-
Anonymous users2024-02-09You can try entering the IP address manually.
-
Anonymous users2024-02-08Do you have your own network or a network that you are connected to through a router? It is recommended to restart the modern router, restart the computer, and try it to see if it works!
-
Anonymous users2024-02-07In the network management that adds the next network protocol.
-
Anonymous users2024-02-061) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.
2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. After there is a factory reset, it can be used from the new settings (this is under the premise of the correct physical connection, sometimes it is caused by the router finding the IP address is slow or failing, not that the router is broken).
If it can't always be solved, it is recommended to call the customer service of the router, they have **** guidance, I encounter problems that I can't solve, it is very useful to consult the advice they give, and they will give correct suggestions for your settings or high.
3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.
4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.
Use the system that comes with the system restore method:
The system comes with the system restore: "Start" "Programs" "Accessories" "System Tools" "System Restore", click "Restore my computer to an earlier time", press Next, you will see that the date page has a dark date, that is the bend contains the restore point, after you select, click the next step to restore (win7810 restore the system, right-click on the computer to select attributes, on the right side to select system protection, system restore, follow the steps to do it, if there is restoration software, you can also use the software to restore the system).
5) If you have any questions, please ask me.
-
Anonymous users2024-02-05Check whether the network card driver is installed, the protocol is said in the previous DOS system era, and now it's all Windows, and there is no such operation.
-
Anonymous users2024-02-041, this can be repaired directly with PC Manager 2, open the toolbox, find that there is a network repair option, directly to the computer's network repair.
-
Anonymous users2024-02-03Revert to the last normal point in time.
-
Anonymous users2024-02-02Right-click on the network neighbor --- menu, select the properties --- or right-click the local connection--Zhichangguang Pile Gap, including the picture--- menu, select the properties--- click the install button--- select the protocol--- click Add--- select Microsoft--- select the installed protocol....
Based on your description, first of all, it is preliminarily determined that this is a home network, then it is connected through the PPPoe protocol. Are there two routers you're talking about? One is wired by, and the other is wireless routing? >>>More
You are connected through the local area network, first of all, see if the other computers in your network can be connected to the Internet, if you can't connect to the name of the server or router, if you can't see your IP, gateway, DNS, subnet mask, whether the settings are normal, if they are normal, disable the local connection first, start the local connection after restarting the computer, change the individual IP number, the front number does not need to be changed to the back number on the line, change the question mark (** number range between 1--255, Any number will do. After the change, as long as the network IP is not prompted, it is fine. Then try to see if you can connect to it, if it doesn't work, use the latest version of the antivirus software to kill the virus in DOS, generally do the above procedures can solve the problem, if it doesn't work, it's time to check your hardware connection.
According to your description, your network failure comes and goes, first of all, don't use the router, dial directly to see if it is normal, if it is normal at this time, it may be a problem with the router, you can consider replacing the router, if you dial directly, or so, it should be a network failure, it may be a poor line contact, it is recommended to call **to your network** business, let him arrange someone to check the line.
There is a label on the reverse side of the wireless router that will have the login IP address of the route and the default administrator and password, if you have changed it before, and now you have forgotten it, or it has always been the correct solution, but you can't enter the routing ......Please restore the default factory value of the router, press and hold the reset key for about 10 seconds, look at the indicator light in front of the route, the indicator will bounce and restart, and then enter the route, the default of the general route is or. >>>More
This needs to set the IP address of the network card, you ask what the IP gateway of your neighbor is and then remember to set the DNS If the computer does not have the network card after repair, you have to right-click on the online neighbor, properties, and then see if there is a local connection, if there is no local connection, it means that your new motherboard does not have a network card.