How to flash the mobile phone, ask the experts to answer step by step, in detail

Flash the machine to split the card and line brush, card brush Please turn off the phone first and then press the volume down and power button at the same time to enter recovery mode, at this time you can flash the machine but in advance to flash the package ** to the root directory of the SD card.

In recovery mode, select the fourth item, Flash Zip from SDCARD.

Then you will see all the zip files in the SD card, just named mainly to facilitate the search for the ROM package, find the ROM you put in the SD card, click the trackball to confirm.

After clicking on the new ROM you want to flash, you will enter the following page, and then press the home button to start flashing automatically.

Don't move your phone during the flashing process, just wait for a while.

When "Install from SDCacardComplete" appears at the bottom of the screen and you return to the recovery homepage, it means that the flashing is successful!

After flashing, it is best to reset the phone, you need to go to the fifth item in the recovery menu, wipe.

After selecting the "Wipe" option, the following screen will appear. The first item is to restore the factory value of the phone, the second item is to clear the cache, the third item is to clear the second partition content of the SD card, the fourth item is to clear the battery usage record, and the fifth item is to clear the gravity sensing settings. After clicking on each item, a prompt will pop up, press the home button to start clearing.

Finally, select Reboot System Now in the first item of the R ecovery menu to reboot your phone, and the flashing process is complete.

After the installation of any flashing software (such as: flashing wizard, etc.) is completed, connect the phone to the computer through the data cable, and then follow the flashing software prompts step by step!

Android or iOS or WP or Alibaba Cloud?

To put it simply: 1. Go to the Internet (on the forum)**A ROM, which is the system file you want to brush, in zip format, and then put this zip file into the root directory of the SDCARD of OPPO T703, and close OPPO T703.

2. Press the volume down button + power button at the same time to turn on the OPPO T703 and enter Recovery Mode.

3. Press the home keyboard of OPPO T703, and the menu appears.

4. Use the volume plus or minus keys of OPPO T703 to control the options, check "Apply update from SDCARD", and then press the Menu button to enter.

5. Select the zip file and press the menu button to confirm.

6. OPPO T703 starts to flash, please wait for installation.

7. After the flashing is completed, it will prompt install from sdcard complete.

8. Select Reboot System Now, OPPO T703 will automatically reboot and can be used normally after booting.

Remember to back up your contacts, text messages or something before swiping, and the machine will be gone after swiping.

Look at the model, the method is different for different models.

Use the bell pepper brush machine assistant, one-click brushing, very convenient. It is recommended to study on the Jifeng Forum often.

How much? I heard that it is a sky-high price, right?

As for these software installations, ......I just installed it directly on the C drive, and the only thing I could use was RSD lite anyway. Everything is ready to go!! Now we're going to do it!!

Step 1: As shown in the figure below After turning on the computer like this, a red screen is displayed to enter AP mode, as shown in the following figure: then wait for about 10 seconds, press the voice button again, enter BP mode Now, you can use a data cable to connect with the computer.

After connecting, there will be the following after installing the moto driver, and then enter RSD lite, as shown in the figure below, after opening, the following is displayed The specific loading software method is as follows: First, we load the BP file according to the method shown above, and then press the start key to start brushing BP, BP brushes quickly, and after a while, RSD will prompt when prompted"please manual power-up this phone"(Please restart your phone manually). At this time, pull out the data cable, cut off the battery, and then install the battery, then press and hold the voice button, and then press the power button to enter the AP mode, (no need to enter the BP mode anymore) to connect to the computer, if you use RSD or above (including) software, you can see the finished pass in the same position in the picture above, indicating that the BP has been brushed. It's time to flash the AP.,Load the AP file in the same way as loading BP.,And then press Start The long wait begins,(In fact, it's only about 20 minutes) This is the most nervous time for everyone.,See the screen suddenly go dark.,Don't panic.,This is a normal state.,Wait......... it's a minute.During this time, it is best not to move the data cable or the computer.

When it's time for your beloved phone to turn on automatically, you're done! Note that sometimes the phone has been turned on and RSD Lite is still moving, so wait for it to finish and then unplug it, wait"please manual power-up this phone"Appear, haha, that's it all done, see if your e2 has changed a lot?? Go to the phone's settings to view the attributes, if the AP and BP attributes are the same!

Then congratulations, you succeeded! Finally, don't forget to reset the main phone every time you finish brushing it ("reset" is on top of the "properties") Enter the settings--- the phone settings --- reset --- the main reset --- password 000000 The phone will automatically restart after the reset, and there will be about 5 seconds to display English, don't be afraid, it will be fine in a while. It's finally done, it's already 2 o'clock in the morning, and I hope to give you some help.

When the flashing machine is not brushed, it may not turn on (I have encountered it), at this time, just cut off the battery, and then put it on, you can turn it on. >

Answer pro, hello, I'm glad to answer your question, long press the volume down button + power button, slide to power off, first press the volume plus key, then press the volume down button, then long press the power button, when the apple logo appears, release the power button, and then continue to press and hold the power button until you enter recovery, if you fail to enter recovery mode, try a few more times.

The question is asked, but mine is an Android phone.

2. After turning off the phone, press and hold the volume down button and the power button at the same time, and press and hold for 3 seconds to enter recovery mode;

3. After turning off the phone, press and hold the volume up button, home button and power button at the same time, and release the power button (volume + and home button continue to hold down) after the phone vibrates. Operate the phone to enter recovery mode and perform the double-clear operation

Wipe Data Factory Reset: Erase user data and restore to factory settings (an option that must be performed before flashing).

wipe cache partition: Clear the system cache (this is required before flashing.) If there is a problem with the system, you can also try this option, which can generally be solved).

4. Enter the recovery mode again, and then click on the flashing package file to start flashing.

Install Zip from SDCARD: installs the update package on the SD card of the mobile phone (you can run a zip upgrade package with any name, and the name of the update package is not limited).

5. After flashing, restart your phone and restore your phone data.

reboot system now: Reboot the phone (select this option to reboot the system after flashing).

Go to the e770 forum to flash the package and tutorial carefully.