The VLAN tag is removed when the kernel is still driven by the network card

Updated on technology 2024-05-06
7 answers
  1. Anonymous users2024-02-09

    Here's how to do this: Method 1: Update the NIC driver.

    1. Find My Computer on the desktop.

    2. Right-click Device Manager.

    3. Find the wireless adapter, click, the driver appears and then right-click to update.

    3. Run the software, the software will automatically start the detection, and the matching network card driver will be automatically installed after the detection is completed.

  2. Anonymous users2024-02-08

    Attach the LAN port when entering the switch and remove it when the LAN port exits. The host will not be aware of this part of the tag in the data

  3. Anonymous users2024-02-07

    1.VLAN processing mainly depends on the NIC itself.

    2.The NIC handles VLANs.

    VLAN tag insertion and removal are all done by the network card.

    VLAN packets are filtered by the NIC.

    The Linux protocol stack registers VLAN-related information through interfaces in the driver.

    The driver then writes this information to the chip.

    Therefore, the NIC driver receives packets from the NIC receiving queue without a VLAN tag.

  4. Anonymous users2024-02-06

    What operating system? SUSE or OpenSUSE can be done with yast.

  5. Anonymous users2024-02-05

    Although about 80% of the traffic occurs within VLANs, about 20% of the traffic still crosses different VLANs. At present, router technology is mainly used to solve the communication between VLANs. In general, two routing strategies are used for Qingxiao communication between VLANs, namely centralized routing and distributed routing.

    The NIC does not strip the VLAN:

    1. Use a centralized routing strategy

    A centralized routing policy means that all VLANs are interconnected through a central router. For two ports on the same switch (generally referred to as a Layer 2 switch), if they belong to two different VLANs, even though they are on the same switch, the route is also selected through the central router when data is exchanged.

    2. Use a distributed routing strategy

    The distributed routing strategy is to appropriately distribute the routing function family on the switch with routing function (referring to the Layer 3 switch), and different VLANs on the same switch can directly communicate with each other, which has the advantages of extremely high routing speed and good scalability.

  6. Anonymous users2024-02-04

    It is recommended to reinstall the network card driver.

    url]

  7. Anonymous users2024-02-03

    Reboot and then reinstall.

    When installing, it prompts that the installation driver must be selected to continue.

    If you also have win7, you have to run it as an administrator!

Related questions
7 answers2024-05-06

There are a few common reasons why your broadband network is slow: >>>More

31 answers2024-05-06

Each has its own well.

Face-to-face classes: Face-to-face classes are a good form of teaching, but sometimes there are some drawbacks. >>>More

10 answers2024-05-06

Let's first understand the concept of pools.

The key to the so-called "capital pool operation type wealth management product" lies in the "capital pool", which means that the issuing institution (generally the bank) will collect the customer wealth management funds raised to form a large "pool", which will be operated and managed in a unified manner. The new funds are the incremental water remitted, and the funds paid (or redeemed) at maturity are the outflow water, and so on, and so on, for uninterrupted liquidity management. >>>More

15 answers2024-05-06

Turnip and cabbage have their own loves, just like some people like to eat roadside stalls, and some people like to go to big hotels. I applied for the Tiandao online course, **low, convenient classes, teachers are guaranteed, and if the consciousness is not good, it is not recommended. The postgraduate entrance examination cannot completely rely on the tutorial class, no matter how good the teacher says, you have to digest and absorb it yourself, which will help you, and it is still unrealistic to rely only on the tutorial class.

10 answers2024-05-06

Now most of the ** can be judged by the suffix of the file name, i.e. except. html and. The web pages at the end of htm are all dynamic web pages, but big web pages like baidu must be used, but the display is a static format, which is also a more popular way now, that is, in the dynamic ** on the server side to generate a series of static ** for customers to browse, and then use dynamic language to modify and update the static web page, this ** has a higher security factor.