Problems with memory pins, problems with memory slots possibly motherboard failure .

Not the same. You can't plug in DDR memory.

The pins are not the same.

One is 168

One is 184

This kind of failure is generally caused by poor contact between the memory module and the motherboard memory slot, as long as the eraser is used to wipe its gold finger back and forth to solve the problem (do not use alcohol to clean), and there is also a memory damage or a problem with the motherboard memory slot will also cause this kind of failure.

Due to the memory module, there is no display failure when booted, and the host speaker will generally beep for a long time (for Award BIOS).

Common fault 2: The Windows registry is often corrupted for no reason, and the user is asked to restore it.

Such faults are usually caused by poor quality memory modules, which are difficult to repair and can only be replaced.

Common fault 3: Windows often enters safe mode automatically.

This type of failure is generally caused by the incompatibility of the motherboard with the memory module or the poor quality of the memory module, which is common in high-frequency memory used on some motherboards that do not support this frequency memory module.

Common fault 4: random crash.

This type of failure is generally due to the use of several memory modules with different chips, and a time difference occurs due to the different speed of each memory module, resulting in death.

machine, you can reduce the memory speed in the CMOS settings to solve the problem, otherwise, you have to use the same type of memory. There is also a possibility that the memory module is incompatible with the motherboard, which is generally rare, and it is also possible that the memory module is in poor contact with the motherboard and causes the computer to crash randomly. 01

Common fault 5: System resources decrease when memory increases.

This phenomenon is generally caused by the incompatibility of the motherboard with the memory, and is commonly used on some motherboards that do not support this frequency memory module.

Common fault 6: When running some software, there is often a message that the memory is insufficient.

This phenomenon is generally caused by the lack of remaining space in the system disk, you can delete some useless files, leave more space, and generally keep it in.

About 300m is appropriate.

Both interfaces are also non-common ......The landlord was disappointed ......

Of course it's different, backward compatible.

1 Plug in Can one of them be turned on?

2 Can DDR3 memory of different brands and parameters be turned on?

If you change to other brands of memory modules, insert any of them, and do not plug in the memory, the computer motherboard can not be turned on directly, it is estimated that it is a motherboard design problem, you can try to update the motherboard BIOS and clear the motherboard CMOS settings (short circuit jumper or unplug the motherboard battery after power failure) to reinstall the memory, if it is still not recommended to contact Yingtai technical support or send it to after-sales, it is still invalid and I can't help it, it may be a motherboard design bug.