The difference between a washing machine and a drum washing machine

Because of gravity, the drum washing machine is not so dry, the drum washing machine is mainly used to care for clothes washing, generally washing clothes such as dust is no problem, but there is grease and the like to be pre-treated, and then put it in to wash, be sure to use 30 degrees of warm water function, because this will increase the biological enzyme activity in the laundry detergent, and it will be clean, provided that your laundry detergent has no biological enzymes added (recommended: Aomiao, Ba Xiang, etc., they have written biological active enzymes in the back. It turns out:

The active enzyme is cleaner than the laundry detergent without active enzyme (comparison brand: Liby, contrast substance: blood stains, and it has been dried for more than 3 days.)

Generally, the energy label of the washing machine has indicated the degree of cleanliness, more than 60%, are nationally recognized, the most important thing for the drum washing machine is that the diameter of the inner drum should be large, so that the hammering effect is better, and the washing is much cleaner, in addition, the drum can not put too many clothes, otherwise the clothes have no space to fall and how can there be a hammering effect, it can not be cleaned, right.

Very normal, the characteristic of a front-loading washing machine is this, washing very gently.

Normally, it will take longer to wash than to stir, but this kind of washing will protect the clothes much better.

Depending on how many revolutions of the washing machine you bought, if it is 800 revolutions, I can only say that you will use it

You can't just look at the washing ratio, in fact, if the drum is not heated and washed, there is no wave wheel washing at all, just because the wave wheel washes clothes are more worn, and the clothes are not worn, they are washed!!

Washing machine:

The bottom of the barrel of the washing machine is equipped with a disc wheel with protruding ribs. Driven by the wave wheel, the water flow in the bucket forms a vortex that sometimes rotates right and sometimes left, driving the fabric to rotate and tumble with it, so that the dirt on the clothes can be removed.

Drum washing machine:

The drum washing machine originated in Europe, and the washing method is designed to imitate the principle of beating clothes with a stick hammer. The drum washing machine is made of stainless steel inner barrel, mechanical program controller, phosphating, electrophoresis, spraying triple protection of the shell, and a number of bulky cement blocks to balance the huge centrifugal force generated when the drum rotates to do repetitive motion, plus the joint action of washing powder and water to make the clothes clean.

Differences: First, the difference in cleaning power.

1. Drum washing machine, with the drum rotating and with the pounding board and water filling round holes to achieve the effect of rubbing, kneading, patting and beating to wash the clothes.

2. The washing machine only relies on the strong water flow to drive the clothes to rotate in the water and wash and rub with water to achieve the purpose of laundry, so the washing process of the washing machine lacks the effect of rubbing, kneading, patting and beating, and the cleanliness is not as good as that of the drum machine.

Second, the pre-washing stroke is different.

For dirtier laundry, the pre-wash stroke of the front-loading washing machine will remove the sewage after the pre-wash, and then use clean water and lotion for the main wash stroke. However, the pre-washing stroke of the washing machine only extends the soaking time, and the water and detergent are not changed during the main washing, so it cannot effectively achieve the enhanced pre-washing effect.

3. The composition of clothing damage is different.

1. The washing machine must use a strong water flow to drive the clothes to rotate in the water, so not only the strong water flow will pull the clothes, but also the clothes are easy to pull and entangle each other due to rotation, resulting in damage to the clothes.

2. The drum washing machine is to rub, knead, pat and beat the clothes by rotating the drum, although there will also be a strong rotation and pulling tangled phenomenon, but it is relatively not too much to hurt the clothes.

Fourth, the volume and size are different.

Due to the principle of side door opening, the drum washing machine can be placed with a built-in design, which is more convenient; However, due to the small size of the washing machine, many consumers who choose to put the washing machine in the bathroom or balcony still prefer the washing machine.

Fifth, the water and electricity consumption is different.

1. The washing power of the drum washing machine is generally about 200 watts, if the water temperature is increased to 60 degrees Celsius, it generally takes more than l00 minutes to wash clothes once, and the power consumption is about the degree.

2. The power of the washing machine is generally about 400 watts, and it only takes 40 minutes to wash clothes at most, less than electricity. In terms of water consumption, front-loading washing machines are about 40% to 50% of those of wave wheel washing machines.

6. Length of washing time:

If you require a short washing time, it is recommended to buy a washing machine. And after activation, the wave wheel can still be easily loaded with clothes. Nowadays, there are also some rollers that can be added halfway, but they are not very common yet.

Please add a detailed explanation.

The difference between a washing machine wheel and a drum is the amount of electricity, the amount of water used, and the degree of care for the clothes.

