The problem with the scrollbar when booting up, so adjust the scrollbar time that will appear when b

First of all, open "System Properties" (right-click - Properties on my computer, or open "System" in the control panel, shortcut win+pause break) click the "Advanced" tab, open "Settings" in the "Startup and Failback" area, remove the two in the "System Startup" area, and if it is a multi-system user, keep the "Time to display the list of operating systems". Click "" to make sure that the additional property of the startup item is fastdetect instead of nodetect, and do not add the noguiboot attribute first, because guiboot will be used later.

The next step is very important, open the "Hardware" tab in "System Properties", open "Device Manager", "IDE ATA ATAPI Controller", double-click to open the "Secondary IDE Channel" properties, click the "Advanced Settings" tab, change the delivery mode of devices 1 and 2 to DMA if available, select "None" if the device type can be selected, click OK to complete the setting, and set the "Primary IDE Channel" in the same way.

Now the startup acceleration has been completed, but since the startup is accelerated, by the way, let's speed up the shutdown as well.

Open the registry (Start-Run-Regedit), click "My Computer" to open "Find" in the "" menu, enter AutoEndTasks, and click "Find Next". Double-click to open the found result, and modify the "Numerical Data" to 1. Then under AutoEndTasks you can find hungapptimeout, waittokillapptimeout, set the "numerical data" to 2000 or less, here by the way, also modify the time of the menu delay, find the menushowdelay below autoendtasks, the value is in milliseconds, if you want to remove the menu delay, set it to 0.

Now that the acceleration of startup and shutdown has been completed, restart the computer to feel the feeling of fast startup, and the scroll bar is OK after only one or two turns.

After enjoying the fun of the fast reboot, we will further speed up the startup, open the "System Properties" - "Advanced" - "Startup and Failback" settings, open the "System Startup" area, and add noguiboot after fastdetect, so that the scroll bar will no longer be displayed at startup. If you really like the scroll bar display, you don't need to do this step.

There is no such statement, but my machine only needs 2-3 laps to get it, and it generally depends on how much you boot up and load the program.

Some software can solve the problem, you just need to search for it, but it won't speed up much.

This,If there is nothing wrong with the system,It's related to the host hardware.,Maybe it's a problem with the memory module.,I don't understand this.,Most of them should be related to hard disk reading.,For example, if the hard disk is a solid state drive,The boot speed,It's not a little bit or two.,It's about a dozen seconds.,This more than ten seconds of time.,It's very fast.,And the ordinary mechanical hard disk is not good.,But this SSD's **?,Or look at it.,It's more than 10,000 a piece.,Kingston first developed and produced his should be good,** , SSDs are all at this price, too expensive,

I don't understand this, and I want to know that it should be system-related.