobile phone card. The camera is then repaired and replaced.

Immediately turn off the mobile phone after entering the water, immediately take the mobile phone to the mobile phone after-sales service or a more reliable mobile phone repair shop for maintenance, to see if it can be repaired, if the repair is not good, consider burying the flush to sell it, the mobile phone can not play **, it means that the problem is big, and the mobile phone is changed.

The phone is flooded, and currently only the card slot is read. The mobile phone is trembling in the water, only the card slot can't read the card at present, and the others are normal, how to deal with the water and grinding dust? Be sure to go to a professional maintenance point to open the back cover and let the master give it. Use a hair dryer to dry it, and then start it again.

As soon as the water enters, only the card slot can not read the card, and the others are normal, how to deal with it? Rent Hong, you cheat with the book to take the mobile phone to that, your mobile phone monopoly department to repair a repair, repair a repair, repair a repair, if it doesn't affect the big problem, the others ask you to use it normally.

The mobile phone is absolutely watered, only the card slot can't read the card, and the others are normal, how to deal with it? In this case, you don't have to think about dealing with it yourself, or hand it over to the customer service of the mobile phone to repair it, after all, people are professional, and if you don't replace the zero car rock or something, there is no charge for repairing it, why do you have to tinker with it yourself.

The machine is flooded with regrets, only the card slot can not read the card at present, the others are normal, how to deal with the mobile phone into the water? Then you blow it out with a hair dryer, dry it and everything is fine!

This is easy to do, directly in the repair of electrical appliances, ask the master to show you a Kaihan to see, noisy Han generally they understand this aspect, at a glance they know what the problem is, and it will be solved for you in a while.

The mobile phone is flooded, only the card slot can't read the card at present, everything else is normal, how to deal with it? In the case of such infiltration, we can't handle it ourselves, and we will take it to the designated maintenance place of the mobile phone, and let them open the stool and call Lu to take a look.

The mobile phone is flooded, only the card slot can't read the card at present, the others are normal, how to deal with it? In this case, you can take it and fix it, it may be fine.

The phone is flooded, only the card slot can't read the card at present, the others are normal, how to deal with it? I think you should go to the shop that repairs your phone, and let him go and show you the silver side, what should I do? Edge Oak.

Hello dear, the motherboard of the mobile phone is damaged by water and needs to be repaired as soon as possible. If there is water in the card slot of your mobile phone, and there is a "no service" situation after inserting the card, it may be caused by moisture and corrosion. Here are some workarounds to try:

1.Wipe the SIM card and card slot thoroughly and try to insert it again. 2.

Keep your phone in a dry place and wait for a few hours or a day. Try reinserting the SIM card and see if that fixes the issue. 3.

Use a dehumidifier bag and put your phone in it for about a day. Then try to reinsert the SIM card and see if you get back to the tie-in issue. 4.

If the above methods do not work, please contact the phone manufacturer or repair center for further help. The SIM card slot may need to be replaced or other repairs may be required. The best way to do this is to try to avoid water on your mobile phone to avoid this kind of problem.

Summary. Dear, I'm glad to answer for you: the mobile phone card can still be used if it is blistered.

A mobile phone card is an encapsulated chip, which is waterproof. After the mobile phone card is blistered, as long as it is not soaked for too long, resulting in corrosion of the contact plate, the mobile phone card can still be used. Before use, the mobile phone card must be wiped dry, and if possible, you can use a hair dryer to blow it on a low level to ensure that the mobile phone card is dry.

Dear, I'm glad to answer for you: the mobile phone card can still be used if it is blistered. A mobile phone card is an encapsulated chip, which is waterproof.

After the mobile phone card is blistered, as long as it is not soaked for too long, resulting in corrosion of the contact plate, the mobile phone card can still be used. Before use, the mobile phone card must be wiped dry, and if possible, you can use a hair dryer to blow it on a low level to ensure that the mobile phone card is dry.

Kiss, expand for you: How to use the mobile phone card blistered in the water, stop using it immediately, and then take a hair dryer to dry it and take a paper towel to wipe the water on the surface thoroughly. 2.

After drying, it is best to dry it for two or three days before installing and using it, in case there is still moisture inside. 3.The card of the mobile phone is not so easy to break if it gets into the water, as long as the water is dry.