How to play the Mirror Rubik s Cube?? Tutorial on the last layer of the Mirror Rubik s Cube

The restoration steps of the mirror Rubik's cube to apply the third-order Rubik's cube gameplay:

1.Bottom cross (cross).

2.Finish the underside and form a T-shape on all four sides.

3.Complete the second floor.

4.Top cross (whether it's in the right position or not, as long as it's all.)"pour"Just come down)

5.Top direction (bring down all the corner blocks on the top surface).

6.Top corner block homing (already.)"pour"If you come down, you don't have to worry about getting up, the same below) (this step is divided into two small steps: first let the two outer corner blocks of one side return to position, and then let the other two corner blocks return to place).

7.The top edge is in place.

If you can't finish it yet, you just have to remember:

There is no need to look for formulas everywhere, what pll formulas, blind twisting angle formulas, you only need to use ordinary third-order introductory solutions, such as:

Corner block homing formula l f' l b2 l'f l b2 l2, use it once and there will be a pair of corner blocks homing.

Then place the pair of corners that have been returned to your back, repeat again, and the 4 corners will be done.

If the position of the 4 edges is wrong, please use the following formula (any one is sufficient).

Clockwise formula: l u l' u l u2 l'

Counterclockwise formula: r' u' r u' r' u2 r

At this point, one of the edges has been returned to its position.

The remaining three edges, if they are arranged in a clockwise direction, use the above clockwise formula first, then turn the whole Rubik's Cube 90 degrees clockwise, and then make a counterclockwise formula; Finish.

If it is arranged in a counterclockwise direction, first use the above counterclockwise formula, then turn the entire Rubik's Cube 90 degrees counterclockwise, and then make a clockwise formula; Finish.

At this point, your mirror cube is all done!

The mirror shaped Rubik's cube is different from the traditional 3-order 6-color Rubik's Cube, the traditional 6-color Rubik's Cube is a different color from the top and bottom, left and right, and the front and back. The mirror Rubik's Cube, all the blocks are silver, the whole Rubik's Cube has only one color, and the irregular cutting makes each of its pieces have a different shape, and in the process of restoration, we use different shape blocks to determine the position it should return to.

Different from the traditional Rubik's Cube, the mirror Rubik's Cube will show many strange shapes due to the different shapes of the blocks in the process of rotation. Of course, as long as the location of the block can be determined, as long as you can restore the traditional Rubik's Cube, then it is not difficult to restore the mirror Rubik's Cube.

If you know how to play the third-order Rubik's Cube, when you play the mirror Rubik's Cube, use the thickness of each face as the color, and you can play it the same as the third-order Rubik's Cube.

It's the same as the third order, except that you don't look at the color and look at the size.

Mirror Rubik's Cube Tutorial 1, the first step is Huang Xiaohua.

1. Restore the mirror Rubik's Cube.

The last layer of white cross tutorial: (first find the longest (high) center block is white, the shortest (low) center block directly opposite is yellow, the low center block is facing up, and the high center block is facing down).

1. Make yellow hearts and white flowers on the top surface (find the 4 edges of the longest block to imitate the white edges, and the small side is white).

a. The longest edge is in the second layer: turn directly up.

b. The longest edge is on the first or third layer: clockwise in the front layer.

Go to the second layer and follow scenario a.

c. The longest edge is at the bottom: turn it up twice.

Note: If there is a white edge on the top surface, turn it to the upper layer to make a move).

3. Make a white cross on the bottom surface, with the yellow heart and white flowers facing up: the side of the long edge block is large and aligned with the center block (the height is the same flat), go down to the bottom, and the same method until the 4 long edge blocks are turned to the bottom. ** Move the bottom layer so that the edges at the bottom are as flat as the height of the center block).

2. Tutorial on the last layer of the large corner block of the mirror cube (the smallest of the 3 sides of the large corner block is white).

1. Turn the big corner block to the right side of the third layer, and the big corner block is as flat as the middle block.

a. The minimum face faces right: up and down left.

b. The minimum face is facing forward: upper left and lower right.

c. The smallest face is facing up: upper left, lower left, lower right, upper left, lower left.

2. The big corner block is at the bottom: top and left, turn the big corner block to the right side of the third layer, and then do it according to the situation above ABC. (bottom and center block height aligned).

Mirror Cube Tutorial:

1. Make the cross first, and make the smallest block cross first. Once you've got a chaotic mirror cube, test the height of the center block with your fingers, with the largest block at the bottom and right, and the smallest block at the left and top. Find the longest center block, facing down, to make the bottom.

Then find the longest edge, a total of four, turn downward, that is, the bottom cross restoration.

2. After restoring the smallest plate (the last row), this method is to use the "bottom corner block homing method" to find the thinnest 4 corner blocks, so that the four sides of the edges form the "T" word is also completed, and the thickness of the corner blocks must be correctly identified, so that it is convenient to operate.

3. Then restore the second layer (that is, the edge that is not big or small, the middle layer). Fix the bottom and second floors, and rotate the top layer first. When you turn to a certain edge and the thickness of the center block, observe its size and whether it is a two-layer edge that belongs to this surface.

