Can OnePlus phones be used under the existing 4G network

For OnePlus mobile phone 4G network settings, you can try the following steps: 1. Make sure that the 4G** card has been replaced and the 4G function has been activated; 2. Try to restart the phone; 3. Drag down from the top of the screen (or from the bottom to the top) to make sure "Move Data" is on; 4. Set the network mode to 4G priority or turn the 4G switch on (the setting method is as follows: enter [Settings] - [SIM card and mobile network] - [Preferred network type], and select [2G 3G 4G (automatic selection)] as needed.

If there is no network mode setting or you still cannot use 4G after setting, it is recommended to change the phone and card for testing.

Yes, it is supported by the whole network!

If you are using a OnePlus phone and cannot use data to access the Internet, it is recommended to follow the steps below

1. The metal or gold-plated protective shell has a certain shielding effect on the signal, it is recommended that you remove the protective shell to try;

2. Confirm whether the SIM card mobile data service is normal, such as whether the Internet function is enabled, whether there is arrears, whether the mobile phone can recognize the SIM card normally, whether the SIM card is in poor contact with the card slot, etc.;

3. Confirm that the mobile data switch is turned on, you can pull down the status bar from the top of the phone to check whether the mobile data is turned on; If the SIM card is not a local card, you can go to [Settings] - [SIM Card & Data Management] - [SIM Card 1 2], and then enable [Data Roaming].

4. Check whether the traffic limit is set, you can check whether the traffic limit is set in [Settings] - [SIM Card and Traffic Management] - [Traffic ** Limit].

5. To confirm whether the data saving switch is turned on, you can go to [Settings] - [SIM Card and Traffic Management] - [Traffic Management] - [Traffic Saver] and turn off the switch to try;

6. It is recommended that you reset the APN access point, go to Settings > Mobile Network) SIM Card and Traffic Management > select a SIM card > Access Point Name > Click on the upper right corner of Kaiyu":" to reset the access point;

7. If you are in a dense or poor signal area, you may not be able to use the data network, it is recommended that you leave such areas before trying;

8. Try to turn on the airplane mode and then turn it off to search the network again, and upgrade the mobile phone version to the latest;

9. If the problem still cannot be solved, it is recommended to reset the Wi-Fi, Bluetooth and mobile data network settings after backing up the data, path: [Settings] - [Other Settings] - [Reset Phone] - [Reset Wireless Settings].

1. If an application cannot be used as Sun Mao mobile data, you can view it according to the following path: [Settings] - [SIM Card and Traffic Management] - [Traffic Management] - [Application Network Permission Management], click on the corresponding application to view the network permission settings.

There are 4 options in this setting:

Wi-Fi & Mobile Data]: The app can use both mobile data and Wi-Fi networks;

Wi-Fi]: The app can use Wi-Fi networks, but not mobile data;

Mobile data]: The app can use mobile data, but not Wi-Fi;

Disable Network: The app can't use mobile data and Wi-Fi networks.

2. If the traffic you handle is exclusive traffic, you cannot use the data network for applications other than exclusive;

3. Please compare whether the application can access the Internet under the same model and network standard, if both cannot access the Internet, it is a problem of the application's network server.

OnePlus mobile phones support Unicom and mobile 4G, but mobile 4G is supported by the Sui itself, and Unicom 4G is cracked in the later stage of the process, so it is supported. After China Unicom 4G is cracked, the after-sales warranty is returned, and the silver cloth you carry can be tossed to your heart's content, haha.

Dear users: At present, OnePlus mobile phones support mobile 4G, and the mobile phones that currently support Unicom 4G do not have OnePlus mobile phones for the time being. You are welcome to turn off the socks at any time and pay attention to the wonderful business of Unicom.

OnePlus hand bai machine 1 has two versions: Unicom version and mobile version, and each version of the mobile terminal supports zhi's DAO

The network format is as follows:

Unicom version of OnePlus mobile phone 1 support genus.

The network format is as follows:

As can be seen from the parameters in the figure, the mobile terminal supports China Unicom 4G, 3G, 2G network and mobile 2G network.

The mobile version of OnePlus Phone 1 supports the following network standards:

As can be seen from the parameters in the figure, the mobile terminal supports China Unicom 2G network and mobile 4G, 3G, and 2G networks.

Therefore, the Unicom version of OnePlus mobile phone 1 supports Unicom 4G network, and the mobile version of OnePlus mobile phone 1 does not support Unicom 4G network, but supports Unicom 2G network, and you can use Unicom 4G mobile phone card in Unicom 2G network environment.

If you are using OnePlus 1

In the case of China Unicom's 4G version, this version supports China Unicom's 4G network by default. If you use the mobile 4G version, it does not support the 4G network of China Unicom. It is recommended to check the mobile version for understanding.