Unit power consumption refers to the ratio of the power consumption of the washing machine to the rated capacity of the working cycle (unit: kilowatt-hours per cycle kg), the power consumption of the working cycle refers to the sum of the power consumption of a complete operation of a half-load washing and half of the power consumption of a full-load washing, and the rated capacity is the nominal capacity of the washing machine, such as 8kg, then the above-mentioned half load is 4kg, and the full load is 8kg. The national standard divides different grades for washing machines, and the unit power consumption of the two washing machines under different grades is:

Water consumption per unit of efficiency refers to the ratio of the water consumption of the washing machine to the rated capacity during the working cycle (unit: liters per cycle, kilograms), which is similar to the unit efficiency power consumption. In the national standard, the water consumption per unit function of the two washing machines under different grades is as follows:

This is because the structure of the two washing machines is different, the principle of removing stains is also different, the washing machine simulates manual scrubbing, mainly through the friction between clothes and clothes, and the friction between clothes and the barrel wall of the washing machine to remove stains, in the washing process, the water needs to completely soak the clothes, and the drum washing machine mainly lifts, falls, beats and other steps to remove stains through the lifting rib washboard in the inner barrel, and only a small amount of water is needed to completely wet the clothes during the washing process, so the washing machine consumes more water than the drum washing machine.

Abrasion rate: The ratio of the mass lost during the washing of the garment to the mass of the original garment. The lower the ratio, the less wear and tear, indicating that the washing machine is also less damaging to the fabric. The national standard for the wear rate requirements of the two washing machines are as follows:

It can be seen that the wear rate of the drum washing machine is lower than that of the wave wheel washing machine, and the damage to the clothes is less, and it is more suitable for some easily worn fabrics, such as wool clothes, silk fabrics, etc., which are more suitable for washing with the drum washing machine.

Summary. Wave wheel washing machine is a type of washing machine, which is driven by an electric motor to rotate, and the clothes are constantly tumbling up and down with the water. Its structure is relatively simple, easy to maintain, and the washing rate is high, but the wear rate of clothing is large and the water is more; The advantage is that the clothes are not winded, the washing is uniform, and the damage rate is low.

What is a washing machine called a wave wheel? What is a roller? Is there any difference?

The wave wheel washing machine is a kind of washing machine, which is driven by an electric motor to rotate, and the clothes are constantly tumbling up and down with the water. Its structure is relatively simple, easy to maintain, and the washing rate is high, but the wear rate of clothing is large and the water is more; The advantages of the shirt are that the clothes are stuffy, the cavity is small, the washing is uniform, and the damage rate is low.

Kiss. Hello. This drum washing machine is made of stainless steel inner barrel, mechanical program controller, phosphating, electrophoresis, spraying and coating of the shell and ruler, and a number of bulky cement blocks to balance the huge centrifugal force generated when the drum rotates to make repetitive movements, plus the joint action of washing powder and water to make the clothes clean.

Kiss. Hello. It is on the top of the flip from above, and on the drum washing machine is added from the bottom of the clothes pro.

Difference Between Washing Machine Drum and Wave Wheel:

1. The cleanliness degree and wear rate are different.

In terms of cleanliness, there is little difference between the washing machine and the drum washing machine, among which the washing uniformity of the drum is good and the wear rate of the drum is small. The washing ratio of the washing machine should be greater than that of the drum washing machine. The wear rate of the wave car megafiber wheel type should be less than that of the drum type.

The drum washing machine is rotated by the drum, the clothes are lifted by the protrusion ribs, and the clothes fall freely by gravity, simulating hand rubbing, the washing degree is uniform, the clothing damage rate is low, the clothes are not easy to be entangled, and even high-end clothes such as silk and wool can be washed.

The washing machine relies on the vortex current generated by the high-speed operation of the roller to impact the clothes, and washes the clothes with the help of detergent.

2. Water consumption and electricity consumption are different.

The washing power of the drum washing machine is generally about 200 watts, and the dehydration is proportional to the speed, if the water temperature is increased to 60 degrees, it generally takes more than 100 minutes to wash the clothes once, and the power consumption is about the degree, if the drying imitation is dry, the time is related to the texture of the clothes, at least 40 minutes.

Therefore, it is better for users to have a 10 amp meter in order to use its drying function without causing the meter to "trip". In contrast, the power of a washing machine is generally around 400 watts, and it only takes 40 minutes to wash clothes at most, so the power consumption is much smaller. In terms of water consumption, the drum washing machine is about 40-50% of the wave wheel.

3. **Different.

As for the ** aspect, there is no doubt that the drum washing machine is cheaper, and the drum product ** is generally higher.

4. The floor area is different.

The top-loading front-loading washing machine has the smallest footprint of about square meters, while other front-loading and wave-wheel washing machines have a similar footprint. Recently, there have been a number of ultra-thin products on the market, which have also saved a lot of space.