How do you like things that you used to get tired of again?

Some people use things for a long time, and they use them for a long time to change, even if they are new, they are still reluctant to throw them away, and keep them in the room well, just like when people treat feelings, they have had a vigorous love, but they can't go together, and they can only keep those beautiful memories in their own memories! If you are talking about the same thing, even if you change it, no one will think that you are a person who likes the new and hates the old, and people have the same feelings, even if they can't be partners, but in the other party's heart, they may think that you are still very good, and they will not forget you.

I don't think this kind of nasty thing usually falls in love with you unless you find out that it's very important to you, or something changes your mind.

If you want to like something that you were tired of before, then you must discover his new strengths, and you must understand him deeply to have a chance to like it again.

Since it's something you're tired of playing, there's no need to like it again, because if you play it for a while, you'll still feel tired.

I like things that I was tired of before, and this depends on my own point of view, and if I change my point of view, I feel that everything is good.

Adjust your mentality, the things you were tired of before have an endless aftertaste, after all, you have been with you for a long time, and you can't forget your roots.

This could put it in another position, or let him do something else.

In fact, you can consider a more high-end decoration, that is, to decorate the wall with wooden boards, comfortable, elegant, environmentally friendly, a family's words, a little reference.

Use wallpapers, it's beautiful and stylish.

The easiest way is, of course, to find a professional painter to do it, Dulux's home is easy to paint is not bad, the master is professional, the business quality is high, the service is considerate, **affordable, I invite them, you can refer to it.

A search on the Internet has come out! Now the decoration is environmentally friendly, and I am afraid of toxic substances such as formaldehyde. The environmental protection of wall paint is very low, and it is easy to be contaminated with dirt and is not easy to clean.

Now the wall is more hot than the wallpaper, environmental protection and health is also beautiful, you can also directly clean with clean water, the best choice of wallpaper is Ruibao, Shengxiang such a well-known domestic brand, brand ***, after-sales service is also good.

If the previous normal color is a lighter color, if you want to change the color again, you can brush it again, if the previous color is darker, now the color must not be covered, you have to delete all the previous latex paint and putty.

What are you not satisfied with, if you want to start from the new, can you cover the previous color to step on thousands? You have to cut out the purple color to be satisfied with yourself.

The landlord can shovel off the cracked part and use putty to fill it, and then apply cleanser to brush latex paint and wallpaper paint after drying, and then you can do printing! I'm making liquid wallpapers, if you need to, you can add my friends to chat in detail!

If there is a crack in the wall, putty should be worn. After the putty is done, the liquid wallpaper will give you a primer to paint. (Depending on the cracks in the wall, if necessary, the skin of the wall with serious cracks needs to be removed).

Directly batch putty, after the putty dries, apply latex paint, and then do printing, landlord, in fact, you don't need to worry about this, please build people, they will take care of everything! Hehe.

If the wall is flat and there is no need to shovel it, you can consider scraping it directly with elastic putty, or directly brushing latex paint before printing. I'm just working on liquid wallpapers.

No, just polish the place where the wall touches, and brush the surface with varnish to paste the wallpaper.

If the wall is not too problematic, just make a primer on it, and then make a liquid wallpaper and you're good to go.

Shovel off and scrape putty, and then paint.

It doesn't have to be shoveled, it depends.

Splash it with water, if the wall peels off, you have to shovel, and vice versa.

I didn't shovel it.

I recommend shoveling it off, because 99% of the walls are made of old powder putty, which is not resistant to water and has no adhesion.

No need. The putty on the walls of new houses is generally polished. If not dirty. And smooth and flat words. Just paint the walls directly, why waste it.

Therefore, before the formal construction, the original wall needs to be scraped off. It is necessary to remove the original white ash first, and then apply the interface agent. The cement layer is sealed and connected.

After the original wall surface has been removed, the wall can be leveled twice. The first layer is the lowest level of wall leveling. Plaster is generally used for leveling.

When the flatness detection error is large, more than 10mm, cement leveling can be used. Cement leveling and gypsum leveling are both rough leveling. Another leveling is fine leveling, that is, putty leveling that is often used.

