The first step in the advanced gameplay of the Rubik s Cube is how to restore the messed Rubik s Cub

It's the same as the first step to get started with a ticket.

If you want to restore the messed Rubik's Cube, you must first understand the formula of the Rubik's Cube, as long as you master the recipe of restoration, you can restore the Rubik's Cube in any state to its original state.

The specific restoration method of the Rubik's cube (taking the third-order Rubik's cube as an example):

1. Return to the bottom edge: choose a color surface as the bottom surface, make a cross at the bottom of the Rubik's cube, and then spell out a cross on each surface, first spell the first layer, and the cross must be correct, and the color of the four edges of the cross must be consistent with the color of the center block on the front and back.

2. Return to the bottom corner: restore the four corner blocks of the first layer of the Rubik's Cube.

3. The second layer of edges is in place: restore the four edges in the middle layer of the Rubik's Cube.

4. Top edge position: At this time, it depends on what the situation of the Rubik's Cube in the hand is, if it is a "point", after doing the action step of the top edge position, it is a "small turn", and the top layer should be adjusted to the correct direction, and then do the action step of the top edge position, and so on, until the top layer of color is restored to a cross.

5. Top corner position: make the top surface color of the four top corners of the Rubik's Cube all adjusted to the top surface.

6. The top edge is in place: make the color of the other side of the four top edges of the Rubik's cube the same color as the color of the other four sides where it is located.

7. Apex corner homing: make the other two sides of the four top corners of the Rubik's Cube that have been faceted in the same color as the color where the corresponding face is located. After the whole adjustment is made, you will find that the Rubik's Cube has been restored.

First, put the white block in the middle against it.

2.Then make a white cross at the top, that is, the blocks of other colors are in their corresponding positions, and then return the white corner blocks to their respective positions.

3.Then return the middle edge block, turn the white side downward, find the red and green edge blocks, if the red and green edge blocks are on the top layer, then rotate the top layer in a clockwise direction.

4.Then turn the Rubik's Cube according to the mantra to return the side blocks to their positions.

The bottom edge is in place, choose the white side as the bottom surface, and set a cross on the bottom layer of the Rubik's Cube. The reduction edge is to spell out a cross on each face. Pay back one layer first, that is, make a cross on one side. The color of the four sides of the cross must be the same as the color of the center block on the front, back, left, and right.

2.Bottom corner homing.

Restore the four corner blocks on the first floor of the Rubik's Cube.

3.The second layer of edges is homecoming.

Restore the four edges in the middle layer of the Rubik's Cube.

4.Top edge bit.

It depends on the condition of the Rubik's Cube in your hand, such as the "point": after this action is done, it is a "small turn", then you need to adjust the top layer to the correct direction and then do this step, and so on, until the top layer of yellow is restored to a cross.

How do you ask questions? White cross.

Adjust the top color of the four top corners of the Rubik's Cube to the top surface.

6.The apex is in place.

Make the color of the other side of the four top edges of the Rubik's cube the same color as the color of the other four faces in which it is located.

7.Top corner homing.

The other two sides of the four corners of the cube that have been placed are also the same color as the corresponding faces. Questions!

Magic Revealed: Teach you how to restore a Rubik's cube in an instant, and learn this magic trick in 30 seconds.

The simple tutorial for the recovery of the Rubik's Cube is as follows:

Material preparation: third-order Rubik's Cube.

Operation steps: 1. First prepare a shuffled Rubik's Cube.

2. Then restore the bottom of the Rubik's Cube, that is, the same color is the bottom, and the bottom layer of the four reeds is the same color.

3. Put the side of the same color at the bottom, and then the color in the middle of the second layer of the four sides corresponds to the same color as the bottom layer.

4. The two colors exposed in the middle of the top layer correspond to the two sides of the second layer.

5. Then according to the formula, go down left, left, down, right, up, right, or down, right, down, right, left, up, left, and restore each side of the second layer to the same color.

6. In accordance with the formula, the front right, the upper right, the upper left, the lower right, the upper right, and the front left form a cross.