If yes, it will be restored according to the third-order formula. If the edges are in the right position on the second layer, facing the wrong direction, replace them and then load them in reverse.

After this layer is gradually restored, the top surface restore begins. Using the "middle layer prismatic homing layer method", find the 4 middle layer edges according to the thickness of the edges, if the position of the edges is wrong, the formula on the right side of the edge is five inverses and five straights, and the formula on the left is five straight and five inverse.

4. After that, the top surface is turned over and the largest cross is flattened. You should pay special attention to one point. The corner block can only be transposed with the corner block, the edge block can only be transposed with the edge block, and the center block cannot be moved.

5. The next step is to flatten the top. When operating the top floor, you must be careful not to disturb your thoughts, and your sense of direction must be good.

6. After that, align the four corners of the top surface. The top layer adopts the "top cross method", and the formula of three forward and three reverse is adopted according to the thickness and size of the edge.

7. After the four edges and corners of the top surface are restored, the restoration of a mirror Rubik's Cube is completed.

Introduction to the Mirror Rubik's Cube:

The mirror Rubik's Cube belongs to the special-shaped Rubik's Cube, which is a variant of the third-order Rubik's Cube, its six sides are the same color, but the thickness is different, and the most important reduction method is the same as the third-order Rubik's Cube.

Question 1: How to spell the mirror Rubik's cube The method is exactly the same as the third-order one, but the mirror cube is just a shape. You can first determine a prism at the bottom layer, then memorize its shape, and then use it as a basis to spell it according to the formula of the third-order Rubik's Cube.

Question 2: How to spell the mirror Rubik's Cube Will you restore the ordinary third-order Rubik's Cube? ......If you do, then mirror restoration is not a problem for you at all.

First of all, you need to be sure that you will be able to restore the mirror surface. When you first start working with the mirror, you tell yourself to ignore all the irregularities in its block and restore it as if it were an ordinary third-order Rubik's cube. It is recommended to use the basic gameplay of the third order:

Layer-first method. If you still have questions, please go to the Rubik's Cube station, which has a detailed tutorial from the stationmaster. Hope to help you.

Question 3: How to spell such a mirror Rubik's cube I also have one at home I won't buy it to play with at that time, but it should be the same as the ordinary Rubik's cube There is also a formula When I bought it, the seller said no, you can find him to teach and learn for free.

If you don't know if your seller can, you can ask him and learn from him directly.

Question 4: How to spell the six sides of the mirror Rubik's Cube with the third-order Rubik's Cube, that is, the first step is different, he does not make a cross, but finds a minimum block as the base block, and then restores the bottom surface one by one, and then the third order is the same.

Question 5: How to assemble six sides of the three-section mirror Rubik's cube The same as the third-order Rubik's Cube, that is, the first step is different, he does not make a cross, but finds a minimum block as the base block, and then restores the bottom surface one by one, and the back is consistent with the third order.

Question 6: How to put together the third-order mirror Rubik's Cube? The third-order mirror Rubik's Cube is the same as the third-order Rubik's Cube, and the Rubik's Cube is the same, if you know the third order, it's good, try to treat the thinnest side as a white vertical high color surface, and fight slowly, if you still can't, you can go to find a tutorial, Youku Search Sun Hongye Rubik's Cube has a tutorial, or a small Rubik's Cube station.

Question 7: How to put together the thinnest side of the mirror Rubik's Cube is actually not restored as you understand, but layer by layer. First restore the bottom cross, let the back restore one layer and then two layers, then the top layer Lu Min, and then restore the entire Rubik's Cube.

Question 8: How to spell back the third-order mirror Rubik's Cube This is difficult to say, simple and simple, this Rubik's Cube also has its own formula, if you understand it, it can be easily restored, and if you can't understand it, it's the opposite.

Question 9: How can the mirror Rubik's Cube be put together It is good to put together a third-order Rubik's Cube, because each piece is different. In fact, after discovering this, I felt that the mirror was boring.

The mirror cube tutorial is as follows:

1) First of all, you should be familiar with the structure of the mirror and the location of the different shapes of Rubik's cubes. This makes it much easier.

2) Same as the ordinary third-order Rubik's Cube, for example, the white side of the ordinary third-order Rubik's Cube, now it is ready to be replaced with a mirror Rubik's Cube, and we also build one layer first (according to my personal habit, the higher side first. Let's talk about it specifically: according to the method of third-order imitation, first put together the cross, and let the four pieces except the center block correspond to the center block on all four sides, such as **.

3) After completing the previous step, there are only four corner blocks left, and you can follow the method of the third-order Rubik's Cube, which is very simple. If you don't know the third-order Rubik's Cube, then study it yourself, there is no specific formula for this step.

4) Step up, we have completed the first floor and one side, now complete the second layer. Find it first"t"If the top block should be moved to the right (where the arrow points to) follow the formula: up, right, up, right, right, up,

5) After completing the two layers, start to spell the top cross, the formula: forward straight, right up, up straight, right down, up reverse, front reverse. If there are three pieces in a row on the top floor, place them horizontally so that the cross can be completed by doing the formula once.