Of course, it is necessary to shovel off, the old putty layer and the new putty layer will repel each other. No matter how well you scrape the surface, if there is a problem inside, it will always affect the surface. Shovel until the cement layer is seen, and then use white cement and 801 glue to stir together for priming, and then scrape putty on the surface, so that there will be no anti-moisture, peeling and mildew in the future.

It is recommended to [Shenshi colorful environmental protection latex paint].

Check whether the wall is painted with putty (big white wall), if it is a cement self-house, it is not recommended to paint latex paint directly, you can paint latex paint after brushing putty.

If there is putty, check whether the wall is peeled, black and mildew, if there is a peeling situation, you need to use a gray knife or other tools to shovel off the peeled part, and then use sandpaper to polish and flat, if you find that the cement wall is exposed after grinding, you can use the wall paste (putty paste) to repair and level, if there is mildew and blackening, directly use sandpaper to polish and flatten.

After the wall is treated, cover the socket and the edge of the wall on the wall, and cover the ground with newspaper or plastic protective film to prevent the socket from being brushed or paint dripping onto the ground during the painting process.

Start painting: stir the paint slightly before brushing, and then use a roller brush to dip the paint to paint, you can pause slightly when the paint is dipped out, to prevent most of the paint from dripping to the ground, please roll the brush from one side to the other side of the wall in turn, the first time do not need to paint too thick, some places are not covered well can also be brushed all the time, after the brush is finished, paint the corners of the wall with a brush.

After the first surface is dry, start to paint the second time, the same is also from one side of the wall to the other side up and down the brush in turn, after the painting can basically achieve the effect of complete covering, individual places are not completely covered, can be repaired after painting. After the second brushing, start drying, and it is recommended to open the window for ventilation during the drying process to speed up the drying time.

Precautions: Do not paint one place again and again, it will cause thicker paint in some places, resulting in different colors from other places, and it is easy to cause insufficient paint in the end.

Repainting the wall belongs to the category of old house renovation, before the wall is redecorated, in order to prevent the trouble caused by the problems caused by the old wall after a long period of use, it is necessary to remove the base layer of the old wall and reprocess, which is commonly known as "shoveling the wall skin".

First, the wall of the old house is prone to problems:

1. Wall chalking.

Causes: Low temperature construction; excessive dilution; The coating is too thin; No primer is used; The substrate is loose.

Solution: Remove the chalking part until a firm base is exposed, then recoat the primer.

2. The gloss of the wall rises.

Causes: Use of matte paint in areas with frequent movement; frequent scrubbing; Objects rubbed against walls; The paint used has poor scrub resistance.

Solution: Use high-quality paint to recoat, and choose semi-gloss or high-gloss paint where you move around frequently; Clean the surface of the paint film with a soft cloth or rubbing an item with little damage, and clean water.

3. The wall is cracked and peeled.

Causes: Use of inferior paints; Over-dilution or over-thick coating; Improper surface treatment, such as putty is too thick, loose, and has poor durability; Cracking of the paint film caused by cracking of the substrate; The paint is too hard or brittle due to age.

Solution: Brush off loose objects, sand the surface, and grind the edges; Use as little putty as possible with some durability and water resistance.

Second, the method of old wall treatment:

1) The wall surface of ordinary old houses generally needs to be removed from the original paint surface, and the method is to spray the surface layer with water first, and then use a mud knife or planer to remove the surface paint surface;

2) For the old wall that has been in disrepair for a long time, the surface has been seriously painted off, and the ironing layer is silty and sandy, and the paint layer and the entire ironing need to be removed until the cement or brick layer is seen;

3) Rearrange and level the treated base layer, and then carry out the secondary treatment of gypsum or cement base, and carry out the construction and secondary painting of waterproof putty after the base is completely dry, and so that the waterproof putty is completely dry, and the wall painting construction can be carried out.

Jin Sanyou shares the bits and pieces of decoration every day Beijing Jin Sanyou Decoration Ten years of professionalism Focus on quality If you have any decoration problems, you can leave us a message, we also provide professional services such as house inspection, room measurement, design, etc.!