7. According to the formula, upper right, upper left, lower right, upper left, upper right, upper left, upper left, lower right. Unify the color of the top layer.

8. According to the following two formulas, restore the four corners and four corners of the top layer to the same color. Upper right, back right, upper right, front right right, lower right, back left, upper right, front right, upper right.

9. According to the formula, restore the top layer, upper right, upper right, upper right, upper left, upper right, upper left, upper right, upper right, upper right, upper right, so that the Rubik's Cube is restored.

The method of reverting the scrambled Rubik's Cube is as follows:

Step 1: Understand the structure of the Rubik's Cube.

The Rubik's Cube consists of 27 small cubes, each of which has a different color. The internal structure of the Rubik's cube is fixed, and is generally determined by the position and direction of the color blocks. Therefore, we need to understand the structure of the Rubik's Cube before we can better restore it.

Step 2: Solve a polygon.

First of all, we need to completely restore one of the faces on the Rubik's Cube. This can be achieved by putting small cubes of the same color together and then adjusting their position and orientation one by one. In this process, we need to learn how to move different levels of the Rubik's cube, including left and right, up and down, front and back, etc.

Step 3: Solve both sides.

Once we have successfully solved one polygon, the next thing we need to do is to solve two more adjacent polygons. This usually requires some special skills, such as the "cross method" and the "F2L method". These methods can help us find the right move steps faster so that we can solve the Rubik's Cube faster.

Step 4: Solve the three faces.

After we have successfully solved two faces, we need to solve the last one. This is usually the hardest step, as we need to consider the position and orientation of multiple color blocks at the same time. In this process, we need to pay attention to maintaining the correctness of the first two faces, so as to avoid the situation that the front faces are wrong after restoring one face.

Step 5: Adjust the Rubik's Cube.

Finally, we need to adjust the Rubik's Cube so that it is completely restored. This process may require some special techniques, such as the "OLL method" and the "PLL method". These methods can help us quickly find the right move steps to complete the recovery of the Rubik's Cube faster.

In short, although it may seem difficult to break the Rubik's Cube, as long as we master some basic skills and methods, we can complete its restoration in a very short time.

1. Return the bottom edge, choose the white side as the bottom surface, and set up a cross on the bottom layer of the Rubik's Cube. The reduction edge is to spell out a cross on each surface, and the cross is not according to the surface, but according to the layer. Return the first layer first, that is, spell out a cross on the first side.

This is very simple, but the cross must be spelled correctly, that is, the color of the four edges of the cross must be consistent with the color of the center block of the front and back, left and right.

2. The bottom corner is in place, which is the four corner blocks of the first layer of the original Rubik's Cube of the Fuge Sail Core.

3. The second layer of edges is the step of restoring the four edges in the middle layer of the Rubik's cube.

4. The top edge position, when doing this step, it depends on what the situation of the Rubik's Cube in your hand is, such as the "point": after doing this sedan chair action step, it is a "small turn", then you must adjust the top layer to the correct direction and then do this step, and so on, until the top layer of yellow is restored to a cross to restore the fourth step of the Rubik's Cube is completed.

5. The top corner position is to adjust the top surface color of the four top corners of the Rubik's Cube to the top surface.

6. The top edge is in place, so that the color of the other side of the four top edges of the Rubik's Cube that has been in place is the same color as the color of the other four sides that are envied. Step 6 of the order of the top four corners of the cube is complete.

7. The top corner homing is to make the other two sides of the four top corners of the Rubik's Cube that have been placed in the same color as the color of the corresponding face.

Here's how to restore the shuffled Rubik's Cube:

When facing this problem, we can use the following steps to deal with it: The specific method of restoring the Rubik's Cube will be described in detail below.

1.Locate the center block

The six central blocks of the Rubik's Cube are fixed in color, which is the best part of the restoration process to determine. You can find one of the colors in front of the Rubik's cube, turn the cube to a clockwise or hail-only counterclockwise direction until the bottom surface can exactly correspond to the top surface, then the position of the center point of the model is found.

