How much does it cost for Buick Veran to install only a reversing image module

Loading reversing image, first of all, there must be a screen to display the image, if the car has a display screen in the central control, then install a reversing camera on it, the market price, the general camera 100 yuan, the installation requires 80 yuan of labor costs, if there is no screen, then it is necessary to install the entire navigation machine, 4S shop at least 3000 up, the market is more than 1,000 looks. I would like to recommend a few brands to you.

Materials: pliers, rubber sleeves, etc.

First, the front camera installation.

Second, the manufacturer has a pressure reducing pipe. If you go to the safe, you won't smoke in the car, but you will get a lighter.

3. The rear camera has been installed. The Buick Verona's reversing light line is on the left side of the trunk. The second line in the first row is the reversing light line, which can be connected directly. If you're not sure, you can hang up the reversing watch to measure.

Fourth, the last step is to tighten the screws. The camera is in the middle of two license plates.

5. The last step is to complete the interface.

Materials: pliers, glue, etc.

1. Installation of the front camera.

2. The manufacturer has a step-down line, and the cigarette lighter is connected to the cigarette lighter if you don't smoke in the car anyway.

3. Speaking of the rear camera installation, the reversing light line of the Buick Veran is on the left side of the trunk. The second line in the first row is the reversing light line can be directly connected, if you are not at ease, you can hang the reversing meter to measure.

4. The last step is to tighten the screws, and the camera is pressed between the two license plate lights.

5. The last step is the finished interface.

1. The camera of the reversing image can be installed on the license plate lamp shell, or it can be directly fixed with screws at the rear bar position, and Li Bangtong can be installed on the position of the license plate lamp of the license plate frame, which is relatively easy to install;

2. Just use the small screws provided in the camera accessories to fix the camera on the position of the license plate light. Through the adjustment of the iron plate or gasket in the accessories, the camera can achieve the best reversing angle;

3. The wiring of the camera penetrates into the car through the gap of the license plate lamp, and is connected with the power supply of the reversing lamp and the extension cable. This type of installation of the reversing camera is currently one of the more popular ones, with a more discreet appearance and easier installation.

The reason for the reversing image is to inform the driver of the surrounding obstacles with sound or more intuitive display when the car is parked or reversing, so as to relieve the driver of the trouble caused by the front and back and left and right visits when parking, reversing and starting the vehicle, and help the driver to remove the defects of blind spots and blurred vision.

The reason for the reversing image is that when the car is parked or reversing, it can inform the driver of the surrounding obstacles with sound or more intuitive display, which relieves the trouble caused by the driver's parking, reversing and starting the vehicle, and helps the driver to remove the defects of blind spots and blurred vision.

The Happy Edition does not have a reversing image. ”

Valeant Pro focuses on fashion, technology, and trend, as a family car, can it meet the needs of families? Today, let's take a look at the soundtrack enjoyment version of Valeant Pro.

The appearance is also exquisite, and the headlights and the front face are connected very naturally. It is a very favorite design. The body size is 4664*1786*1472mm, the wheelbase is 2700mm, and the size of each configuration is the same.

The wheel hand cheat is 16, Hankook tires, and the same as the high configuration.

The engine is paired with an SVT continuously variable gearbox, which accelerates to 100 kilometers per hour, which is very good for a car series in the same price range. Fuel consumption under official operating conditions. At home, the power and cavity are completely sufficient, and the driving feeling is very good.

Intelligent interconnection is also a relatively big highlight of this car, enough to be equipped with AI voice assistant, you can use voice to realize the opening of the main driving window, navigation, air conditioning, etc., the dialect can also be understood, and the response speed is very fast in 1-2 seconds. The interconnection configuration is almost the same as the high configuration, so it is also good to choose the middle configuration. AutoNavi** navigation and on-board APP can use the car's own traffic.

The steering wheel is made of imitation leather, and the high-end leather is used. Dual screens, cruise control, four-door power windows. The interior color is black and khaki, and the overall look is also very simple and dirt-resistant.

The material texture of the center console is good, it has a sense of design, and the countertop is a soft material. The interior material is better, so even if it is a new car, there is basically no smell in the car.

The safety configuration is also relatively rich, such as hill assist, tire pressure monitoring, reversing radar, etc.

Photo by Pacific Automobile Network Q&A).

The installation method of Regal reversing image is to remove the decorative shell of the trunk pillar, penetrate the camera harness from the original car cable, and then install the license plate light on the camera. And then the wires, the wires. Connect the first line of the camera to the input interface of the intelligent reversing track, connect the main line harness of the intelligent reversing track to the host of the intelligent reversing track, connect the decoder with the red line of the intelligent reversing track, and start the vehicle to hang the reverse gear to test whether the reversing image and the intelligent reversing track are normal.

In order to install a reversing camera, the owner's car must support the reversing camera function, and the signal navigation transmitted from the front or rear of the vehicle must be able to be converted into images. If we damage the original vehicle's wiring while installing navigation or reversing images, the damaged wiring and related wiring and electronic equipment may be denied.

When we choose the reversing image type and navigation, we try to choose the navigation or reversing image that matches the original car socket and is customized for the special car, and try not to damage the original car line, which will not affect the vehicle warranty. When buying navigation and other products, car owners must not think about cheapness and find reliable stores to install. Quality is important, and so is the professionalism of the installation.

Millions of car purchase subsidies.