I bought a mobile phone case and gave a film, can I paste it myself? Will there be bubbles?

If you are careful, stick it yourself, wipe it clean to remove dust and oil stains and then paste it, tear it in order, if you are afraid of blistering, you can take a bank card and press it while sticking, and it will not blister.

The bubbles are small and dusty, and if you get the dust in them, and then you get it around, then there will be both dust and bubbles.

If you don't post it yourself, ask a friend to post it for you! When pasting, you should distinguish the front and back! When pasting the screen and touching, there can be no dust particles, filaments and the like, and the screen is best scrubbed with alcohol. If there is dust, there will be no bubbles.

You can paste it yourself, wipe the phone clean when you paste it, and then put the film on it, and slowly press it down with your hand, I used to go out to paste it, and now I paste it myself, 5 yuan for a film, and paste it myself.

It's better not to post it yourself, I've posted it myself, a lot of bubbles, not professional, you will regret it if you post it yourself.

Follow the prompts to post it yourself and try it Generally, there will be bubbles for the first time Look at your hand knocking unfortunately, it doesn't matter if the paste is broken, the quality of the film sent is definitely not good, buy a mobile phone film, and others will help you paste it for free.

If you can't paste it yourself, there will be bubbles no matter how you paste it. I posted it myself! If you don't stick it well, you need professionals and tools.

Yes, as long as your technique is good, there are no bubbles.

You can't post it, and it will bubble.

If you have professional tools, you won't, and there will still be bubbles on the hand stickers.

Find someone to post it, you may have bubbles if you haven't posted it.

To master the method, you have to push forward like rolling the wrappers so that there are no bubbles.

It's up to you! I'm from the computer city! I have my own mobile phone store! I usually sell an average of three or four phones a day! Every mobile phone film is pasted by me!

Use a makeup brush to brush a little bit of loose powder or powder on the phone case, even prickly heat powder, you can try it, it's very good.

Be careful to stick it and stick it all the way!

One is born, and the second is ripe. Sister, you boldly walked forward......

There are a lot of bubbles in the mobile phone film, and the bubbles can be scraped out with a hard card, if the hard card is not clean, you can use the dust on the mobile phone film to stick it clean and then paste it. The following describes the specific operation methods for reference, first prepare the materials: the mobile phone that has just been pasted with the mobile phone film, the hard card, and the tape.

<>3. After scraping the bubbles on the mobile phone film to the edge, scrape the bubbles out vigorously, if there is no dust on the mobile phone film, you can scrape the bubbles clean in this way.

4. There is dust on the mobile phone film, and the tape is attached to the mobile phone film.

5. Pull up the mobile phone film, and then use tape to stick the dust clean.

6. Done. <>

1. The glass is uneven, resulting in the tempered film of the mobile phone.

It can not be in contact with the mobile phone screen, this situation generally appears on the hot-bending tempered film and the cold-carved tempered film, the small tolerance can be squeezed out by the extrusion method, and the tolerance is too large is a defective product.

2. The dust on the mobile phone is not cleaned or there are bubbles caused by dust in the tempered film of the mobile phone itself, which generally cannot be removed.

3. AB glue.

If it is not flattened, the bubbles in this case can be removed by squeezing.

Summary. Hello dear to you. The tempered film that has just been pasted will bubble up as soon as you put on the phone case:

It is when the mobile phone is filmed, the mobile phone screen is not wiped clean, resulting in the generation of bubbles. When applying the film on the phone, use alcohol to wipe the screen of the phone completely, including dust. before the film can be applied completely.

When the mobile phone is filmed, dust falls on the screen, which will cause bubbles to appear in the mobile phone case.

Hello dear to you. The tempered film that has just been pasted will blister when you slip on the mobile phone case: when the mobile phone is filmed, the mobile phone screen is not wiped clean, resulting in bubbles.

When applying the film on the mobile phone, Qinghao uses alcohol to completely wipe the mobile phone screen, including dust. before the film can be applied completely. When the mobile phone is filmed, dust falls on the screen, which will cause the mobile phone case to appear and the reputation is disgusting.

Hello dear to you. The bubble of the mobile phone film is because the bubbles in the mobile phone film are not completely cleaned, resulting in a little expansion, and the complaint will gradually spread. After the mobile phone film is pasted, it is repeatedly rolled out and squeezed out of the bubble, which will prevent the situation from happening later.

There are bubbles in the mobile phone film, which will not cause substantial harm to the mobile phone, but it will affect the overall aesthetics, and when used in the future, the bubbles will also appear blurry, and even produce light reflection, so try to avoid bubbles when sticking the film, the following is the treatment method for the bubbles;

Clean up the dust and grease from your hands first, and wash them off with hand sanitizer first.

1.Use a glasses cloth or a soft cloth that does not shed hair to wipe the surface of the mobile phone with a small amount of water, and clean the dust and fingerprints on the surface.

2.Peel off one side of the protective film, then align the phone and align the top and left sides to attach the lower film.

3.When applying the film, try to maintain a uniform speed, and pull back less when bubbles appear to ensure that there are no bubbles on the surface of the film. Then use a wool felt scraper, or a padded scraper, to avoid scratching.

Slowly press the film little by little on the surface of the phone, in this case, there will be few bubbles instantly.

4.After the pasting, the bubbles in some areas are repaired. Wrap the credit card with a hard card, credit card, etc., with the soft cloth that just wiped the screen, and then slowly exert force to scrape the bubbles out of the edges.

5.If there are small dust particles on the surface, peel off the area where you are located, glue the particles with adhesive tape, etc., and then attach the film to it.