2.Step by step method to restore the Rubik's Cube

This method restores mainly from smallest to largest based on the step size level. First of all, determine one color as the starting point of restoration, and the remaining five colors need to be adjusted accordingly. Next, there are different ways to rotate the module for different restore steps.

3.Create your own reduction formula

Writing your own reduction formula, which is a more complex method, requires a more familiar understanding of the movement of the Rubik's Cube, and is more suitable for experienced Rubik's Cube enthusiasts. According to the Rubik's Cube reduction process, try to summarize and summarize the laws and form a scientific reduction formula, which is the most anticipated tutorial for Rubik's Cube enthusiasts.

4.Seek professional help

If the above methods still do not meet your requirements, you can find experts, teachers or enthusiasts in the field of Rubik's Cube, ask them for advice, and get more professional guidance and advice. You can find many like-minded friends by joining the Rubik's Cube community, participating in activities and exchanges.

Summary: The above are the four main methods of restoring the scrambled Rubik's Cube, among which the step-by-step method is the most widely used, relatively mature and highly applicable method at present. Successfully restoring a Rubik's Cube requires some time, skill and patience.

As long as you overcome the difficulties, when you successfully complete the restoration of a chaotic Rubik's Cube, your sense of accomplishment and excitement will surely fill your whole mind.

The easiest way to restore a shuffled Rubik's Cube is as follows:

The Rubik's Cube is a classic intellectual toy, which has good challenge and playability, and is deeply loved by the majority of players. But when we mess up the Rubik's Cube, how do we get it back? Here's one of the easiest ways to restore a Rubik's Cube. Noisy reed.

First of all, we need to know the structure of the Rubik's Cube. The Rubik's Cube consists of 3 x 3 squares, each with 6 faces, each of which is of a different color. The Rubik's Cube has a pivot that can be rotated.

There are usually many ways to restore the Rubik's Cube, but the simplest of them is the "10-step method", which is roughly as follows:

Step 1: Restore the top cross

Move the color squares that cross the middle of the upper and lower layers of the cube to the center, and then adjust the outer corners of the four layers to the corresponding positions and align the center faces. To do this, turn the Rubik's Cube to a state with slashes, find the color of the top center square, and face the non-top surface of the 4 adjacent squares at the top to the center of the Rubik's Cube, and then follow the steps below to rotate the Rubik's Cube to restore the top cross

Align the edge block above the top center square with the same color side of the center block, and turn the top layer to the right on the right-hand side to align it.

Place the rotated layer back in place, then align the right center square with the original opposite place, and rotate the top layer to align it as well.

Continue to rotate the left and rear center squares to complete the reset of the top cross.

Step 2: Restore the top corner block

In this step, we need to find the correct position of the top four corner blocks and place them in the corresponding positions. To do this, first find the "T" shape formed by the 3 correct adjacent blocks on the top. Then, rotate the Rubik's Cube by following these steps to place the incorrect corner blocks in the corresponding positions:

Rotate the upper and lower surface of the Rubik's Cube (do not rotate the top) so that the corner block that needs to be restored is already at the bottom right (as shown in the example figure), the upper right corner block needs to be placed on the upper left, and the upper left corner block needs to be placed on the lower left, and you can operate. If two of the corners are in the correct position, you can restore the other two corners first.

Rotate the Rubik's Cube counterclockwise, then use your left thumb to hold the correct corner block at the top, and turn the top layer counterclockwise to adjust the incorrect corner block to touch it. At this point, the correct block position changes to the top left.

Rotate the layer of the cube to the right, and use the second step to return the other three incorrectly positioned corner blocks.

Step 3: Restore the middle layer

This step is to restore the middle layer. Locate a complete face of the middle layer and do the following:

rotate the intermediate layer edge block that needs to be homed below its normal position;

Turn the bottom layer to the left, and then rotate the entire Rubik's Cube 180 degrees downward;

Finally, turn the bottom layer to the right to complete the restoration of the middle layer.