Our second-hand house wall craft:

1. Shovel to the cement layer;

2. Brush the interface enhancer to seal the wall;

3. Scrape 1 time with coarse leveling;

4. Use fine leveling 2 times;

5. Sanding and brushing paint.

Your plan is unscientific and will leave sequelae on the wall!

As long as there is peeling on the wall, it must be shoveled! Shovel out the old walls! Scrape the plaster 2 more times!

The last batch of putty scraped 2 times!! Roll latex paint again, the wall you said above is uneven, and you see the black cement wall!! That's because the workers you hired are too poor!

Any apprentice who has been studying for 3 months will not be like that!

Hello, it depends on the severity of the wall problem. Take the old house with prefabricated red brick structure in the 80s and 90s, the wall of the house itself has very serious problems, such as serious dampness, obvious mold, peeling, falling off and other serious problems, it is recommended to eradicate the red bricks, so as to completely **. If it is a new house that is not very old, there is no obvious wall problem, the wall is smooth and stable, and you can also choose to polish off the original paint layer and apply the paint directly.

However, if the local wall has mildew and moisture, it is necessary to shovel the cement layer around those areas, apply the wall reinforcement, and then re-level and paint with putty.

It is also a kind of wall solidification, which can be used in theory.

If the deviation of the normal wall is large, first use the base plaster to hit the bottom, and then scrape the putty, which is generally 2 times; After the putty is dry, polish it, and finally apply the paint 2-3 times.

According to what you said, the oiler master will remove the original wall putty discoloration, peeling, bulging and other defects, and then deal with the problem will not be too big, and the paint wall will also depend on the temperature difference and humidity of the room in the future.

You don't have to worry about this! There will be no problems, putty will not appear this kind of peeling.

If you are tired of her now, you can calm down for a while, think about the happiness you didn't have at the beginning, the relationship needs to be run-in, if you think your girlfriend is really a good girl, don't give up on her.

You just don't want to think about her for a while, and then think about her good after a while

I don't know, I've never been in a relationship in my life.

Find something to do together, maybe in the cold season.

[Old wall decoration scraping putty].

1.First, check whether the wall is hollow, and if there is a local shovel and plastering cement mortar.

In the case of no hollowing, sandpaper sanding, due to the contrast between the old and new colors, you will find that the wall is uneven, apply it with diluted 108 glue as an interface agent, and let it dry.

2.Use construction putty paste or putty powder with water (large white powder mainly prepared with calcium carbonate) to level the potholes and let them dry. 250 sandpaper sanding, sweep the remaining ash, then use putty paste to level, let dry, continue the sandpaper sanding, sweep the remaining ash.

3.Apply latex paint. The primer is added with very little black ink (to a light gray transition color, the purpose is to cover the old paint and putty, to prevent a variety of colors that cannot be covered) once, and then apply the latex topcoat 1 or 2 times after drying.

Anti-magnetic materials are easy to crack, not easy to paint, the simple is to use a shovel blade to shovel off the edges of the gaps, clean up, and scrape again, the complex is to shovel off the putty and redo it.

First of all, the discoloration and the places that fall off are snatched down, it is best to grab some of the discoloration and falling off around, and then use gypsum powder and paste to pack, scrape flat with a scraper or greasy knife, latex paint can be used, but I don't know if you use all or make up which piece of brush, if you brush the one you make, it is possible that you will have a little color difference with the previous one.

Melamine can no longer be painted with latex.

You scrape off the bad parts, shovel off all the unstrong parts and then put a cloth, or kraft paper, and use white latex.

Then just scrape the melamine directly, just level.

Melamine putty is an extremely unscientific material, to put it bluntly, it is lime. The shaving that emerged in the 80s is just that.

We strongly resist this kind of products, basically in large and medium-sized cities can not see the traces of such products, but remote areas are still more popular, there are several reasons, the main point is that the local people are cheap, feel that the paint is expensive, so choose melamine. The surface of melamine is a dense calcified layer, like an egg shell, but the wall surface is affected by many factors, and such a wall surface is very durable.

The most important point is that I think lime is very alkaline and is not suitable for people to live in.